BRPOM BM600 Car Jump Starter and Air Compressor User Manual

1. Product Overview

The BRPOM BM600 is a versatile 4-in-1 device designed for automotive emergencies and daily convenience. It functions as a powerful car jump starter, a 150 PSI air compressor, a high-capacity power bank, and a bright LED flashlight. This manual provides detailed instructions for safe and effective use of your BM600.

Figure 1: BRPOM BM600 Car Jump Starter and Air Compressor with included accessories.

2. Package Contents

Please check the package contents upon unboxing to ensure all items are present:

• 1 x BRPOM BM600 Jump Starter and Air Compressor
• 1 x Smart Clamp (Jump Cables)
• 1 x DC Cigarette Lighter Adapter
• 1 x USB to Type-C Cable
• 4 x Valve Adapters (for various inflatables)
• 1 x User Manual

3. Key Features

3.1 Powerful Car Jump Starter

The BM600 features a maximum current of 3000A and a large capacity of 24,000mAh, capable of jump-starting 12V vehicles (all gasoline engines or up to 8L diesel engines) in seconds. A full charge can provide up to 50 jump starts. It is suitable for cars, trucks, motorcycles, snowmobiles, SUVs, lawnmowers, and boats. The device offers a long standby time of up to 12 months.

Figure 2: The BM600 can jump start flat batteries in seconds, supporting various vehicle types.

3.2 150 PSI Air Compressor

This integrated air compressor provides a maximum pressure of 150 PSI with preset functions and four unit values (PSI, BAR, KPA, KG/CM²). With its 24,000mAh battery, it can inflate 4 car tires from 0 to 35 PSI on a single full charge, or inflate from 25 to 36 PSI approximately 12 times. It is suitable for cars, bicycles, motorcycles, basketballs, and pool toys. Note: Not suitable for heavy truck tires or large inflatables like surfboards or inflatable boats.

Figure 3: The 150 PSI air compressor can quickly inflate tires and other items.

3.3 24,000mAh Power Bank

The BRPOM BM600 also functions as a powerful 24,000mAh power bank. It features two USB outputs (one of which is QC 3.0 for fast charging) and one DC output (12V-16V/10A). You can charge two devices simultaneously, such as mobile phones, computers, tablets, or e-readers. The DC output port can also power small appliances like car refrigerators or vacuum cleaners.

Figure 4: The BM600 can charge multiple electronic devices, offering 12-month standby and 18W USB-C fast recharge.

3.4 400 Lumens LED Flashlight

Equipped with a 400 lumens LED flashlight, the BM600 serves as a crucial emergency backup during camping, picnics, outdoor adventures, or roadside inspections. The digital LCD screen accurately displays the remaining power and output voltage.

4. Safety Information

Always read and understand all safety warnings and instructions before using the BRPOM BM600. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not expose the device to rain or wet conditions.
• Do not operate the device if it has been dropped or damaged.
• Keep out of reach of children.
• Ensure proper ventilation during use.
• Do not short-circuit the jump starter clamps.
• Do not attempt to jump start a frozen battery.
• Always connect the smart clamp correctly (red to positive, black to negative).
• Warning: The BM600 is not suitable for heavy truck tires or large inflatable items such as surfboards or inflatable boats.

The BM600 incorporates multiple safety protections:

• Low Voltage Protection
• Reverse Connection Protection
• Reverse Charge Protection
• Short Circuit Protection
• Over Temperature Protection
• Over Current Protection
• Over Charge Protection
• Reverse Polarity Protection

Figure 5: The BM600 is designed with multiple safety protections for powerful and secure operation.

Figure 6: The BM600 features a large area heat dissipation hole and smart temperature control system for optimal performance.

5. Setup

5.1 Initial Charging

Before first use, fully charge the BRPOM BM600. Connect the USB to Type-C cable to the device's USB-C input port and a suitable USB wall adapter (not included). The LCD screen will indicate the charging status. A full charge from half capacity typically takes a couple of hours.

5.2 Checking Battery Level

The digital LCD screen displays the remaining power. It is recommended to check the charge level before each use, especially for jump-starting, to ensure optimal performance.

6. Operating Instructions

6.1 Using the Jump Starter

1. Ensure the BM600 is sufficiently charged (at least 50%).
2. Connect the smart clamp cable to the jump start port on the BM600.
3. Connect the RED clamp to the vehicle's positive (+) battery terminal.
4. Connect the BLACK clamp to the vehicle's negative (-) battery terminal.
5. Ensure the connections are secure. The smart clamp will indicate readiness.
6. Start your vehicle's engine.
7. Once the engine starts, immediately disconnect the smart clamp from the BM600, then disconnect the clamps from the car battery (black first, then red).

If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again.

6.2 Using the Air Compressor

1. Connect the air hose to the air compressor port on the BM600.
2. Attach the appropriate valve adapter to the item you wish to inflate (e.g., tire valve).
3. Turn on the air compressor function.
4. Use the digital display to set the desired pressure (PSI, BAR, KPA, KG/CM²).
5. Start inflation. The compressor will automatically stop once the preset pressure is reached.
6. Disconnect the hose and valve adapter.

6.3 Using the Power Bank

1. Connect your electronic device's charging cable to one of the USB output ports (USB-A or QC 3.0 USB-A) or the DC output port on the BM600.
2. The BM600 will automatically begin charging your device.
3. Monitor the device's charging status and the BM600's battery level on the LCD screen.

6.4 Using the LED Flashlight

Press the flashlight button to cycle through different modes: constant light, strobe, and SOS signal. Press again to turn off.

7. Maintenance

7.1 Recharging

To maintain battery health, recharge the BM600 after each use, especially after jump-starting or extensive air compressor use. For long-term storage, recharge the device every 3-6 months to prevent deep discharge and prolong battery life.

7.2 Storage

Store the device in a cool, dry place, away from direct sunlight, heat sources, and moisture. Keep it in its original carrying case to protect it from dust and physical damage.

7.3 Cleaning

Wipe the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.

8. Troubleshooting

9. Specifications

10. Warranty and Support

BRPOM offers a 2-year free return and exchange policy for the BM600. For any product issues or inquiries, please contact our customer service team. We provide 24/7 five-star service to assist you.

Please refer to the contact information provided with your purchase or on the official BRPOM website for direct support.