Mast Tour Y22 Cordless Tattoo Pen Machine Instruction Manual

1. Introduction and Overview

The Mast Tour Y22 is an updated version of the Mast Tour machine, designed to be thinner and lighter. It features a visual LCD screen for easy voltage adjustment, making operation more intuitive. This machine is suitable for both tattooing and permanent makeup applications.

Key Features:

• Updated Design: Thinner and lighter than previous Mast Tour models.
• Visual LCD Screen: Allows for precise voltage adjustment in 0.1V increments (from 5V to 12V).
• Cordless or Corded Operation: Equipped with an RCA jack for versatile use.
• Custom Mast Motor: Coreless motor designed for efficiency, smooth speed changes, and minimal vibration, requiring no maintenance.
• Digital Display Battery: Replaceable battery with overcharge protection, short circuit protection, and temperature control.

2. Safety Information

For external use only.

Always ensure proper sterilization of all equipment and work surfaces before and after each use. Use appropriate personal protective equipment, such as gloves, to maintain a sterile environment. Consult with a professional for proper training and safety protocols related to tattooing and permanent makeup.

3. Setup and Assembly

3.1 Unboxing and Components

Upon unboxing, verify that all components are present:

• 1x Mast Tour Y22 wireless tattoo pen (Black color)
• 1x RCA cord
• 1x Type-C charged Cord

3.2 Charging the Battery

The Mast Tour Y22 features a replaceable battery with an LCD digital display. Use the provided USB Type-C charging cord to charge the machine. A full charge typically takes 2 hours and provides more than 4 hours of working time.

3.3 Cordless or Corded Operation

The Mast Tour Y22 machine offers flexibility with both cordless and corded operation. You can use it wirelessly with the built-in battery or connect it via the RCA jack for continuous power.

3.4 Installing Cartridge Needles

To install cartridge needles, simply push them into the machine. To adjust the needle depth, spin the battery part of the machine. This allows for precise control over needle protrusion.

3.5 Custom Mast Coreless Motor

The Tour Y22 cordless pen utilizes a custom Mast coreless motor, operating at 8V-10000rpm. This motor is designed for smooth speed changes and minimal vibration, contributing to efficient and power-saving operation.

4. Operating Instructions

The machine features an LCD digital display for voltage adjustment. You can adjust the voltage from 5V to 12V in 0.1V increments. Use the '+' and '-' buttons to increase or decrease the voltage as needed for your specific application.

Voltage Adjustment:

Video 1: Demonstrates how to adjust the voltage on the Mast Tour Y22 machine and its operation.

Video 2: Overview of the Mast Tour Y22's features and operation.

5. Maintenance

The custom Mast coreless motor used in the Tour Y22 is designed to be maintenance-free. For general care, ensure the machine is kept clean and free from ink or debris. Wipe down the exterior with appropriate cleaning solutions after each use. Store the machine in a dry, safe place when not in use.

6. Troubleshooting

If the machine suddenly shuts off or experiences issues, follow these steps:

1. First, open the machine by separating the battery section.
2. Second, long press the power button and the "+" button simultaneously until the display shows "R0". Release the buttons.
3. Third, turn off the machine.
4. Last, turn it on again. This should resolve the issue.

Ensure the battery is adequately charged. If issues persist, refer to the warranty and support information.

7. Specifications

8. Warranty and Support

The Mast Tour Y22 Cordless Tattoo Pen Machine Kit comes with a one-year warranty. For any inquiries, technical assistance, or warranty claims, please contact our friendly customer service team. Refer to the contact information provided in your product packaging or visit the official MAST TATTOO store on Amazon for support.

For additional products and information, visit the MAST TATTOO Store.