1. Introduction
Thank you for choosing the Edostory Inflatable Hot Tub Spa. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your new hot tub. Please read this manual thoroughly before installation and keep it for future reference.
The Edostory Inflatable Hot Tub Spa, featuring a sleek black and white design, comes with two filter cartridges and a convenient side table, ready for setup.
This hot tub is designed to comfortably accommodate 2-4 persons, making it ideal for small groups or families.
2. Safety Information
Always follow basic safety precautions when installing and using this electrical product. Failure to follow these instructions could result in injury or death.
- Do not operate the hot tub if the water temperature is above 104°F (40°C).
- Supervise children at all times.
- Consult a doctor before use if you have health conditions, are pregnant, or are on medication.
- Do not use electrical appliances near the hot tub.
- Ensure the hot tub is placed on a flat, stable surface capable of supporting its full weight when filled.
- Always use the provided cover when the hot tub is not in use to prevent accidental drowning and heat loss.
3. Package Contents
Verify that all components listed below are included in your package:
An overview of the items included in your hot tub package, ensuring you have everything needed for setup and operation.
| Item No. | Description |
|---|---|
| 1 | Inflatable Spa Tub |
| 2 | Zip Cover |
| 3 | Inflation Hose |
| 4 | 2 x Filter Cartridges |
| 5 | Repair Kit |
| 6 | Filter Cover |
| 7 | Ground Sheet |
| 8 | Instruction Manual |
| 9 | 1 x 1 Way Valve |
| 10 | 2 x Air Valve Cap |
| 11 | 1 x Drainage Bung |
| 12 | 2 x Child Safety Key |
| 13 | 1 x Water Inlet/Outlet Spanner |
4. Setup
4.1 Site Selection
Choose a flat, level surface free of sharp objects. Ensure adequate drainage is available for water changes and spills. The area should be able to support the weight of the filled hot tub (approximately 1500 lbs for water + tub + occupants).
The hot tub measures 75 inches in length and 25 inches in height, requiring sufficient space for placement.
4.2 Inflation
The Edostory hot tub features a built-in air pump for easy inflation. Connect the inflation hose to the air inlet valve on the hot tub and the pump. Press the 'Bubble' button on the control panel to begin inflation. Inflate until the tub is firm to the touch but not over-inflated. Do not use an external pump.
The built-in inflation system simplifies setup, allowing for quick and easy inflation by connecting the hose to the air inlet.
4.3 Filling the Hot Tub
Once inflated, ensure the drain plug is securely closed. Fill the hot tub with water using a garden hose, up to the maximum fill line indicated on the interior wall. Do not overfill.
4.4 Filter Cartridge Installation
Install the two filter cartridges into their designated housings inside the hot tub. Ensure they are securely twisted into place.
5. Operating the Hot Tub
5.1 Control Panel Functions
The digital control panel allows you to manage all hot tub functions:
The digital control panel provides intuitive access to all hot tub functions, including temperature, filtration, and bubble activation.
- Temperature Increase/Decrease: Use the up/down arrows to set your desired water temperature (Max 104°F / 40°C, Min 43°F / 6°C).
- Heater: Activates the heating system to reach and maintain the set temperature.
- Bubble: Activates the 90 AirJet bubble system for a relaxing massage.
- Filter: Turns on the water filtration system to circulate and clean the water.
- Temperature Display: Shows the current water temperature.
Easily control the hot tub's features by pressing the corresponding buttons on the intuitive digital control panel.
5.2 Activating Bubbles
Press the 'Bubble' button on the control panel to activate the 90 AirJet bubble jets. Press again to turn off. The system provides a 360-degree high-powered air jet massage.
The hot tub's powerful AirJet system creates thousands of invigorating bubbles for a complete body massage.
6. Maintenance
6.1 Water Filtration
The hot tub is equipped with an automatic water filtration system. Regularly check and clean the filter cartridges to ensure optimal performance and water clarity. Replace cartridges every 1-2 months depending on usage.
The automatic water filtration system, including two filter cartridges, helps keep your spa water clean and clear.
Proper installation of the filter cartridge is crucial for effective water filtration and maintaining water quality.
6.2 Water Chemistry
Maintain proper water chemistry by regularly testing pH and sanitizer levels. Follow guidelines for hot tub chemicals to prevent algae growth and ensure a safe bathing environment.
6.3 Cleaning and Draining
Drain the hot tub periodically for thorough cleaning. Use a soft cloth and mild, non-abrasive cleaner for the interior and exterior surfaces. Ensure the hot tub is completely dry before deflating and storing.
The hot tub features a drainage bung for easy water removal. Simply open the bung to allow water to drain. Ensure the drainage area is clear.
6.4 Storage
When not in use for extended periods, especially in temperatures below 43°F (6°C), drain, clean, and deflate the hot tub. Store it in a dry, protected area, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your hot tub, refer to the following common problems and solutions:
- Hot Tub Not Heating: Ensure the heater function is activated on the control panel. Check power supply and ensure the water level is above the minimum line. If the issue persists, contact customer support.
- Bubbles Not Working: Verify the bubble function is activated. Check for any blockages in the air jet system.
- Water Not Filtering: Ensure the filter function is on and filter cartridges are clean and properly installed.
- Water Leaking: Check for visible punctures or loose connections. Use the provided repair kit for small punctures. For significant leaks, contact customer support.
- Hot Tub Losing Air: Check all valves and caps for secure closure. Inspect the hot tub surface for small holes or tears.
For problems not listed here or if solutions do not resolve the issue, please contact Edostory customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | EDOSTORY |
| Model Name | PH050012-011-Black |
| Color | Black |
| Product Dimensions | 75"L x 47"W x 25"H |
| Item Weight | 53 Pounds |
| Material | Polyvinyl Chloride (PVC) |
| Shape | Oval |
| Number of Jets | 90 |
| Seating Capacity | 2, 4 |
| Assembly Required | Yes |
9. Warranty and Support
Edostory provides a warranty for this product. If the hot tub you received has any problems, please do not hesitate to contact us. We are committed to providing premium after-sale service to help solve any problem you may encounter.
Please refer to your purchase documentation or the official Edostory website for specific warranty terms and contact information.
