Easytry123 VSX-S500-S, VSX-S300-S, VSX-S501

Easytry123 Replacement Remote Control Instruction Manual

For Pioneer VSX-S500-S, VSX-S300-S, VSX-S501 A/V Receivers

1. Introduction

This manual provides instructions for the Easytry123 replacement remote control, designed for use with Pioneer A/V Receivers models VSX-S500-S, VSX-S300-S, and VSX-S501. This remote offers a convenient way to operate your receiver's primary functions. Please note that while this replacement remote is highly functional, some advanced or less frequently used features present on the original remote may not be fully supported.

2. Product Overview

The Easytry123 replacement remote control is an ergonomic device designed for comfortable handling and intuitive operation of your Pioneer A/V receiver. It features a standard button layout for common functions.

Front view of the Easytry123 replacement remote control for Pioneer A/V receivers.

This image displays the front of the Easytry123 replacement remote control, highlighting its ergonomic design and button layout. Key buttons for receiver control, input selection, volume, and navigation are visible, providing a clear visual reference for users.

Angled view of the Easytry123 replacement remote control for Pioneer A/V receivers.

This image provides an angled perspective of the Easytry123 replacement remote control, showcasing its overall form factor and the arrangement of its various function buttons. This view helps users understand the physical design and button placement for specific Pioneer A/V receiver models.

3. Setup

3.1 Battery Installation

The remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote and must be purchased separately.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch and lift to open the compartment.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Note: Always use fresh batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.

4. Operating Instructions

This remote control is pre-programmed for the specified Pioneer A/V receiver models. No additional setup or programming is typically required after battery installation.

4.1 Basic Functions

  • POWER (RECEIVER ON/OFF): Press to turn the A/V receiver on or off.
  • INPUT SELECT: Use these buttons (e.g., BD DVD, CD, TV, TUNER, DVR) to switch between different audio/video input sources connected to your receiver.
  • VOL (+/-): Adjusts the master volume level of the receiver.
  • MUTE: Temporarily silences the audio output. Press again to restore sound.
  • NAVIGATION (Up/Down/Left/Right/ENTER): Used to navigate menus and confirm selections on your receiver's display.

4.2 Advanced Functions

  • TUNER: Accesses the receiver's radio tuner functions.
  • PRESET (+/-): Navigates through saved radio station presets.
  • AUDIO PARAMETER: Accesses audio settings and sound modes.
  • DISPLAY: Changes the information shown on the receiver's front panel display.
  • NUMBER BUTTONS (0-9): Used for direct input of channel numbers or other numerical selections.

Important: The functionality of certain buttons may vary slightly depending on the specific model of your Pioneer A/V receiver and its current operational mode. Refer to your receiver's original manual for detailed function descriptions.

5. Troubleshooting

  • Remote not responding:
    • Ensure batteries are inserted correctly with the correct polarity.
    • Replace old batteries with new ones.
    • Check for any obstructions between the remote and the receiver's infrared sensor.
    • Ensure the remote is pointed directly at the receiver.
  • Specific buttons not working:
    • Some advanced functions may not be supported by this replacement remote.
    • Verify that the receiver is in the correct operating mode (e.g., Tuner mode for tuner buttons).
  • Receiver not turning on/off:
    • Confirm the receiver is plugged into a power source and is not in a standby mode that prevents remote power-on.

6. Specifications

  • Connectivity Technology: Infrared (IR)
  • Controller Type: Button Control
  • Power Source: 2 x AAA Batteries (not included)
  • Special Feature: Ergonomic Design
  • Manufacturer: Easytry123
  • Compatible Models: Pioneer VSX-S500-S, VSX-S300-S, VSX-S501 A/V Receivers

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
  • Storage: When not in use for extended periods, remove the batteries to prevent leakage, which can damage the remote. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the remote or subjecting it to strong impacts, as this can cause internal damage.

8. Warranty and Support

As a replacement item, this remote control may not offer the same warranty terms as original equipment. For specific warranty information or technical support, please refer to the seller or manufacturer, Easytry123, through your purchase platform. It is important to ensure that this remote matches your unit's model number for optimal compatibility.

Easytry123 Replacement Remote Control Manual © 2023. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.