ACTIVE Dishwasher Cleaner and Deodorizer Tablets

Introduction

Thank you for choosing ACTIVE Dishwasher Cleaner and Deodorizer Tablets. This product is designed to provide a deep clean for your dishwasher, effectively removing hard water stains, limescale, grime, and odors. Regular use helps maintain optimal dishwasher performance and ensures your dishes come out sparkling clean.

Image: ACTIVE Dishwasher Cleaner 24-pack box, showcasing the product packaging and key benefits.

These tablets are formulated to work with most residential and commercial automatic dishwashing units, including popular brands like GE, Bosch, Frigidaire, LG, Samsung, Whirlpool, Kitchenaid, Kenmore, and Maytag. They are safe for septic systems and feature a natural lemon-citrus scent for a fresh-smelling appliance.

Image: Visual representation of the cleaner's benefits, including penetrating residue, removing odors, eliminating limescale, maintaining performance, and being septic safe.

Safety Information

Always use products as directed. Keep out of reach of small children. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. If irritation persists, seek medical attention.

Ingredients

The ACTIVE Dishwasher Cleaner tablets contain the following ingredients:

• Sodium Carbonate
• Citric Acid Anhydrous
• Sodium Sulfate
• EDTA Disodium Salt
• PEG-6000
• Methylglycine Diacetic Acid

Setup and Preparation

Before using the ACTIVE Dishwasher Cleaner, ensure your dishwasher is completely empty of dishes and cutlery. This allows the cleaner to effectively circulate and clean all internal surfaces of the appliance.

Operating Instructions

Follow these simple steps for optimal cleaning results:

1. Ensure Dishwasher is Empty: Make sure there are no dishes, silverware, or food debris inside the dishwasher.
2. Add Tablet: Remove one tablet from its wrapper. Place the tablet in the detergent dispenser tray.
3. Run Cycle: Close the detergent dispenser and the dishwasher door. Run the dishwasher on a "Normal" wash cycle. Do not use a quick wash or rinse cycle for cleaning.
4. Air-Dry: After the cycle is complete, open the dishwasher door and allow it to air-dry.

Image: Step-by-step visual instructions for using the ACTIVE Dishwasher Cleaner.

For best results and to maintain a clean, odor-free dishwasher, use one or two tablets per month as part of your regular maintenance routine.

Maintenance

Regular maintenance is crucial for the longevity and efficiency of your dishwasher. In addition to monthly cleaning with ACTIVE tablets, consider the following:

• Filter Cleaning: Most dishwashers have a filter near the bottom drain. If possible, remove this filter and clean it by hand to remove any trapped food particles and residue. This prevents clogs and ensures proper drainage.
• Heavy Buildup: If your dishwasher has significant mineral buildup or has not been cleaned in a long time, it may require an immediate second cleaning cycle. Perform two separate cleaning cycles with a single tablet each. Adding more cleaner in one cycle can result in excess foam, which may affect the dishwasher's function.
• Monitoring During Cycle: To ensure proper cleaning, especially with heavy buildup, monitor your dishwasher during the cycle. If you observe any excessive foam or water leaking from the machine, stop the dishwasher and allow the foam and water to drain before resuming.

Image: Advanced Deep Clean Guide illustrating steps for thorough dishwasher maintenance, including filter cleaning and multiple cleaning cycles for heavy buildup.

Troubleshooting

While ACTIVE Dishwasher Cleaner is designed for effective cleaning, here are some common issues and tips:

• Excessive Foam: If you notice excessive foam during a cleaning cycle, it might be due to using too much cleaner or a pre-existing residue. Stop the cycle, allow foam to dissipate, and ensure you are using only one tablet per cycle.
• Residue After Cleaning: For dishwashers with significant hard water buildup or grime, a single cleaning cycle might not be enough. Repeat the cleaning process with a fresh tablet. You may also need to manually scrub internal surfaces after the cycle to remove loosened residue.
• Persistent Odors: If odors persist after cleaning, ensure you are regularly cleaning the dishwasher filter. Also, verify that the dishwasher is completely empty before running the cleaning cycle.

For more detailed troubleshooting, please refer to the official Troubleshooting Guide (PDF) provided by the manufacturer.

Product Specifications

Warranty and Support

For any questions regarding product usage, troubleshooting, or warranty information, please contact ACTIVE customer support directly. You can often find contact details on the product packaging or by visiting the official ACTIVE brand store online.

Visit the ACTIVE Store for more products and information.