Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric Annecy 3-Light Flush Mount Ceiling Light (Model 65457). Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The Globe Electric Annecy 3-Light Flush Mount Ceiling Light, matte gold finish with clear glass shades, installed in a modern hallway above a white double door.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC).
- Use only the specified bulb type and wattage.
- Do not install this fixture in wet locations. For indoor use only.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- Flush Mount Ceiling Light Fixture (1)
- Glass Shade (3)
- Mounting Hardware Kit (1)
- Instruction Sheet (1)
Setup and Installation
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Electrical Tape
- Safety Glasses
- Ladder
Installation Steps
- Turn Off Power: Before starting, ensure the power to the circuit is turned off at the main fuse box or circuit breaker to prevent electrical shock.
- Prepare Mounting Surface: Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Connect Wires:
- Connect the bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Secure all wire connections with electrical tape.
- Mount Fixture: Carefully tuck the wires into the junction box. Align the fixture base with the mounting holes on the junction box and secure it using the provided mounting screws.
- Attach Glass Shades: Carefully thread each clear glass shade onto the fixture's sockets. Ensure they are securely tightened but do not overtighten.
- Install Bulbs: Screw in three E26/Medium Base 60W maximum bulbs (sold separately) into the sockets.
- Restore Power: Once installation is complete, restore power at the circuit breaker or fuse box.
Image: A detailed view of the fixture's matte gold base, showing the attachment points for mounting to the ceiling junction box.
Image: A close-up of the light fixture showing the clear glass shades attached to the matte gold base, with vintage-style E26 bulbs visible inside.
Operating Instructions
This fixture operates with a standard wall light switch. Ensure compatible bulbs are installed for optimal performance.
- Bulb Requirements: Requires 3x E26/Medium Base 60W maximum bulbs (sold separately). Compatible with LED, Incandescent, and Halogen bulbs. LED or Incandescent bulbs are recommended.
- Dimmable Functionality: The fixture is fully dimmable when used with compatible dimmable bulbs and a compatible dimmer switch (both sold separately).
Maintenance
Cleaning
To clean the fixture, ensure power is turned off. Wipe the matte gold finish with a soft, dry cloth. For glass shades, use a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that may damage the finish.
Bulb Replacement
Before replacing bulbs, turn off power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E26/Medium Base 60W maximum bulbs. Do not exceed the maximum wattage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass shade is loose. |
|
|
Specifications
| Model Number | 65457 |
| Brand | Globe Electric |
| Dimensions (L x W x H) | 33L x 33W x 39.1H centimetres |
| Weight | 2.25 kg |
| Material | Glass, Metal |
| Finish | Matte Gold |
| Bulb Base | E26 (Medium Base) |
| Number of Lights | 3 |
| Max Wattage per Bulb | 60W |
| Voltage | 120 volts |
| Installation Type | Flush Mount |
| Indoor/Outdoor Usage | Indoor |
Image: A technical diagram illustrating the dimensions of the Annecy 3-Light Flush Mount Ceiling Light, including height, width, and depth measurements in inches and centimeters.
Warranty Information
According to manufacturer specifications, this product does not come with a warranty.
Customer Support
For further assistance or inquiries, please contact Globe Electric customer service. Manufacturer contact information: Pointe-Claire, QC H9R 1A8, CA.
You may also visit the official Globe Electric website for additional resources and support.
