AZZA CAST PC Case User Manual

1. Introduction

Welcome to the user manual for the AZZA CAST PC Case, Model CSAZ-808W-M. The AZZA CAST is an innovative ATX mid-tower chassis designed for enthusiasts seeking both high performance and unique aesthetics. Its distinctive gull-wing panels, detachable frame, and customizable exterior offer unparalleled flexibility for PC builders. This manual provides essential information for setting up, operating, and maintaining your AZZA CAST PC Case to ensure optimal performance and longevity.

Figure 1.1: Front view of the AZZA CAST PC Case in white.

2. Key Features

• Innovative Design: Features unique gull-wing panels and a separable frame/chassis, allowing for easier hardware installation and extensive exterior customization.
• Superb Craftsmanship: Constructed with premium aluminum gull wings supported by durable hinges and magnetic attachments. Includes both aluminum and mesh front panels for versatile aesthetics and airflow. The removable shell can be personalized with various color schemes or finishes.
• Detachable Interior: A sturdy, builder-friendly steel frame supports ATX, Micro-ATX, and Mini-ITX motherboards. Graphics cards up to 360mm can be mounted vertically (3 slots) or horizontally (6 slots). The case includes two 2.5" storage bays and one 2.5"/3.5" convertible tray.
• Efficient Cooling: An open chassis design promotes high-volume air cooling, particularly beneficial for the GPU. Active cooling clearances support a maximum CPU cooler height of 165mm and front radiator sizes of 280mm or 360mm with fan configurations of 3 x 120mm or 2 x 140mm. A 120mm Hurricane III ARGB rear fan is included.
• Smart & Convenient I/O: The front I/O panel provides a USB 3.1 Type-C port, audio-out, mic-in, two USB 3.0 Type-A ports, and a power button. Accessories such as cable management hook-and-loop fasteners, zip-ties, and a PSU cable shroud are included for a tidy build.

Figure 2.1: Internal view of the AZZA CAST PC Case with open panels, highlighting dimensions.

Figure 2.2: Front panel options (mesh and solid) and I/O port details.

3. Specifications

Figure 3.1: Internal layout showing fan and radiator mounting points.

4. Setup Guide

4.1. Preparation

• Unpack the AZZA CAST PC Case and all accessories.
• Ensure you have all necessary components: motherboard, CPU, GPU, RAM, PSU, storage drives, and any additional fans/radiators.
• Work on a clean, static-free surface. Consider using an anti-static wrist strap.

4.2. Detaching the Frame

The AZZA CAST features a detachable inner frame for easier component installation. Gently open the gull-wing panels and follow the instructions in your detailed assembly guide (not included in this general manual) to separate the inner frame from the outer shell. This provides ample access for installing components.

Figure 4.1: The detachable inner frame for simplified assembly.

4.3. Component Installation

1. Power Supply Unit (PSU): Install the PSU into its designated bottom-mount location. Secure it with screws.
2. Motherboard: Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs on the inner frame. Secure it with screws.
3. CPU Cooler: Install your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
4. Graphics Card (GPU): The case supports GPUs up to 360mm. You can install it horizontally in one of the 6 available slots or vertically using a riser cable (not included) in one of the 3 vertical slots. Ensure proper seating and secure with screws.
5. Storage Drives: Install 2.5" SSDs into the dedicated bays and 2.5"/3.5" HDDs/SSDs into the convertible tray.
6. Fans/Radiators: Install additional fans or radiators as needed. The front supports up to a 360mm radiator or 3 x 120mm/2 x 140mm fans. The rear has a pre-installed 120mm ARGB fan.

4.4. Cable Management

Utilize the provided cable management hook-and-loop fasteners and zip-ties to route cables neatly behind the motherboard tray and through designated cutouts. This improves airflow and aesthetics. The PSU cable shroud helps conceal excess cabling.

Figure 4.2: Example of a system build within the AZZA CAST case, showing component placement.

4.5. Reassembly

Once all components are installed and cables are managed, carefully slide the inner frame back into the outer shell. Ensure all connections are secure and the frame is properly seated. Close the gull-wing panels, which will magnetically secure to the frame.

5. Operating Instructions

5.1. Powering On

Connect your monitor, keyboard, mouse, and power cable to the appropriate ports. Press the power button on the front I/O panel to start your system.

5.2. Airflow Optimization

The AZZA CAST's open design naturally promotes good airflow. For optimal cooling, especially for high-performance components like the GPU, ensure that intake and exhaust fans are configured to create a consistent airflow path. The included 120mm ARGB rear fan acts as an exhaust. Consider adding front intake fans for best results.

5.3. Front I/O Port Usage

The front I/O panel provides convenient access to:

• USB 3.1 Type-C: For high-speed data transfer and device charging.
• USB 3.0 Type-A (x2): For standard USB devices.
• Audio Out & Mic In: For headphones, speakers, and microphones.

Figure 5.1: Detail of the front I/O panel.

6. Maintenance

6.1. Cleaning the Exterior

Wipe the aluminum panels with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish. For fingerprints, a microfiber cloth can be effective.

6.2. Dust Management

While the open design reduces dust accumulation in some areas, regular cleaning is recommended. Use compressed air to clear dust from fans, radiators, and internal components. Periodically check the mesh front panel for dust buildup and clean as necessary.

6.3. Component Checks

Periodically inspect all internal connections (power cables, data cables) to ensure they are securely seated. Check fan operation and listen for any unusual noises that might indicate a problem.

7. Troubleshooting

7.1. System Not Powering On

• Ensure the PSU is switched on and the power cable is securely connected to both the PSU and the wall outlet.
• Verify that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.
• Check all internal power connections (24-pin ATX, 8-pin CPU, PCIe power for GPU).

7.2. Fans Not Spinning / No RGB Lighting

• Confirm that fan power cables are properly connected to the motherboard or fan controller.
• For ARGB lighting, ensure the ARGB cable is connected to a compatible motherboard header or controller.
• Check fan settings in your motherboard's BIOS/UEFI or operating system software.

7.3. High Temperatures

• Ensure all fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Verify that the CPU cooler and GPU cooler are properly seated and making good contact.
• Clean any dust buildup from fans, radiators, and internal components.
• Consider adding more fans or upgrading to a more powerful cooling solution if temperatures remain high under load.

8. Warranty and Support

The AZZA CAST PC Case is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official AZZA website for detailed warranty terms and conditions. For technical support, product inquiries, or assistance with troubleshooting, please contact AZZA customer service through their official channels.

AZZA Official Website: www.azza.com