1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your PAWZ Road 5-Tier Floor to Ceiling Cat Tree. This cat tree is designed to provide a multi-level activity center for cats, featuring scratching posts, platforms, and a cozy bed.
The adjustable height feature allows it to fit various ceiling heights, providing a secure and engaging environment for your feline companions.
2. Safety Information
- Ensure all components are securely fastened during assembly. Loose parts can lead to instability.
- The cat tree is designed for kittens and small to medium-sized cats. Cats exceeding 20 lbs may exert excessive force on the top scratching post, potentially affecting stability.
- Always verify the tension rod is compressed sufficiently against the ceiling to ensure maximum stability.
- Utilize the provided wall-mounted anti-toppling fittings to secure the cat tree to a wall, especially in households with active cats or for added safety.
- Regularly inspect the cat tree for any signs of wear, damage, or loose connections. Address any issues promptly.
- Keep small children away from the cat tree during assembly and ensure they do not climb on it.
3. Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. Refer to the diagram for visual identification.
Figure 1: Exploded view of cat tree components with dimensions.
- Base Plate
- Multiple Platforms (5 levels)
- Thickened Posts (Sisal-covered and Plush-covered)
- Adjustable Tension Rod (Top component)
- Cozy Bed/Perch (Top platform)
- Dangling Ball Toy
- Wall-mounted anti-toppling fittings (Bracket, screw, wall anchor)
- Assembly Hardware (Screws, Allen wrench)
4. Setup and Assembly
Assembly typically takes 10 minutes or less. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
- Attach Base: Secure the lowest post to the base plate using the provided hardware.
- Assemble Posts and Platforms: Connect the posts and platforms in ascending order, ensuring each connection is tight. The platforms are push-covered and should align with the posts.
Figure 2: Detailed view of key components: sisal rope, carpeted platform, comfort mat, hanging ball, and wall mount.
- Install Top Perch and Tension Rod: Attach the cozy bed/perch to the top post. Then, install the adjustable tension rod at the very top.
Figure 3: Illustration of the adjustable height mechanism and overall dimensions.
- Adjust Height and Secure: Position the assembled cat tree in your desired location. Rotate the tension rod at the top to extend it until it firmly compresses against the ceiling. Ensure it is stable and does not wobble. The total height is adjustable from 95 to 107 inches (228-274 cm).
- Wall Mounting (Recommended): For enhanced stability, especially with active cats, use the provided wall-mounted anti-toppling fittings.
- Attach the bracket to one of the upper platforms using the small screw.
- Mark the corresponding spot on the wall.
- Drill a pilot hole, insert the wall anchor, and then secure the bracket to the wall with the larger screw.
Figure 4: Fully assembled PAWZ Road Cat Tree in a home setting.
5. Operating Instructions
The PAWZ Road Cat Tree provides multiple functions for your cat's enrichment:
- Climbing and Exploration: Cats can utilize the five levels to climb, explore, and observe their surroundings from elevated positions.
- Scratching: The sisal-covered posts are designed for cats to scratch, helping to maintain claw health and redirect scratching behavior away from furniture.
- Resting and Napping: The plush-covered platforms and cozy bed offer comfortable spots for cats to rest, perch, and nap.
- Play: The dangling ball toy provides an interactive element for play and hunting practice.
6. Maintenance
- Cleaning: Use a vacuum cleaner to remove loose fur and debris from the plush surfaces and platforms. Spot clean any soiled areas with a mild pet-safe cleaner and a damp cloth. Avoid saturating the material.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Inspect sisal ropes for excessive wear and tear.
- Stability Check: Regularly verify that the tension rod is still securely compressed against the ceiling. Re-adjust if necessary.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cat tree wobbles or is unstable. |
|
|
| Sisal rope is fraying excessively. | Normal wear and tear from scratching. | This is expected over time. The sisal is designed for scratching. If severely damaged, consider replacing the post or wrapping with new sisal rope. |
| Dangling toy is detached. | Aggressive play or manufacturing defect. | Reattach if possible. If broken, consider replacing with a new cat-safe toy. |
8. Specifications
- Model: M-3.5" Classic
- Brand: PAWZ Road
- Material: Engineered Wood, Natural Sisal, Plush Fabric
- Overall Dimensions (L x W x H): 44 x 25 x 228-274 cm (17.3 x 9.8 x 95-107 inches)
- Post Diameter: 9 cm (3.5 inches)
- Weight: 8.7 kg (19.18 lbs)
- Mounting Type: Floor Mount with adjustable tension rod, Wall Mount (optional)
- Recommended Breeds: Small to Medium Cats
9. Warranty and Support
For any questions regarding your PAWZ Road Cat Tree, including assembly assistance, missing parts, or product issues, please contact PAWZ Road customer support. Refer to your purchase documentation for specific warranty details and contact information.
A professional service team is available to assist with your concerns.
