Introduction
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your EVERCROSS 6.5'' App-Enabled Bluetooth Hoverboard. Please read this manual thoroughly before first use to ensure a safe and enjoyable riding experience. Retain this manual for future reference.
Safety Guidelines
Operating a hoverboard carries inherent risks. Adhering to these safety guidelines is crucial to prevent injury or damage.
- Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads.
- Ensure the hoverboard is fully charged before each use.
- Do not ride under the influence of alcohol or drugs.
- Observe local traffic laws and regulations.
- Avoid riding on uneven surfaces, steep slopes exceeding 15 degrees, or near obstacles.
- The maximum weight capacity is 220 lbs. Do not exceed this limit.
- Children should only operate the hoverboard under adult supervision.
- Be aware of your surroundings and other people or objects.
- The Gyro Stabilization System assists with balance, but users must still maintain control.
- Pay attention to safety system warnings, such as high-speed reminders and low battery alerts.
Package Contents
Upon opening the package, verify that all items are present and in good condition:
- EVERCROSS 6.5'' App-Enabled Bluetooth Hoverboard
- Charger
- User Manual (this document)
Setup
1. Charging the Hoverboard
Before initial use, fully charge the hoverboard. Connect the charger to the charging port on the hoverboard and then plug it into a standard electrical outlet. The indicator light on the charger will change (e.g., from red to green) when charging is complete. Disconnect the charger once fully charged.
Image: The EVERCROSS hoverboard connected to its power adapter for charging.
2. Initial Calibration
If the hoverboard does not seem balanced or responsive, it may require calibration:
- Place the hoverboard on a flat, level surface.
- Ensure the hoverboard is powered off.
- Press and hold the power button for approximately 5-10 seconds until the indicator lights flash.
- Release the button and wait for the lights to stop flashing, indicating successful calibration.
3. App Connection (Bluetooth)
The EVERCROSS hoverboard features app connectivity for enhanced control and monitoring:
- Download the official EVERCROSS app from your device's app store.
- Ensure Bluetooth is enabled on your smartphone.
- Power on the hoverboard.
- Open the EVERCROSS app and follow the on-screen instructions to pair with your hoverboard.
- Once connected, you can customize riding modes, adjust sensitivity, monitor battery and speed, and play music through the built-in Bluetooth speaker.
Image: A smartphone displaying the EVERCROSS app interface, showing various control and monitoring options for the hoverboard.
Operating the Hoverboard
Riding Basics
Learning to ride takes practice. Start in a safe, open area with assistance if needed.
- Mounting: Place one foot firmly on a footpad, then quickly step up with the other foot. Maintain a relaxed posture.
- Forward/Backward: Lean slightly forward to move forward, and slightly backward to move backward.
- Turning: To turn left, press your right foot forward. To turn right, press your left foot forward.
- Dismounting: Step off one foot at a time, preferably backward.
Image: The EVERCROSS hoverboard in a vibrant pink color, showcasing its glowing pedals and wheels.
App Features and Customization
The EVERCROSS app provides advanced control over your hoverboard's functions:
- Riding Mode Selection: Choose between different riding modes (e.g., beginner, normal, advanced) to adjust acceleration and responsiveness.
- Sensitivity Adjustment: Fine-tune how responsive the hoverboard is to your movements.
- GPS Real-time Positioning: Track your hoverboard's location.
- Music Playback: Connect your phone to the hoverboard's Bluetooth speaker to play music during your ride.
- Intelligent Monitoring: View real-time battery level, speed, and distance traveled.
Lights and Aesthetics
The hoverboard features colorful glowing pedals, super bright LED lights, and flashing wheels for enhanced visibility and a dynamic appearance.
Image: The hoverboard illuminated with colorful lights, highlighting its Bluetooth music capability.
Image: A display of multiple EVERCROSS hoverboards, demonstrating the variety of color changes and the cool glow pedal feature.
Maintenance
Battery Care
- To prolong battery life, avoid completely draining the battery before recharging.
- Charge the hoverboard regularly, even if not in use, to maintain battery health.
- Store the hoverboard in a cool, dry place away from direct sunlight and extreme temperatures.
- The built-in Protection Circuits System helps prevent overheating and fire, but proper charging practices are still essential.
Cleaning and Storage
- Wipe the hoverboard with a damp cloth to remove dirt and dust. Do not use harsh chemicals or abrasive cleaners.
- Ensure the hoverboard is dry before storing or charging.
- When storing for extended periods, charge the battery to about 50% and recharge every 2-3 months.
Troubleshooting
This section addresses common issues you might encounter with your EVERCROSS hoverboard.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hoverboard not turning on. | Low battery; Power button not pressed correctly. | Charge the hoverboard fully. Press and hold the power button firmly. |
| Hoverboard not balancing correctly. | Needs calibration; Uneven surface. | Perform a calibration as described in the Setup section. Move to a flat, level surface. |
| Bluetooth connection issues. | Bluetooth off on device; Hoverboard not in pairing mode; App issue. | Ensure Bluetooth is on. Restart hoverboard and app. Try re-pairing. |
| Reduced speed or range. | Low battery; Overweight rider; Riding conditions (e.g., uphill, rough terrain). | Charge fully. Ensure rider weight is within limits. Ride on smoother, flatter surfaces. |
| Unusual noises or vibrations. | Loose components; Internal issue. | Stop using immediately. Contact customer support for assistance. Do not attempt to repair yourself. |
Specifications
Key technical specifications for the EVERCROSS EV2 Hoverboard:
- Model: EV2
- Dimensions (L x W x H): 24.29 x 9.17 x 8.58 inches
- Weight: 6.95 Kilograms
- Material: Plastic
- Color: ROSE RED (available in other colors)
- Maximum Speed: Up to 9.32 mph (15 Kilometers per Hour)
- Maximum Range: Up to 6.2 miles (varies with conditions)
- Max Climbing Angle: Up to 15°
- Max Load Capacity: 220 lbs
- Tire Size: 6.5 inches Solid Tire
- Motor Type: Dual Brushless Motors
- Special Features: App-Enabled Control, Bluetooth Speaker, LED Lights, Flashing Wheels, Gyro Stabilization System
- Included: Charger
Image: A diagram illustrating the hoverboard's dimensions (23.7 inches length, 7 inches height) and key features like 6.5-inch solid tires, 25-degree slope capability, 165 pounds weight capacity, and PC fireproof material.
Image: An internal view highlighting the dual torque brushless motor, emphasizing its strong capacity and battery life.
Customer Support
For any questions, concerns, or technical assistance regarding your EVERCROSS hoverboard, please contact our customer support team. Refer to the product packaging or the official EVERCROSS website for the most current contact information.
Our team is dedicated to providing responsive and helpful service to ensure your satisfaction.
