Introduction
This manual provides detailed instructions for the e-vibra RW15 Vibrating Alarm Watch. This device is designed to provide discreet reminders through silent vibration, suitable for various applications such as potty training, medication reminders, hydration alerts, and daily scheduling. Please read this manual thoroughly before using the watch to ensure proper operation and longevity.
Product Features
- Timer Function: Preset repeating timers for intervals such as 1, 5, 10, 15, 20, 30, 45, 60, 90, 120 minutes, or 3 hours. The automatic repeating vibration serves as a reminder for tasks like potty breaks or drinking water.
- Multiple Alarm Settings: Configure up to 15 individual vibrating alarms. These silent vibrations provide discreet reminders without disturbing others, ideal for potty training, medication schedules, homework, or wake-up calls.
- Safety Tested Design: The watch features a lightweight, soft silicone wristband designed to fit wrists approximately 4 to 8 inches (10 to 20 cm).
- Rechargeable & Water Resistant: The watch offers a battery life of 6 to 30 days on a single full charge. It is designed to be water resistant, allowing for use during showers.
- Easy to Use: Programming is performed directly on the watch. A Power-Off Memory function saves all alarm settings, eliminating the need for re-setup after power cycles.
Package Contents
The e-vibra RW15 Vibrating Alarm Watch package typically includes:
- 1 x e-vibra RW15 Vibrating Alarm Watch
- 1 x User Manual (this document)
Note: The watch features an integrated USB-A connector for charging, eliminating the need for a separate charging cable.
Product Overview
The e-vibra RW15 watch features a minimalist design with a digital display and two control buttons.
Figure 1: Watch Dimensions. This image illustrates the physical dimensions of the watch face (2.36 inches / 6cm length, 1.46 inches / 3.7cm width) and the total band length (9.65 inches / 24.5cm). It also shows the recommended wrist girth range of 4.6 to 7.5 inches (12cm to 19cm).
Figure 2: Front View of the Watch. A detailed view of the e-vibra RW15 watch in pink, highlighting its digital display and the soft silicone band.
Buttons:
- Left Button: Typically used for mode selection and navigating through settings.
- Right Button: Used for adjusting values (e.g., hours, minutes) and confirming selections.
Setup
1. Charging the Watch
The e-vibra RW15 watch features an integrated USB-A connector for convenient charging without an additional cable.
- Gently remove the watch face from the silicone band to expose the USB-A connector.
- Plug the exposed USB-A connector directly into any standard USB port, such as on a computer, power bank, or USB wall adapter.
- The display will show a charging indicator. A full charge typically takes a few hours.
Figure 3: Charging the Watch. The watch face is shown connected directly to a laptop's USB port, demonstrating the integrated charging method.
Figure 4: Integrated USB Charging. This diagram highlights the "Male" USB-A connector on the watch and shows it plugged into a power strip, indicating no extra charging cable is needed.
2. Initial Time Setting
Upon first use or after a prolonged period without power, you may need to set the current time.
- Press the Left Button repeatedly until the time display starts flashing.
- Use the Right Button to adjust the hour. Press the Left Button to confirm and move to minutes.
- Use the Right Button to adjust the minutes. Press the Left Button to confirm and exit time setting mode.
Operating Instructions
1. Setting Alarms (Up to 15 Alarms)
The watch allows you to set up to 15 distinct vibrating alarms.
- Press the Left Button repeatedly until you see "A1" (Alarm 1) displayed.
- Press the Right Button to toggle the alarm ON or OFF. When ON, the time will flash.
- With the hour flashing, use the Right Button to adjust the hour. Press the Left Button to confirm and move to minutes.
- Use the Right Button to adjust the minutes. Press the Left Button to confirm and move to the next alarm setting (A2, A3, etc.).
- Repeat steps 2-4 for each alarm you wish to set. After setting the last alarm, press the Left Button to return to the main time display.
Video 1: Setting Alarms. This video demonstrates the process of setting the vibrating alarms on the e-vibra watch, including how to navigate through alarm settings and adjust times.
2. Using the Repeating Timer Function
The repeating timer provides periodic vibrations for consistent reminders.
- Press the Left Button repeatedly until you see "TMR" (Timer) displayed.
- Press the Right Button to cycle through the available timer intervals: 1min, 5min, 10min, 15min, 20min, 30min, 45min, 60min, 90min, 120min, or 3 hours.
- Once your desired interval is selected, press the Left Button to activate the timer. The watch will vibrate at the set interval until manually stopped or the battery depletes.
- To stop the timer, press the Left Button until "TMR OFF" is displayed, then press the Right Button to confirm.
3. Water Resistance
The e-vibra RW15 watch is designed to be water resistant, suitable for daily activities such as hand washing and showering. It is not intended for swimming or prolonged submersion in water.
Figure 5: Water Resistance Demonstration. This image shows the watch in water, indicating its water-resistant capabilities for everyday use.
Video 2: Water Resistance Test. This video demonstrates the e-vibra watch's water resistance by showing it submerged in water, confirming its suitability for wet environments like showers.
4. Lock Function
To prevent accidental changes to settings, the watch may feature a lock function. Consult the on-screen prompts or experiment with holding down both buttons simultaneously for a few seconds to activate/deactivate a lock mode, if available.
Maintenance
- Cleaning: Wipe the watch and band with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Battery Care: For optimal battery life, avoid fully discharging the watch frequently. Charge it when the battery indicator is low.
- Storage: Store the watch in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Watch not turning on or displaying anything. |
|
| Vibration is weak or not occurring. |
|
| Time or alarm settings are incorrect after power off. |
|
| Watch is not responding to button presses. |
|
Specifications
- Model Name: Vibrating alarm watch
- Model Number: RW15
- Brand: e-vibra
- Item Weight: 40 g
- Material: Silicone (Band), Stainless Steel (Case)
- Display Type: Digital
- Watch Movement Type: Quartz
- Power Source: Rechargeable Battery
- Water Resistance Level: Water Resistant
- Clasp Type: Buckle
- Wrist Girth: Approx. 4" to 8" (10cm to 20cm)
- UPC: 739722251932
Safety Information
- Do not attempt to disassemble or modify the watch.
- Keep the watch away from extreme temperatures and direct sunlight.
- Avoid exposing the watch to strong magnetic fields.
- While water resistant, avoid prolonged submersion or exposure to high-pressure water jets.
- Dispose of the battery according to local regulations. Do not incinerate.
Warranty and Support
For warranty information or technical support, please contact e-vibra customer service through the retailer where the product was purchased or visit the official e-vibra website. Please retain your proof of purchase for warranty claims.
Replacement bands for the e-vibra RW15 watch may be available. Refer to ASIN # B0D257MZBH for compatible replacement bands.