Stauer Speedway Men's Automatic Watch Instruction Manual

1. Introduction

Thank you for choosing the Stauer Speedway Men's Automatic Watch. This timepiece combines classic design with the precision of a 27-jewel automatic movement. This manual provides essential information for setting up, operating, and maintaining your watch to ensure its longevity and accurate performance.

The Stauer Speedway watch features a 43mm rose gold-finished stainless steel case, a mother-of-pearl dial, and a brown leather strap. Key functions include time display, month, day of the week, 24-hour time, and a moon phase indicator.

Image 1: Front view of the Stauer Speedway Automatic Watch, showcasing the rose gold case, mother-of-pearl dial, and multiple subdials.

2. Watch Components

Familiarize yourself with the main components of your Stauer Speedway watch:

• Crown: Used for winding the watch and setting the time.
• Pushers: Small buttons on the side of the case, typically used to adjust date, day, month, or moon phase.
• Hour, Minute, Second Hands: Indicate the current time.
• Subdials: Display month, day of the week, and 24-hour time.
• Moon Phase Display: Shows the current phase of the moon.
• Date Window: Displays the current date.
• Tachymeter Bezel: The outer ring with markings, used for measuring speed over a known distance.
• Leather Strap: Secures the watch to your wrist.

Image 2: Annotated diagram highlighting key features such as the rose gold finished stainless steel case, crown, mother-of-pearl dial, and Cotswold Crystal.

3. Setup and Initial Operation

3.1. Initial Winding

Your Stauer Speedway watch is powered by an automatic movement, meaning it winds itself with the motion of your wrist. If the watch has stopped or is running low on power, it may need to be manually wound:

1. Ensure the crown is in its normal, pushed-in position.
2. Rotate the crown clockwise approximately 20-30 times. This will provide enough power reserve to start the watch and allow the automatic winding mechanism to take over with wear.

3.2. Setting the Time

To set the time on your watch:

1. Gently pull the crown out to its outermost position (typically the second click). The second hand may stop, allowing for precise time setting.
2. Rotate the crown to move the hour and minute hands clockwise or counter-clockwise until the desired time is displayed. Pay attention to the 24-hour subdial to ensure the correct AM/PM is set, especially when setting the date.
3. Once the time is set, push the crown back into its normal, pushed-in position. The second hand will resume movement.

3.3. Setting Date, Day, Month, and Moon Phase

The Stauer Speedway watch features multiple complications. These are typically adjusted using the crown in its first pulled-out position or via small pushers on the side of the case. Refer to the specific markings on your watch for pusher functions:

• Date: Often adjusted by rotating the crown in the first pulled-out position (one click out) or by pressing a dedicated pusher.
• Day of the Week: Usually adjusted by pressing a specific pusher.
• Month: Typically adjusted by pressing a specific pusher.
• Moon Phase: Adjusted by pressing a dedicated pusher until the correct moon phase is displayed.

Important: Avoid adjusting the date, day, or month between 9 PM and 3 AM, as this is when the watch's internal mechanisms are engaged in changing the date, and manual adjustment can cause damage.

3.4. Visual Guide for Time Setting

The following video demonstrates the general process of setting the time on a Stauer automatic watch. While the model shown may differ, the crown operation for time setting is similar.

4. Operating the Features

4.1. Subdials

Your Speedway watch includes three functional subdials:

• Month Subdial: Indicates the current month.
• Day of the Week Subdial: Shows the current day (e.g., MON, TUE).
• 24-Hour Time Subdial: Provides a 24-hour indication, useful for distinguishing AM/PM and tracking a second time zone if desired.

4.2. Moon Phase Display

The moon phase display visually tracks the lunar cycle, showing new moon, first quarter, full moon, and last quarter. This feature advances automatically once set correctly.

4.3. Tachymeter Bezel

The outer bezel of your watch features a tachymeter scale. This scale can be used in conjunction with the second hand to measure speed over a known distance (e.g., 1 mile or 1 kilometer). To use it, start the second hand at the beginning of the measured distance and stop it at the end. The number on the tachymeter scale corresponding to where the second hand points indicates the speed in units per hour.

5. Maintenance and Care

Proper care will help preserve the appearance and function of your Stauer Speedway watch:

• Cleaning: Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, use a slightly damp cloth and allow it to air dry. Avoid harsh chemicals.
• Water Resistance: Your watch is water-resistant up to 3 ATM (30 meters). This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Avoid operating the crown or pushers when the watch is wet.
• Temperature: Avoid exposing your watch to extreme temperatures (hot or cold) or sudden temperature changes.
• Magnetic Fields: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices), as these can affect the accuracy of the automatic movement.
• Storage: When not wearing your watch, store it in a cool, dry place, preferably in its original box or a watch winder to maintain its power reserve.

Image 3: Rear view of the Stauer Speedway Automatic Watch, displaying the exhibition caseback that reveals the automatic movement.

6. Troubleshooting

If you encounter issues with your Stauer Speedway watch, consider the following common solutions:

• Watch Not Running: As an automatic watch, it requires motion to wind. If it has been stationary for an extended period, manually wind it using the crown (refer to Section 3.1).
• Incorrect Time: Ensure the crown is fully pushed in after setting the time. If the time is consistently fast or slow, the watch may require regulation by a professional watchmaker.
• Date/Day/Month Not Changing: Verify that the time is set correctly for AM/PM. If the watch is set to PM when it should be AM, the date change will occur at noon instead of midnight. Avoid manual adjustment during the 9 PM - 3 AM period.
• Water Intrusion: If moisture appears inside the watch, immediately take it to a qualified watch repair professional. Do not attempt to open the watch yourself.

Image 4: Detailed view of the watch's exhibition back, highlighting the 27-jewel automatic movement and the embossed brown leather band.

7. Specifications

8. Warranty and Support

For warranty information, service, or additional support regarding your Stauer Speedway Automatic Watch, please refer to the documentation included with your purchase or contact Stauer customer service directly.

You may also reach Stauer customer service via:

• Toll Free: 888-333-2012
• Email: customerservice@stauer.com
• Website: www.stauer.com