Product Overview
The Bracwiser MD7442 Dual Monitor Arm Stand Mount is designed to securely hold two computer monitors, freeing up valuable desk space and allowing for ergonomic adjustments. This mount supports monitors ranging from 13 to 27 inches, with a maximum weight capacity of 22 lbs (10 kg) per arm. It is compatible with VESA mounting patterns of 75x75mm and 100x100mm.
Image: The Bracwiser MD7442 Dual Monitor Arm supporting two monitors, highlighting its compatibility with 13-27 inch screens and a maximum load capacity of 22.2 lbs (10kg) per arm.
Safety Information
- Read all instructions carefully before installation. Incorrect assembly may cause damage or serious injury.
- Ensure the mounting surface (desk) can safely support the combined weight of the mount and your monitors.
- Do not exceed the maximum weight capacity of 22 lbs (10 kg) per arm.
- Use only the provided hardware. If any parts are missing or damaged, contact customer support.
- Keep children away from the product during installation. Small parts may be a choking hazard.
- Periodically check all screws and connections to ensure they remain tight and secure.
Package Contents
Verify that all components are present and undamaged before beginning installation.
Image: All components of the Bracwiser MD7442 Dual Monitor Arm, including the main pole, arms, VESA plates, C-clamp, grommet mount, and various screws and tools, alongside the user manual.
- 1 x Monitor Mount (main pole and arms)
- 1 x Mounting Hardware Kit (screws, washers, spacers)
- 1 x User Manual
- Tools (Allen wrenches)
Setup and Installation
The Bracwiser MD7442 offers two installation methods: C-clamp and Grommet mount. Choose the method best suited for your desk.
1. Choose Mounting Method
Image: Illustration of the two available mounting options: C-clamp for desks up to 100mm thick, and Grommet mount for desks with a minimum 42mm hole diameter.
2. Assemble the Mount
Attach the main pole to your chosen base (C-clamp or Grommet). Securely fasten all components using the provided tools. Ensure the pole is stable before proceeding.
Video: This video demonstrates the assembly process of the Bracwiser MD7442 Dual Monitor Arm, including attaching the base to the desk and securing the arms.
3. Attach VESA Plates to Monitors
Align the VESA plate with the mounting holes on the back of your monitor. Use the appropriate screws and spacers from the hardware kit to secure the plate. Do not overtighten.
4. Mount Monitors to Arms
Carefully slide the monitor (with attached VESA plate) onto the arm's VESA head. Ensure it clicks into place or is secured with the locking screw. Repeat for the second monitor.
Operating and Adjustments
The Bracwiser MD7442 offers extensive adjustability to achieve optimal viewing angles and ergonomic positioning.
Height Adjustment
The monitor arms can be adjusted vertically along the main pole. Loosen the collar on the main pole, slide the arms to the desired height (up to 406mm or 16 inches), and then tighten the collar securely. Note that both monitors adjust together vertically.
Image: The monitor arm's height adjustment mechanism, illustrating a vertical range of 16 inches (406mm).
Tilt, Swivel, and Rotation
Each monitor can be independently adjusted for tilt, swivel, and rotation:
- Tilt: Adjust the monitor screen up or down by +/-80 degrees to reduce glare and find a comfortable viewing angle.
- Swivel: Pivot the monitor left or right by +/-90 degrees.
- Rotation: Rotate the monitor 360 degrees to switch between landscape and portrait orientation.
Image: Demonstrates the monitor arm's flexibility, showing monitors in various orientations and angles, including 360° rotation, ±90° swivel, and ±80° tilt.
Arm Articulation
The arms feature multiple pivot points allowing for extension, retraction, and side-to-side movement to position your monitors precisely. The foldable arm design helps save space when not fully extended.
Image: An overhead view illustrating the 180-degree articulation at various joints of the monitor arms, allowing for flexible positioning.
Image: The monitor arm featuring a foldable design for space-saving and integrated cable management clips to keep cables tidy.
Video: This video showcases the various functional adjustments of the Bracwiser MD7442 Dual Monitor Arm, including swivel, tilt, rotation, and arm movement.
Maintenance
- Cleaning: Wipe the mount with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Tightening: Periodically check all screws and bolts, especially those connecting the arms to the pole and the VESA plates to the monitors. Tighten if necessary to maintain stability.
- Lubrication: No regular lubrication is required for the moving parts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor sags or tilts downwards | Tilt mechanism is loose or monitor is too heavy. | Tighten the tilt adjustment screw on the VESA head. Ensure monitor weight is within limits (22 lbs/10 kg per arm). |
| Mount feels unstable or wobbles | Base clamp/grommet is not tight enough or desk is unstable. | Retighten the C-clamp or grommet bolt. Ensure the desk surface is sturdy. |
| Difficulty adjusting arm movement | Joints are too tight. | Loosen the corresponding Allen screws at the arm joints slightly until desired movement is achieved. |
| Monitors are not level with each other | Monitors have different VESA hole placements or are not aligned on the arms. | Adjust the height of each VESA plate on the arm if possible, or manually adjust the monitor's position on the VESA plate before tightening. |
Specifications
- Model: MD7442
- Screen Size Compatibility: 13-27 inches
- Weight Capacity: 22 lbs (10 kg) per arm
- VESA Compatibility: 75x75mm, 100x100mm
- Tilt Angle: +/-80 degrees
- Swivel Angle: +/-90 degrees
- Rotation: 360 degrees
- Height Adjustment: Up to 406mm (16 inches)
- Mounting Type: C-clamp (desk thickness up to 100mm) or Grommet (desk hole diameter min 42mm)
- Material: Metal
- Color: Black
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Bracwiser store.
Official Bracwiser Store: Bracwiser Store on Amazon
