Introduction
The mojawa Run SE (Mojo 1) Wireless Bone Conduction Headphones offer an open-ear listening experience, transmitting sound vibrations through the cheekbones directly to the cochlea. This design allows users to remain aware of their surroundings while enjoying audio. These headphones feature enhanced bass and sound quality, reduced sound leakage, and are built for durability with an IP67 waterproof rating and a comfortable, secure fit.
Setup
- Charging the Headphones:
Before first use, fully charge the headphones. Connect the magnetic charging cable to the charging port on the headphones and plug the USB end into a compatible power source. The LED indicator will show charging status. A full charge takes approximately 1.5 hours and provides up to 8 hours of music playback.
Image: The mojawa Run SE headphones are shown with the magnetic charging cable attached, illustrating the charging process.
- Powering On/Off:
Press and hold the power button for approximately 4 seconds until the LED indicator lights up (blue for power on, red for power off).
- Bluetooth Pairing:
When powered on for the first time or after a reset, the headphones will automatically enter pairing mode, indicated by alternating blue and red LED lights. On your device (smartphone, tablet, etc.), go to Bluetooth settings and select "mojawa Run SE" from the list of available devices. Once connected, the LED will show a solid blue light.
- Wearing the Headphones:
Place the headphones with the transducers resting on your cheekbones, just in front of your ears. The band should wrap around the back of your head. Adjust for a comfortable and secure fit.
Image: A person is shown wearing the mojawa Run SE headphones, highlighting their comfortable and non-shedding design, suitable for active use.
Operating Instructions
- Music Playback:
Use the multi-function button to play/pause music. Use the volume buttons (+/-) to adjust the volume or skip tracks (long press for next/previous track).
- Call Management:
Press the multi-function button to answer or end a call. Press and hold to reject a call. The integrated microphone ensures clear communication.
- Voice Assistant:
Activate your device's voice assistant by double-pressing the multi-function button.
- Sound Quality and Awareness:
The bone conduction technology allows you to hear your audio while remaining aware of ambient sounds, enhancing safety during outdoor activities. For a more focused listening experience, sponge earplugs are included.
Image: An illustration demonstrating the noise cancellation and reduced sound leakage features of the mojawa Run SE headphones.
Maintenance
- Cleaning:
The headphones are IP67 waterproof, making them resistant to rain, sweat, and dust. They can be easily cleaned with a quick rinse under water. Ensure the charging port is dry before recharging.
Image: A person is shown wearing the mojawa Run SE headphones in an outdoor setting, emphasizing their IP67 waterproof rating for active use.
- Storage:
Store the headphones in a cool, dry place. Use the included carry bag for protection when not in use.
- Battery Care:
To prolong battery life, avoid fully discharging the headphones frequently. Recharge them regularly, even if not used for extended periods.
Troubleshooting
- No Power:
Ensure the headphones are fully charged. Connect to the magnetic charging cable and check the LED indicator.
- Cannot Pair:
Make sure the headphones are in pairing mode (alternating blue/red LED). Turn off and on your device's Bluetooth. If issues persist, try resetting the headphones (refer to the full user manual for specific reset instructions).
- Low Volume/Poor Sound Quality:
Adjust the volume on both the headphones and your connected device. Ensure the transducers are positioned correctly on your cheekbones. If desired, use the included earplugs for a more immersive sound experience.
- Sound Leakage:
While designed to minimize sound leakage, ensure the volume is not excessively high, especially in quiet environments.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Run SE |
| Connectivity Technology | Wireless (Bluetooth 5.2) |
| Audio Driver Type | Bone Conduction Driver |
| Battery Life | Up to 8 Hours |
| Charging Time | Approximately 90 minutes |
| Water Resistance Level | IP67 Waterproof |
| Noise Control | Active Noise Cancellation |
| Material | Silicone, Titanium |
| Item Weight | 1.22 Ounces |
| Included Components | Carry Bag, Earplugs (1 Pair), Magnetic Charging Cable, User Manual |
Warranty
mojawa offers a 2-year warranty on all its products, including the Run SE (Mojo 1) Wireless Bone Conduction Headphones. Please retain your proof of purchase for warranty claims.
Support
For further assistance, troubleshooting, or to purchase replacement parts such as charging cables, please contact mojawa customer service. Refer to the official mojawa website or the contact information provided in the packaging for the most up-to-date support details.
