Thule 919505

Thule T2 Pro X Fat Tire Holder Instruction Manual

Model: 919505

1. Introduction

The Thule T2 Pro X Fat Tire Holder is an upgrade kit designed to enable your Thule T2 Pro X platform hitch rack to securely transport fat bikes. This kit replaces the standard wheel holders, providing an optimized fit for tires up to 5 inches wide. It utilizes your existing rack hardware for installation.

2. Safety Information

  • Always read and understand all instructions before installation and use.
  • Ensure all components are correctly installed and securely fastened according to the instructions.
  • Do not exceed the maximum weight capacity of your Thule T2 Pro X rack or your vehicle's hitch.
  • Regularly check the security of the fat tire holders and the bike during transit.
  • Be aware of the increased vehicle height and length when transporting bikes.
  • Keep hands and clothing clear of moving parts during installation and loading/unloading.

3. Package Contents

Verify that all components are present before beginning installation:

  • 2 x Thule T2 Pro X Fat Tire Holders (Front Wheel Holders)

Note: This kit uses existing hardware from your Thule T2 Pro X rack for installation.

4. Setup and Installation

This kit is designed to replace the standard wheel holders on your Thule T2 Pro X platform hitch rack. The installation process involves removing the existing wheel holders and attaching the new fat tire holders using the same hardware.

4.1. Tools Required

  • No additional tools are typically required beyond those used for initial rack assembly, as existing hardware is reused.

4.2. Installation Steps

  1. Prepare the Rack: Ensure your Thule T2 Pro X rack is securely mounted to your vehicle's hitch and is in a stable position.
  2. Remove Existing Holders: Locate the existing front wheel holders on your Thule T2 Pro X rack. Carefully unfasten the hardware (bolts, nuts, washers) that secures them to the rack arms. Retain all hardware.
  3. Position New Holders: Place one Thule T2 Pro X Fat Tire Holder onto the rack arm, aligning the mounting holes with those on the rack.
  4. Secure New Holders: Use the previously removed hardware to securely fasten the fat tire holder to the rack arm. Ensure all bolts are tightened firmly, but do not overtighten.
  5. Repeat for Second Holder: Follow steps 3 and 4 for the second fat tire holder on the other rack arm.
  6. Final Check: After installation, gently tug on each fat tire holder to ensure it is firmly attached and does not wobble.
Two Thule T2 Pro X Fat Tire Holders, black plastic components designed to secure fat bike tires.

This image displays the two specialized wheel holders included in the Thule T2 Pro X Fat Tire Holder kit. These holders are designed to accommodate wider fat bike tires, ensuring a secure fit on your Thule T2 Pro X platform hitch rack.

5. Operating Instructions

Once the fat tire holders are installed, using your Thule T2 Pro X rack for fat bikes is similar to using it for standard bikes, with the added benefit of enhanced tire accommodation.

5.1. Loading a Fat Bike

  1. Position the Rack: Ensure the rack is in the loading position (if applicable) and clear of any obstructions.
  2. Place the Bike: Lift your fat bike and place its wheels into the newly installed fat tire holders. The oversized design of these holders will cradle tires up to 5 inches wide.
  3. Secure the Front Wheel: Engage the front wheel arm of your Thule T2 Pro X rack over the front wheel, pushing it down firmly until it secures the tire.
  4. Secure the Rear Wheel: Use the rear wheel strap to firmly secure the rear wheel to its holder. Ensure the strap is tight and the wheel cannot move.
  5. Check Security: Before driving, gently shake the bike to confirm it is securely held by both the front arm and rear strap. There should be minimal movement.

5.2. Unloading a Fat Bike

  1. Release Rear Wheel: Unfasten the rear wheel strap.
  2. Release Front Wheel: Disengage the front wheel arm from the front tire.
  3. Remove Bike: Carefully lift the fat bike off the rack.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your Thule T2 Pro X Fat Tire Holders.

  • Cleaning: Clean the holders regularly with mild soap and water, especially after exposure to dirt, salt, or harsh weather conditions. Rinse thoroughly and dry.
  • Inspection: Periodically inspect the holders for any signs of wear, cracks, or damage. Check that all mounting hardware remains tight.
  • Storage: When not in use, store the rack and its accessories in a dry, protected area to prevent premature wear and environmental damage.

7. Troubleshooting

ProblemPossible CauseSolution
Fat tire holder feels loose after installation.Mounting hardware not sufficiently tightened.Re-tighten all mounting bolts and nuts. Ensure they are snug but do not overtighten.
Bike feels unstable on the rack.Front wheel arm or rear wheel strap not properly secured.Ensure the front wheel arm is fully engaged and the rear wheel strap is tightly fastened. Verify tire pressure is adequate.
Fat bike tire does not fit into the holder.Tire width exceeds 5-inch capacity.Confirm your fat bike tire width. These holders accommodate tires up to 5 inches. If wider, alternative solutions may be needed.

8. Specifications

  • Model Number: 919505
  • Brand: Thule
  • Material: Plastic
  • Color: Black
  • Item Dimensions (L x W x H): 3.94 x 3.94 x 5.91 inches (approximate for individual holder)
  • Item Weight: 0.5 Kilograms (for the kit)
  • Load Capacity: Designed to support fat bikes within the Thule T2 Pro X rack's overall capacity (typically 50 kg per bike tray).
  • Mounting Type: Hitch Mount (accessory for hitch-mounted rack)
  • UPC: 091021635814
  • Compatibility: Thule T2 Pro X platform hitch racks
  • Tire Compatibility: Accommodates fat bike tires up to 5 inches wide.

9. Warranty and Support

The Thule T2 Pro X Fat Tire Holder is covered by a Limited Lifetime Warranty from Thule. This warranty covers defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Thule website or contact Thule customer service.

For further assistance, technical support, or to inquire about replacement parts, please visit the official Thule website or contact their customer support department directly. You can find contact information and detailed FAQs on their website: www.thule.com

Related Documents - 919505

Preview Thule Verse 2-Bike Rack Installation Guide (903452, 903651)
Comprehensive installation and user manual for the Thule Verse 2-bike rack (model 903452) and its add-on (model 903651). Includes parts, assembly, safety, and compatibility information.
Preview Thule Verse 2-Bike Hitch Rack: Installation and User Manual
Comprehensive instructions for installing and using the Thule Verse 2-bike hitch rack (models 903452, 903453). Includes compatibility, load capacity, assembly, and usage guidelines.
Preview Thule Verse Bike Rack Installation and User Manual
Comprehensive instructions for installing and using the Thule Verse 2-Bike 2" and 2-Bike 1.25" bike racks. Includes safety information, load capacity details, and step-by-step assembly guides.
Preview Thule Epos 2-bike Hitch Rack - Installation and User Manual
Comprehensive instructions for installing and using the Thule Epos 2-bike hitch-mounted bike rack (Model 903210). Includes safety warnings, compatibility checks, and step-by-step guides.
Preview Thule Epos 3-bike with Lights (903311) - Installation and User Manual
Comprehensive instructions for installing and using the Thule Epos 3-bike with lights hitch-mounted bike rack, including safety warnings, specifications, and troubleshooting tips.
Preview MEEVIZ Platform Bike Rack Model 006 User Manual and Assembly Guide
Comprehensive guide for the MEEVIZ Platform Bike Rack Model 006, covering warnings, a detailed part list, step-by-step assembly instructions, and folding procedures for safe and efficient bike transport.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.