RESUXI JM114

RESUXI Professional Replacement Clipper Blades

Model: JM114

Introduction

Thank you for choosing RESUXI Professional Replacement Clipper Blades. These precision-engineered blades are designed to provide a smooth and efficient cutting experience, serving as an ideal replacement for worn or damaged blades on compatible hair clippers. This manual provides essential information on product features, compatibility, installation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new blades.

RESUXI Professional Replacement Clipper Blades, showing both the fixed and moving blades. — Image: RESUXI Professional Replacement Clipper Blades. This image displays the two main components of the replacement blade set: the larger fixed blade and the smaller moving blade, both made of polished metal.

Product Features

High Carbon Steel Construction: Engineered for durability and long-lasting sharpness.
Precision 2-Hole Design: Ensures secure and accurate fitting on compatible clippers.
Adjustable and Detachable: Designed for easy replacement and maintenance.
Fade Blade Type: Optimized for smooth fading and blending.
Professional Grade: Suitable for both professional and home use.

Close-up of RESUXI clipper blades highlighting high carbon steel material and precision details. — Image: High Carbon Steel Blade. This image provides a detailed view of the blade components, emphasizing the material and the fine teeth, along with close-ups of the screw holes and blade edges.

Compatibility

These replacement blades are designed to be compatible with a range of professional hair clippers. Please verify your clipper model against the list below:

Compatible Wahl Clipper Models:

Wahl 5-Star Senior
Wahl Magic Clip
Wahl Reflections Senior

Compatible RESUXI Clipper Models:

JM2022
JM2021
JM106
JM104
JM101
JM107

Diagram showing dimensions of clipper blades and a list of compatible models. — Image: Blade Dimensions and Fit Models. This image illustrates the physical dimensions of both the fixed and moving blades, along with a clear list of compatible Wahl and RESUXI clipper models.

Setup and Installation

Follow these steps to safely replace your clipper blades:

Step 1: Unscrew the Old Blade. Using a suitable screwdriver, carefully unscrew the two screws holding the existing blade assembly to the clipper body. Set the screws aside in a safe place.
Step 2: Remove and Replace. Gently remove the old blade assembly. Position the new RESUXI replacement blade set onto the clipper, ensuring the holes align correctly with the screw posts.
Step 3: Adjust Position. Before fully tightening, slightly adjust the position of the new blade. Ensure the top blade (cutter) is aligned perfectly with the bottom blade (comb) to prevent skin nicks and ensure an even cut. The top blade should be slightly behind the bottom blade.
Step 4: Secure the Blade. Once the blade is properly aligned, carefully tighten the two screws. Do not overtighten, as this can damage the blade or clipper. Test the clipper by turning it on briefly to ensure smooth operation.

Step-by-step visual guide for installing clipper blades. — Image: Installation Display. This visual guide shows four steps: unscrewing the old blade, replacing it with the new one, adjusting the blade's position for proper alignment, and finally, securing the new blade by tightening the screws.

Operating Instructions

Once installed, your new RESUXI blades are ready for use with your compatible clipper. For optimal performance and safety:

Ensure the clipper is clean and free of hair debris before each use.
Apply a few drops of clipper oil to the blades before and after each use to maintain sharpness and reduce friction.
Always use the appropriate guard size for the desired hair length.
Move the clipper smoothly and steadily through the hair, avoiding excessive pressure.
Regularly check blade alignment, especially after cleaning or if the clipper is dropped.

Hair clipper with RESUXI blade in use, cutting hair. — Image: Clipper in Use. This image depicts a barber using a hair clipper, presumably fitted with the RESUXI blade, to trim a client's hair, demonstrating the product in its intended application.

Maintenance

Proper maintenance is crucial for extending the life and performance of your clipper blades:

Cleaning: After each use, brush off any loose hair from the blades using a small cleaning brush. For a deeper clean, you may detach the blades and rinse them under running water (ensure the clipper body does not get wet). Dry thoroughly immediately.
Oiling: Apply 1-2 drops of clipper oil to the teeth of the blades and along the friction points where the two blades meet. Turn the clipper on for a few seconds to distribute the oil. This reduces heat, friction, and wear.
Storage: Store your clipper with the blades attached in a clean, dry place, away from moisture and extreme temperatures.
Inspection: Periodically inspect the blades for any signs of wear, damage, or dullness. Replace blades if they show significant wear or if cutting performance degrades.

Troubleshooting

Problem	Possible Cause	Solution
Blades pulling or snagging hair	Dull blades, improper alignment, lack of oil, hair buildup.	Clean and oil blades. Check blade alignment and adjust if necessary. If blades are old or damaged, replace them.
Uneven cutting	Improper blade alignment, damaged blade teeth.	Re-align blades carefully. Inspect for bent or broken teeth; replace blades if damaged.
Blades getting hot quickly	Lack of lubrication, excessive friction.	Apply clipper oil generously to the blades. Ensure blades are clean and free of debris.
Blades making excessive noise	Loose screws, lack of oil, foreign object.	Tighten blade screws (do not overtighten). Oil blades. Check for any trapped hair or debris.

Specifications

Brand: RESUXI
Model Number: JM114
Material: High Carbon Steel
Blade Type: Fade Blade, 2-Hole Design
Package Dimensions: 4.96 x 3.62 x 0.35 inches
Item Weight: 1.76 ounces
Recommended Uses: Clipping, Professional, Trimming
Hair Type: All

Warranty and Support

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. For product-specific inquiries or support, please refer to the retailer or manufacturer's official website for the most current contact information and warranty details.

As replacement parts, these blades typically fall under the warranty of the original clipper or a limited warranty for manufacturing defects. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.