PowMr POW-HVM5.5K-48V
Contents
PowMr 5500W Hybrid Inverter User Manual
Model: POW-HVM5.5K-48V
1. Product Overview
The PowMr 5500W Hybrid Inverter is a versatile power solution designed for off-grid solar systems. It integrates a pure sine wave inverter, an 80A MPPT solar charge controller, and a battery charger into one compact unit. This inverter is compatible with various battery types, including 48V Lead-Acid (Sealed, AGM, Gel, Flooded) and Lithium batteries, and can even operate without a battery.
- Pure Sine Wave Output: Provides stable 230Vac±5% power, suitable for sensitive electronics.
- High Power Capacity: Max input power of 5500W with a Max PV Array Open Circuit Voltage of 500VDC.
- Integrated MPPT Charge Controller: Features an 80A MPPT charge controller for efficient solar charging.
- Flexible Battery Compatibility: Supports 48V Lead-Acid and Lithium batteries, and can function without a battery.
- User-Friendly Interface: Comprehensive LCD display and accessible buttons for configurable settings like battery charging current, AC/solar charger priority, and input voltage range.
- Comprehensive Protections: Includes overload, over-temperature, and short-circuit protection for safe operation.
- Wide Application: Capable of powering various home and office appliances, including motor-type loads.

Figure 1.1: Front view of the PowMr 5500W Hybrid Inverter.
2. Safety Information
Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.
- Ensure all wiring is performed by qualified personnel.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Install the inverter in a well-ventilated area, away from flammable materials.
- Ensure proper grounding of the unit.
- Disconnect all power sources (AC, DC, PV) before performing any maintenance or wiring.
- Wear appropriate personal protective equipment (PPE) during installation and maintenance.
3. Product Components and Connections
Familiarize yourself with the various components and connection points of your PowMr Hybrid Inverter.

Figure 3.1: Front and Rear Panel Diagram with labeled components.
| No. | Component | No. | Component |
|---|---|---|---|
| 1 | LCD display | 9 | PV input |
| 2 | Status indicator | 10 | Battery input |
| 3 | Charging indicator | 11 | Circuit breaker |
| 4 | Fault indicator | 12 | RS232 communication port |
| 5 | Function buttons | 13 | Dry contact (Optional) |
| 6 | Power on/off switch | 14 | USB communication port (Optional) |
| 7 | AC input | 15 | Grounding |
| 8 | AC output |
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your inverter. Follow these steps carefully.
4.1 Battery Connection
The inverter supports various 48V battery types. Ensure correct polarity when connecting batteries.

Figure 4.1: The inverter is compatible with 48V lead-acid (Sealed/AGM/Flooded/Gel) and Lithium batteries, and can also operate without a battery.
Important: Always connect the battery first before connecting solar panels or AC input. Ensure the inverter's power switch is OFF during battery connection.
4.2 System Wiring Diagram
The inverter can be integrated into a hybrid power system, utilizing solar, utility, and generator inputs to power home appliances.

Figure 4.2: Hybrid Power System overview, illustrating connections for solar panels, generator, utility grid, battery, and household loads.
For detailed wiring instructions, refer to the video below:
Video 4.1: Installation guide for the PowMr 5500W Solar Inverter, demonstrating the connection of battery cables and the proper placement of the cover. This video highlights the built-in 80A MPPT solar controller.
5. Operating Instructions
This section details how to operate your PowMr Hybrid Inverter, including display navigation and mode selection.
5.1 Operation and Display Panel
The inverter features an LCD display and LED indicators to provide real-time status and allow for configuration.

Figure 5.1: Detailed view of the inverter's operation and display panel, showing the LCD, LED indicators, and function buttons.
| LED Indicator | Messages |
|---|---|
| AC / INV (Green) | Solid On: Output is powered by utility in Line mode. Flashing: Output is powered by battery or PV in battery mode. |
| CHARGE (Green) | Solid On: Battery is fully charged. Flashing: Battery is charging. |
| FAULT (Red) | Solid On: Fault occurs in the inverter. Flashing: Warning condition occurs in the inverter. |
5.2 Working Modes: Charging and Output
The inverter offers four charging modes and three output modes to optimize power management based on your needs.

Figure 5.2: Diagram illustrating the four charging modes (Solar Charging Only, Electricity Utility Priority, Solar Priority, Hybrid Charging) and three output modes (PV Priority, Utility Priority, Inverter Mode).
For a visual demonstration of the inverter's operation and features, please watch the video below:
Video 5.1: Overview of the PowMr 5500W Solar Hybrid Inverter, showcasing its features and operational display. This video demonstrates the inverter's ability to run without a battery and its DC48V to 220/230VAC output.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter.
- Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
- Connections: Annually check all electrical connections for tightness. Loose connections can cause overheating and damage.
- Battery Health: If using batteries, monitor their health and charge levels regularly. Follow battery manufacturer's guidelines for maintenance.
- Environment: Ensure the installation environment remains within the specified temperature and humidity ranges.
7. Troubleshooting
This section provides solutions to common issues you might encounter with your inverter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not turning on | No DC input from battery/PV; Loose battery connections; Circuit breaker tripped. | Check battery voltage; Ensure battery cables are securely connected; Reset circuit breaker. |
| No AC output | Overload; Short circuit; Low battery voltage; Inverter fault. | Reduce load; Check for short circuits in wiring; Charge battery; Check fault indicator and refer to manual. |
| PV charging not working | Insufficient solar input; PV array voltage too low/high; Loose PV connections. | Check solar panel exposure; Verify PV array voltage is within MPPT range (120VDC~450VDC); Secure PV wiring. |
| Fans constantly running | High internal temperature; Normal operation under load. | Ensure adequate ventilation; This may be normal during high load or charging. |
The inverter is equipped with intelligent protection systems to prevent damage. Refer to the product overview for a list of protection modes.

Figure 7.1: The inverter features 15 intelligent protection modes, including charge low/high temperature, discharge low/high temperature, overcurrent, undervoltage, short-circuit, solar panel reverse connection, battery overvoltage, over temperature, and overload protection.
8. Specifications
Detailed technical specifications for the PowMr 5500W Hybrid Inverter.
| Feature | Value |
|---|---|
| Model Name | POW-HVM5.5K-48V |
| Rated Power | 5500VA/5500W |
| DC Input | 48VDC, 127A |
| AC Output | 230VAC, 50/60Hz, 23.9A, 1Φ |
| Operating Temperature Range | -10~55°C |
| Ingress Protection | IP21 (Indoor use) |
| Item Weight | 23.9 pounds |
| Package Dimensions | 22 x 15 x 7 inches |
8.1 Solar Charger Mode Specifications
| Feature | Value |
|---|---|
| Max PV Array Power | 5500W |
| Min Solar Voltage | 120VDC |
| Max Solar Voltage (VOC) | 500VDC |
| Max Input Current | 18A |
| PV Array MPPT Voltage Range | 120VDC~450VDC |
8.2 AC Charger Mode Specifications
| Feature | Value |
|---|---|
| AC Input | 230VAC, 50/60Hz, 40A, 1Φ |
| DC Output | 54VDC |
| Max Current | 80A, Default 30A |
8.3 PV Module Selection Guidelines
When selecting PV modules, ensure the Open Circuit Voltage (Voc) does not exceed the inverter's maximum PV array open circuit voltage (500VDC) and is higher than the minimum battery voltage.
| Solar Panel Spec. (reference) | SOLAR INPUT | Q'ty of panels | Total input power |
|---|---|---|---|
| - 330Wp - Vmp: 33.25Vdc - Imp: 9.925A - Voc: 40.35Vdc - Isc: 10.79A - Cells: 60 | Min in serial: 6 pcs, max in serial: 12 pcs | 6 pcs | 1980W |
| 10 pcs in serial | 10 pcs | 3300W | |
| 12 pcs in serial | 12 pcs | 3960W | |
| 6 pieces in serial and 2 sets in parallel | 12 pcs | 3960W | |
| 8 pieces in serial and 2 sets in parallel | 16 pcs | 5280W |
9. Warranty and Support
For warranty information and technical support, please contact PowMr customer service. Keep your purchase receipt as proof of purchase.
You can find more information and contact details on the official PowMr store page: PowMr Amazon Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.