Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Aiho Full Bed Frame. Please read carefully before beginning assembly to ensure proper setup and safe use.
Safety Information
- Keep all parts and packaging materials away from children.
- Ensure all screws and bolts are tightened securely before using the bed frame.
- Do not stand or jump on the bed frame.
- Use only the provided hardware for assembly. Substituting parts may compromise the frame's integrity.
- Periodically check all connections (every 3-6 months) to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
Package Contents
Verify all components are present before assembly. Refer to the parts list in your included hardware packet for specific item identification.
Image description: An overhead view of all bed frame components laid out, including the headboard, side rails, footboard, support legs, and wooden slats.
Assembly Instructions
Estimated Assembly Time: Approximately 30-60 minutes. Tools Required: Allen wrench (provided).
It is recommended to assemble the bed frame with two people for ease and safety.
Step 1: Assemble the Headboard
Attach the side wings to the main headboard panel using the provided screws (M) and bolts (Q). Ensure a secure connection.
Image description: Close-up of a hand attaching a metal bracket to the headboard wing using a screw and Allen wrench.
Step 2: Prepare Side Rails
Loosen the pre-locked screws on items C1, C2, D1, D2, and B before proceeding with assembly. These screws will be tightened later during the final steps.
Image description: A hand using an Allen wrench to loosen a pre-locked screw on a side rail component.
Step 3: Attach Footboard Legs
Secure the footboard legs (L) to the footboard (B) using the long screws (R).
Image description: A person attaching a black leg to the footboard using a long screw and an Allen wrench.
Step 4: Connect Side Rails to Footboard
Connect the side rails (C1, C2, D1, D2) to the footboard (B). Ensure the brackets align and secure them with the appropriate screws.
Image description: A close-up of the metal brackets connecting a side rail to the footboard, with screws being tightened.
Step 5: Assemble Center Support Bars
Assemble the center support bars (G, H, I) and attach the support legs (K) using screws (P).
Image description: A person assembling the metal center support bars and attaching a support leg with a screw.
Step 6: Attach Center Support to Frame
Place the assembled center support structure into the bed frame. Secure it to the side rails using screws (P) and (N).
Image description: A person securing the center support bar to the bed frame side rail with a screw.
Step 7: Install Slats
Place the wooden slats (E1, E2) onto the bed frame. Secure them to the frame using the provided screws (N&S). Ensure even spacing for optimal mattress support.
Image description: A person placing wooden slats onto the bed frame and securing them with screws.
Assembly Video
This video provides a visual guide for assembling the Aiho Full Bed Frame. It demonstrates each step from unboxing to final slat installation.
Operating Instructions
This bed frame is designed to support a full-size mattress without the need for a box spring. Simply place your mattress directly onto the wooden slats.
The sturdy wood slats and metal frame provide reliable support for your mattress, ensuring a quiet sleeping experience.
Image description: An assembled Aiho Full Bed Frame with a mattress and bedding, showcasing its design.
Maintenance
- Cleaning: For the upholstered fabric, dry clean only. For metal parts, wipe with a damp cloth and dry immediately.
- Regular Checks: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Weight Capacity: The bed frame has a load-bearing capacity of 400kg (881.84 lbs). Do not exceed this weight limit.
Image description: A family on the bed, illustrating the bed's load-bearing capacity of 400kg/881.84 lbs.
Troubleshooting
- Squeaking Noises: If the bed frame makes noise, check all connections and tighten any loose screws or bolts. Ensure slats are properly seated and secured.
- Instability: If the frame feels unstable, re-check all assembly steps, especially the corner brackets and center support legs, to ensure they are correctly installed and tightened.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 77.75"L x 56.88"W x 43.7"H |
| Style | Platform |
| Special Feature | Sturdy |
| Finish Type | Steel |
| Included Components | Headboard, Slats |
| Brand | Aiho |
| Product Care Instructions | Dry Clean Only |
| Assembly Required | Yes |
| Item Weight | 63.9 pounds |
| Item Model Number | AF10 |
| UPC | 735940734516 |
| Load-bearing Capacity | 400kg / 881.84 lbs |
Image description: A diagram illustrating the dimensions of the Aiho Full Bed Frame: 77.75 inches long, 56.88 inches wide, and 43.7 inches high.
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official Aiho website. Keep your proof of purchase for any warranty claims.