Introduction
The Line 6 LFS2 is a durable, two-button metal latching footswitch designed for remote control of your Line 6 Catalyst Amplifier. It allows you to switch between channels and control effect on/off status. The functionality of the Effect switch can be customized using the Catalyst Edit app. A ten-foot right-angle/straight TRS cable is included for immediate use.
This manual provides essential information for setting up, operating, and maintaining your LFS2 footswitch.
Key Features:
- 2-Button metal-latching footswitch for the Line 6 Catalyst Amplifier.
- Provides remote control of Channel and Effect on/off status.
- Effect switch functionality is reassignable via the Catalyst Edit app.
- Includes a ten-foot right-angle/straight TRS cable.
Package Contents
Verify that all items are present in the package:
- Line 6 LFS2 Footswitch
- 10-foot Right-Angle/Straight TRS Cable
Setup
Follow these steps to connect your LFS2 Footswitch to your Line 6 Catalyst Amplifier:
- Locate the Footswitch Input: On your Line 6 Catalyst Amplifier, find the dedicated footswitch input jack. This is typically a TRS (Tip-Ring-Sleeve) jack.
- Connect the Cable: Take the included 10-foot TRS cable. Insert one end (either the right-angle or straight connector) into the footswitch input jack on your amplifier.
- Connect to Footswitch: Insert the other end of the TRS cable into the input jack located on the rear of the LFS2 Footswitch. Ensure a secure connection.
- Power On: Once connected, power on your Line 6 Catalyst Amplifier. The LFS2 Footswitch does not require a separate power supply as it draws power from the amplifier via the TRS cable.
Operating Instructions
The LFS2 Footswitch provides intuitive control over your Line 6 Catalyst Amplifier.
Channel Control:
Press the footswitch labeled "CHANNEL" to cycle through the available channels on your Line 6 Catalyst Amplifier. An indicator light next to the button will typically change color or state to reflect the active channel.
Effect Control:
Press the footswitch labeled "EFFECT" to toggle the assigned effect on or off. The indicator light will show the status of the effect.
Customizing the Effect Switch: The functionality of the "EFFECT" switch can be reassigned to control different parameters or effects within your Catalyst Amplifier. This customization is performed using the Line 6 Catalyst Edit app. Refer to your Catalyst Amplifier's manual or the Catalyst Edit app documentation for detailed instructions on reassigning footswitch functions.
Maintenance
The Line 6 LFS2 Footswitch is designed for durability with its metal construction. To ensure its longevity and optimal performance, follow these simple maintenance guidelines:
- Cleaning: Wipe the footswitch with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, which can damage the finish.
- Storage: Store the footswitch in a dry environment, away from extreme temperatures and humidity.
- Cable Care: Avoid kinking or sharply bending the included TRS cable. Store it neatly coiled to prevent damage to the internal wiring.
- Inspection: Periodically check the cable connections and the footswitch buttons for any signs of wear or damage.
Troubleshooting
If you encounter issues with your LFS2 Footswitch, try the following troubleshooting steps:
- Footswitch Not Responding:
- Ensure the TRS cable is securely connected to both the footswitch and the amplifier.
- Verify that your Line 6 Catalyst Amplifier is powered on.
- Test with a different TRS cable if available, to rule out a faulty cable.
- Check the amplifier's settings to ensure the footswitch input is enabled and configured correctly.
- Effect Switch Not Changing Function:
- Confirm that you are using the Line 6 Catalyst Edit app to reassign the effect switch.
- Ensure the app is properly connected to your amplifier and the changes are saved.
- Indicator Lights Not Working:
- The footswitch draws power from the amplifier. If lights are off, check the amplifier's power and cable connection.
If problems persist after attempting these steps, contact Line 6 customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Line 6 |
| Model | LFS2 |
| Controller Type | Footswitch |
| Number of Positions | 2 |
| Switch Type | Latching Push-down |
| Actuator Type | Mechanical Latching Footswitch |
| Control Type | Channel and Effect on/off |
| Compatible Devices | Line 6 Catalyst Amplifier |
| Material | Metal (Contact Material: Nickel or Stainless Steel) |
| Color | Black |
| Item Dimensions (L x W x H) | 7.44 x 5.59 x 2.64 inches |
| Item Weight | 0.01 Ounces |
| Included Components | 10-foot TRS Cable |
| Connectivity Protocol | X-10 (Note: This might be a generic spec, actual connection is TRS cable) |
| UPC | 614252326513 |
| ASIN | B09NB1SM3W |
Warranty and Support
Warranty Information:
The Line 6 LFS2 Footswitch comes with a 1-year manufacturer warranty. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical support, service, or additional product information, please visit the official Line 6 website or contact their customer service department. You can also find more information and resources on the Line 6 Store on Amazon.