Reliable 140IS MAVEN 1500W Ironing Station User Manual

1. Important Safety Information

Please read all instructions carefully before using the Reliable 140IS MAVEN Ironing Station. Retain this manual for future reference.

• Always unplug the appliance from the electrical outlet when filling with water, emptying, or when not in use.
• Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been dropped or damaged in any manner.
• To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
• Close supervision is necessary for any appliance used by or near children. Do not leave the iron unattended while connected or on an ironing board.
• Use the appliance only for its intended household use as described in this manual.
• The iron must be used and rested on a stable surface.
• The filling opening must not be opened during use.

2. Product Overview

The Reliable 140IS MAVEN Ironing Station is designed for efficient garment care, featuring a ceramic soleplate and a large water tank for extended use.

Key Features:

• Ceramic Soleplate: Provides even heat distribution and maximum steam penetration.
• Pro Detail Tip: Designed for reaching small, difficult areas like between buttons.
• Iron Lock: Secures the iron to its base for safe transport.
• Auto Shut-off: Automatically turns off after 10 minutes of inactivity for safety.
• 1.5L Removable Water Tank: Allows for longer steaming sessions and can be refilled during use.
• Digital Display: For easy temperature and steam setting adjustments.

3. Setup Instructions

1. Unpacking: Carefully remove all components from the packaging. Ensure all parts listed in the 'What's in the Box' section are present.
2. Soak Anti-Scale Cartridge: Before first use, locate the anti-scale cartridge (filter) within the unit. Submerge the cartridge in water for at least 5 minutes. This step is crucial for proper steam generation and to prolong the life of your ironing station.

   

3. Fill Water Tank: Remove the 1.5L water tank from the base. Fill it with clean tap water up to the 'MAX' line. Distilled water is recommended to minimize mineral buildup. Reinsert the water tank securely into the base.
4. Placement: Place the ironing station on a stable, heat-resistant surface. Ensure the power cord and steam hose are not obstructed.
5. Connect Power: Plug the power cord into a suitable electrical outlet.

4. Operating Instructions

1. Power On: Press the power button on the digital display. The unit will begin to heat up.
2. Select Temperature: Use the digital display to select the appropriate temperature setting for your fabric. The 140IS MAVEN has 4 temperature settings:
   • Eco Mode: Safe for all fabrics.
   • Dot 1: Lowest setting, no steam.
   • Dot 2: Medium/Low setting, low steam.
   • Dot 3: Medium heat, medium steam.
   • Dot 4: Maximum heat and steam.

   Always refer to garment labels for ironing instructions. The iron heats up quickly.

3. Generate Steam: To produce steam, press and hold the steam trigger located on the underside of the iron handle. The unit does not produce continuous steam without holding the button.
4. Iron Lock Feature: When transporting the ironing station, engage the iron lock to secure the iron to its base, preventing accidental movement.
5. Pro Detail Tip: Utilize the pointed tip of the soleplate to iron around buttons, collars, and other intricate areas.
6. Auto Shut-off: For safety, the ironing station is equipped with a 10-minute auto-off feature. If the iron is inactive for 10 minutes, it will power down. To re-engage, simply move the iron or press any button on the display.

5. Maintenance

Water Tank Refilling:

The 1.5L water tank can be refilled at any time, even during ironing, without needing to power down the unit. Simply remove the tank, fill with water, and reinsert.

Anti-Scale Cartridge:

The anti-scale cartridge helps prevent mineral buildup. Ensure it is properly soaked before initial use. While the manual does not specify a replacement schedule, regular inspection for mineral buildup is recommended. Replace if significant calcification is observed.

Cleaning the Soleplate:

Allow the iron to cool completely. Wipe the ceramic soleplate with a damp cloth. Do not use abrasive cleaners or metallic scouring pads, as these can damage the soleplate.

Exterior Cleaning:

Wipe the exterior of the ironing station with a soft, damp cloth. Do not use harsh chemicals.

6. Troubleshooting

If you encounter issues with your ironing station, refer to the following common problems and solutions:

• No Steam Production:
  • Ensure the anti-scale cartridge was soaked for 5 minutes before first use.
  • Check if the water tank is sufficiently filled.
  • Confirm that the steam trigger on the iron handle is being pressed and held.
  • Verify the temperature setting is appropriate for steam generation (Dot 2, Dot 3, or Dot 4).
• Chugging Noise:
  • A small chugging noise is normal during operation as the pump delivers steam.
  • If the noise increases, check the water level in the tank; it may be running low.
  • Ensure the anti-scale cartridge was properly soaked.
• Iron Shuts Off Unexpectedly:
  • The unit has a 10-minute auto shut-off safety feature.
  • To re-engage, move the iron or press any button on the digital display.
• Difficulty with Temperature Settings:
  • The touch controls may require multiple attempts to select the desired temperature. Ensure your finger makes firm contact.

7. Specifications

8. Warranty and Support

Warranty Information:

This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Reliable website.

Customer Support:

For any questions, technical assistance, or support regarding your Reliable 140IS MAVEN Ironing Station, please visit the official Reliable website and submit a ticket through their help center. You can find their official website by searching for 'Reliable Corporation'.