AmmToo Starfish Ocean Projection Lamp (Model ZN01) User Manual

1. Introduction

The AmmToo Starfish Ocean Projection Lamp is designed to create a soothing and romantic ambiance with dynamic water ripple light effects. This device features 7 color changes, stepless dimming, and a high-capacity rechargeable battery for versatile use in various settings.

2. Safety Information

• Keep the device away from water and moisture.
• Do not disassemble or attempt to repair the device yourself.
• Use only the specified charging cable and power adapter.
• Avoid direct eye exposure to the light source.
• Keep out of reach of small children.

3. Package Contents

Verify that all items are present in your package:

• 1 x Starfish Ocean Projection Lamp
• 1 x Type-C Charging Cable
• 1 x User Manual

4. Product Overview

The AmmToo Starfish Ocean Projection Lamp projects dynamic water ripple patterns onto surfaces, creating a calming atmosphere. It features a unique starfish design and offers multiple lighting options.

Image 1: The AmmToo Starfish Ocean Projection Lamp projecting light in a room.

Image 2: The lamp creating an ocean-like ambiance.

5. Setup

5.1 Charging the Device

The lamp is equipped with a 2000mAh high-capacity battery and a Type-C charging interface. Before first use, fully charge the device. A full charge typically takes approximately 4 hours and provides up to 12 hours of continuous use at low intensity, or 7-8 hours at high intensity.

• Connect the provided Type-C cable to the charging port on the lamp.
• Connect the other end of the cable to a compatible USB power adapter (not included).
• The indicator light will show charging status (e.g., red for charging, off for full).

Image 3: Battery life and charging information.

5.2 Placement

Place the lamp on a stable, flat surface. For optimal projection, position it in a dark room, ideally where the light can project onto a ceiling or wall without obstruction.

Image 4: Recommended placement for the lamp.

6. Operating Instructions

6.1 Power On/Off

Locate the power button on the device. Press and hold to turn the lamp on or off.

6.2 Color Changes and Dimming

The lamp features 7 different light modes and stepless dimming functionality, controlled via the 'M' button.

• Short Press 'M' button: Cycles through the 7 available color modes in sequence.
• Long Press 'M' button: Activates smooth brightness adjustment (stepless dimming) from 20% to 100%. Release the button at your desired brightness level.

Image 5: Controls for color and brightness.

Image 6: Examples of the 7 color modes.

7. Maintenance

• Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the charging port is free of dust and debris.
• Store the lamp in a cool, dry place when not in use for extended periods.

8. Troubleshooting

8.1 Lamp Does Not Turn On

• Ensure the battery is charged. Connect the lamp to a power source using the Type-C cable.
• Verify that the power button is pressed correctly.

8.2 Light Projection is Dim or Unclear

• Check the brightness setting and adjust using a long press of the 'M' button.
• Ensure the room is sufficiently dark for optimal projection.
• Clean the projection surface of the lamp if it appears dusty.

8.3 Charging Issues

• Confirm the Type-C cable is securely connected to both the lamp and the power adapter.
• Try a different USB power adapter or charging port.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official AmmToo website. Keep your proof of purchase for any warranty claims.