Product Overview
The Eden Turbo Oscillating Sprinkler is designed to keep your lawn and gardens vibrant and healthy. Featuring 16 clog-resistant precision nozzles and a turbo drive motor, it delivers consistent watering. The sprinkler offers adjustable coverage up to 3,600 sq. ft. (335m²) and includes a weighted base for stability. A built-in cleaning tool and Quick Connect Starter Set enhance usability and maintenance.
Setup Instructions
Follow these steps to set up your oscillating sprinkler:
- Positioning: Place the sprinkler on a flat, stable surface in the center of the area you wish to water. The heavy-weight base ensures stability during operation.
- Hose Connection: Connect your standard U.S. garden hose to the sprinkler's inlet. The included Quick Connect Starter Set allows for easy attachment and detachment. Simply screw the Quick Connect adapter onto your hose, and the corresponding piece onto the sprinkler. The secure twist-and-lock mechanism prevents accidental disconnection.
- Water Supply: Slowly turn on the water supply to the hose.


Operating Instructions
The Eden Oscillating Sprinkler features intuitive controls for precise watering:
- Adjusting Watering Area: Use the sliding tab range controls located on the side of the sprinkler to easily adjust the length of the watering area. Slide the tabs inward to reduce the coverage area or outward for maximum coverage. This allows for precise watering, from a large lawn to a smaller garden bed.
- Consistent Coverage: The 16 precision nozzles and patented sealed turbo drive motor ensure smooth operation and consistent water distribution across the selected area, even with varying water pressure.

Maintenance
Regular maintenance ensures optimal performance and longevity of your sprinkler:
- Nozzle Cleaning: The sprinkler includes a built-in cleaning tool. If any nozzles become clogged, use this tool to clear them. Simply insert the pin into the clogged nozzle and gently push to dislodge debris.
- Filter Washers: The Quick Connect Starter Set includes two stainless steel filter washers. Periodically check these washers for debris and clean them to maintain a leak-free seal and prevent clogs in the sprinkler.

Troubleshooting
If you encounter issues with your sprinkler, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaking at hose connection | Loose connection, worn washer, or missing washer. | Ensure hose is tightly connected. Check and replace rubber washer if worn or missing. Use provided stainless steel filter washers. |
| Uneven or weak spray pattern | Clogged nozzles, low water pressure. | Use the built-in cleaning tool to clear clogged nozzles. Ensure adequate water pressure from your spigot. |
| Sprinkler not oscillating | Debris in the turbo drive motor, insufficient water pressure. | Flush the sprinkler with high pressure water to clear internal debris. Ensure sufficient water pressure. |
Specifications
- Brand: Eden
- Model Number: 96213
- Material: Plastic
- Style: 16 Nozzles with Range Control
- Coverage Area: Up to 3,600 sq. ft. (tested at 40 P.S.I Dynamic)
- Item Dimensions (L x W x H): 5.11 x 15.74 x 2.36 inches
- Item Weight: 1.3 pounds
- Maximum Pressure: 40 Pound per Square Inch
- Maximum Flow Rate: 30 Gallons Per Minute
- UPC: 737677962132
- Country of Origin: Taiwan
Warranty & Support
The Eden 96213 Oscillating Sprinkler comes with a Limited 2-Year Eden Warranty. For detailed warranty information or further assistance, please refer to the official user manual.
You can download the full user manual in PDF format here: Eden 96213 User Manual (PDF)
