1. Introduction
This manual provides instructions for the truke Buds BTG3 True Wireless Earbuds. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan. The truke Buds BTG3 feature AI-Powered Noise Cancellation, a 55ms low latency gaming mode, and extended playtime.
2. Package Contents
Verify that all items listed below are present in your package:
- 2 x truke Bluetooth Earbuds (Left and Right)
- 1 x Charging Case
- 1 x Type-C Charging Cable
- 1 x User Manual (This Document)
- 1 x Warranty Card
- 2 x Pairs of Eartips (various sizes)
3. Product Overview
The truke Buds BTG3 consist of two earbuds and a charging case. Familiarize yourself with the components for optimal use.
Image: truke Buds BTG3 True Wireless Earbuds and their charging case. The earbuds are black with the truke logo, and the charging case is red with yellow illuminated eyes, indicating its gaming-inspired design.
Earbud Components:
- Touch Control Area: For managing playback, calls, and modes.
- Microphone: For calls and voice commands.
- Charging Contacts: Located at the bottom of the earbud stem.
- Eartip: Silicone tips for comfort and sound isolation.
Charging Case Components:
- Earbud Charging Slots: Securely holds and charges the earbuds.
- Type-C Charging Port: For charging the case.
- LED Indicators: Displays charging status and battery level.
4. Setup and Pairing
4.1 Initial Charging
Before first use, fully charge the earbuds and the charging case.
- Place both earbuds into the charging case. Ensure they are correctly seated and the charging contacts align.
- Connect the Type-C charging cable to the charging port on the case and to a USB power source.
- The LED indicators on the case will show the charging status. Allow approximately 1.5-2 hours for a full charge.
The earbuds offer up to 10 hours of playtime on a single charge, with an additional 38 hours provided by the charging case, totaling up to 48 hours of playtime.
4.2 Bluetooth Pairing
- Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode.
- Activate Bluetooth: On your device (smartphone, tablet, computer), enable Bluetooth.
- Select Device: Search for "truke Buds BTG3" in the list of available Bluetooth devices and select it to connect.
- Confirmation: Once connected, you will hear an audio prompt from the earbuds, and the device will show "Connected."
Note: The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
5. Operation
5.1 Touch Controls
The earbuds feature touch-sensitive controls for various functions:
| Action | Function |
|---|---|
| Single Tap (Left/Right) | Play/Pause Music, Answer/End Call |
| Double Tap (Right Earbud) | Next Track |
| Double Tap (Left Earbud) | Previous Track |
| Triple Tap (Right Earbud) | Activate Gaming Mode (55ms Low Latency) |
| Triple Tap (Left Earbud) | Toggle In-Ear Detection On/Off |
| Long Press (Left/Right, 2 seconds) | Reject Call, Activate Voice Assistant |
5.2 Auto Play/Pause (In-Ear Detection)
The earbuds feature high-precision contact sensors for real-time detection of wearing status. Music will automatically play when you put the earbuds in your ears and pause when you take them out.
Image: Diagram illustrating the Auto Play/Pause function. It shows an earbud being placed in an ear for auto play and removed for auto pause. The charging case is also shown, indicating that triple tapping the left earbud toggles this feature.
To enable or disable this feature, triple tap the left earbud. This setting can also be managed via the companion application.
5.3 AI-Powered Noise Cancellation
The truke Buds BTG3 incorporate Deep Neural Network Call Noise Cancellation Technology. This system uses AI to accurately identify and separate the caller's voice from background noise, ensuring clear communication even in noisy environments.
Image: An exploded view diagram of an earbud, highlighting internal components related to sound processing and AI-powered noise cancellation. Text indicates "AI-Powered Noise Cancellation" and "Deep Neural Network Call Noise Cancellation Technology."
5.4 Gaming Mode (Low Latency)
For an optimized gaming experience, activate the 55ms Ultra Low Latency Gaming Mode. This mode reduces audio delay, allowing for better synchronization between audio and video, which is crucial for gaming.
- Activation: Triple tap the right earbud to enter Gaming Mode.
- Features: Customized tuning effects are applied to accurately identify enemy positions and enhance gunshot effects in games.
Image: A graphic comparing the 55ms latency of truke BTG3 with other earbud models, showing it has one of the lowest latencies. The image emphasizes "Ultra Low Latency" for gaming.
Image: A visual depicting the earbuds and charging case alongside a smartphone displaying a gaming scene with a car and helicopter. Text highlights "Stereo Surround Sound" and "Customized Special Tuning Effects" for gaming, including accurate enemy position identification and enhanced gunshot effects.
5.5 Sound Quality
The earbuds are equipped with 10mm 32Ω Dynamic drivers, delivering high dynamics, sensitivity, and fidelity for a cinematic sound experience. An intelligent equalizer adjusts sound effects for clear audio during movies and deep bass for music.
Image: A detailed cutaway view of an earbud highlighting the 10mm 32Ω Titanium Drivers and internal acoustic structure. Text describes "Cinematic Sound Experience," "High Dynamics," "High Sensitivity," "High Fidelity," and "Dual Audio Decoding" with "Air-RES Bionic cavity" for improved deep bass.
6. Maintenance
6.1 Cleaning
- Regularly clean the earbuds, eartips, and charging contacts with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure the charging contacts on both the earbuds and the case are free from dust and debris to maintain proper charging.
6.2 Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store the device in a cool, dry place, away from extreme temperatures and direct sunlight.
6.3 Water Resistance
The truke Buds BTG3 are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. They are not designed for submersion in water. Avoid exposing them to heavy rain, showering, or swimming.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing/connecting |
|
| Only one earbud working |
|
| Earbuds not charging |
|
| Low volume or poor sound quality |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | truke BTG3 |
| Bluetooth Version | 5.1 |
| Wireless Communication Technology | Bluetooth |
| Audio Driver Type | Dynamic Driver (10mm, 32Ω) |
| Noise Control | AI-Powered Noise Cancellation (Deep Neural Network) |
| Low Latency | 55ms (Gaming Mode) |
| Playtime (Single Charge) | Up to 10 hours |
| Total Playtime (with Case) | Up to 48 hours |
| Charging Time (Case) | Approximately 1.5-2 hours |
| Charging Port | Type-C |
| Water Resistance Level | IPX4 (Water Resistant) |
| Control Method | Touch |
| Microphone | Included |
| Compatible Devices | Android, iOS, Windows, and all other Bluetooth Enabled Devices |
| Item Weight | 43 grams |
| Product Dimensions | 6.4 x 2.7 x 5.1 cm |
9. Warranty and Support
9.1 Warranty Information
The truke Buds BTG3 come with a 1-year warranty. Please refer to the included Warranty Card for detailed terms and conditions. Retain your proof of purchase for warranty claims.
9.2 Customer Support
For any product-related queries, technical assistance, or warranty support, please contact truke customer service:
- Importer: Eccentric Enterprises Private Limited
- Address: Office No. 111, 1st Floor, Maruti Chamber, Plot No. 857-A, Kalamboli, NAVI MUMBAI, Raigarh, Maharashtra, India, 410218
- Contact Number: +91 93541 70767
- Email: support@eccentricindia.com
You can also visit the official truke store on Amazon for more information: truke Store
