Shanrya Shanryamt8g75kips123-11

Shanrya USB3.0 2.5-inch SATA Portable Hard Disk Enclosure

Model: Shanryamt8g75kips123-11

Introduction

The Shanrya USB3.0 2.5-inch SATA Portable Hard Disk Enclosure provides a convenient solution for converting a 2.5-inch SATA hard disk drive (HDD) or solid-state drive (SSD) into an external, portable storage device. This enclosure supports capacities up to 8TB and offers high-speed USB 3.0 connectivity for efficient data transfer. Its plug-and-play design ensures ease of use across various Windows operating systems.

Shanrya USB3.0 2.5-inch SATA Portable Hard Disk Enclosure with text indicating USB3.0 and OS support

Image: The Shanrya USB3.0 2.5-inch SATA Portable Hard Disk Enclosure, highlighting its USB 3.0 capability and compatibility with Windows 98SE / ME / 2000 / XP / 7 / 8 / 10 and higher operating systems.

Package Contents

Please verify that all items listed below are present in your package:

  • 1 x Hard Disk Box (Enclosure)
  • 1 x Data Cable (USB 3.0)

Setup Instructions

Follow these steps to install your 2.5-inch SATA HDD or SSD into the enclosure:

  1. Open the Enclosure: Gently slide the back cover of the hard disk box to open it. The design features buckle mechanisms for secure closure.
  2. Insert Hard Disk: Carefully align your 2.5-inch SATA HDD or SSD with the SATA connector inside the enclosure. Push the drive firmly but gently until it is fully seated in the connector.
  3. Close the Enclosure: Slide the back cover back into place until it clicks securely, ensuring the drive is fully enclosed and protected.
Disassembled Shanrya hard disk enclosure showing the internal tray and back cover

Image: The hard disk enclosure disassembled, illustrating the internal tray where the 2.5-inch SATA drive is inserted and the removable back cover.

Operating Instructions

The Shanrya hard disk enclosure is designed for plug-and-play operation. No additional drivers are required for most supported operating systems.

  1. Connect to Computer: Use the provided USB 3.0 data cable to connect the enclosure to an available USB port on your computer. For optimal performance, connect to a USB 3.0 port.
  2. System Recognition: Your operating system (Windows 98SE / ME / 2000 / XP / 7 / 8 / 10 or higher) should automatically detect the new hardware. The drive will appear as an external storage device.
  3. Accessing Data: You can now access, transfer, and store data on the installed hard disk drive or solid-state drive as you would with any other external storage device.
Shanrya hard disk enclosure connected to a laptop via USB cable, with 'Plug and play' text

Image: The Shanrya hard disk enclosure connected to a laptop, demonstrating its plug-and-play functionality for immediate use.

Maintenance

To ensure the longevity and optimal performance of your hard disk enclosure, consider the following maintenance guidelines:

  • Keep Clean: Regularly wipe the exterior of the enclosure with a soft, dry cloth to remove dust and fingerprints. Avoid using liquid cleaners.
  • Protect from Elements: Keep the enclosure away from water, excessive humidity, and extreme temperatures.
  • Handle with Care: Avoid dropping or subjecting the enclosure to strong impacts, as this can damage the internal drive or the enclosure itself.
  • Proper Disconnection: Always safely eject the device from your operating system before physically disconnecting the USB cable to prevent data corruption.

Troubleshooting

If you encounter issues with your hard disk enclosure, refer to the following common problems and solutions:

  • Enclosure Not Recognized:
    • Ensure the USB cable is securely connected to both the enclosure and the computer.
    • Try connecting to a different USB port on your computer.
    • Test the enclosure with a different USB cable if available.
    • Verify that the internal 2.5-inch SATA drive is correctly seated within the enclosure.
    • Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but unformatted or uninitialized.
  • Slow Data Transfer Speed:
    • Ensure you are connected to a USB 3.0 port on your computer. USB 2.0 ports will result in significantly slower speeds.
    • The speed of data transfer is also dependent on the speed of the installed HDD/SSD.
    • Avoid transferring many small files simultaneously, as this can reduce overall transfer rates.
  • Enclosure Disconnects Randomly:
    • Ensure the USB cable is not loose.
    • Check for power saving settings on your computer that might be turning off USB ports.
    • Test with a different USB port or cable.

Specifications

BrandShanrya
Model NumberShanryamt8g75kips123-11
Compatible DevicesLaptop
Hard Disk Form Factor2.5 Inches
Max Supported Capacity8 TB
Data Transfer Rate5 Gigabits Per Second (USB 3.0)
Connectivity TechnologySATA, USB
Hardware InterfaceUSB 3.0
Operating System SupportWindows 98SE / ME / 2000 / XP / 7 / 8 / 10 or higher
MaterialAluminum
ColorBlue
Item Weight5 ounces
Package Dimensions5.98 x 3.98 x 1.46 inches

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Shanrya customer service directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.