1. Introduction
The Philips Splay LED Outdoor Wall Light, model 929003188201, is designed to provide warm, diffused white light for various outdoor environments. This durable, anthracite-colored fixture is constructed from high-quality aluminum and features an IP44 rating, ensuring protection against splashing water. It is ideal for illuminating gardens, patios, and entrance areas, combining functional and decorative lighting to create a pleasant aesthetic on your wall.
Image 1.1: The Philips Splay LED Outdoor Wall Light, showcasing its design and warm white illumination.
2. Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or repair.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.
- Ensure proper grounding of the fixture according to local electrical codes.
- Do not modify the product in any way, as this may void the warranty and create safety risks.
- Keep the product away from flammable materials.
- This product is designed for outdoor use and is rated IP44 for protection against splashing water. Do not immerse in water.
3. Package Contents
Verify that all components are present before beginning installation:
- Philips Splay LED Outdoor Wall Light fixture (1 unit)
- Mounting hardware (screws, wall plugs)
- Instruction manual (this document)
4. Setup and Installation
Follow these steps for safe and correct installation of your outdoor wall light:
- Prepare the Installation Area: Turn off the main power supply to the installation area at your circuit breaker. Ensure the power is completely off before proceeding.
- Select Mounting Location: Choose a suitable, flat outdoor wall surface for mounting. A flat surface ensures easier and more secure installation.
- Mark Drilling Points: Use the light fixture's mounting bracket as a template to mark the desired drilling points on the wall.
- Drill Holes: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
- Wire Connections: Carefully connect the electrical wires from your power supply to the fixture's terminals. Ensure correct connections for Live (L), Neutral (N), and Ground (GND) wires according to local electrical wiring codes. Secure all connections tightly.
- Mount the Fixture: Align the fixture with the wall plugs and secure it firmly to the wall using the provided screws.
- Test Operation: Restore power at the main circuit breaker and test the light to ensure it functions correctly.
Image 4.1: The Philips Splay LED Outdoor Wall Light after successful installation on an exterior wall.
5. Operating Instructions
The Philips Splay LED Outdoor Wall Light is designed for straightforward operation. Once properly installed and connected to your home's electrical system, it will illuminate when power is supplied to the circuit it is connected to. For automated control, you may connect the light to an external light switch, timer, or motion sensor (these control devices are not included with the product and must be purchased separately).
Image 5.1: The Philips Splay LED Outdoor Wall Light providing warm illumination for an outdoor entrance.
6. Maintenance
To ensure the longevity and optimal performance of your Philips Splay LED Outdoor Wall Light, follow these simple maintenance guidelines:
- Cleaning: Regularly clean the exterior of the fixture with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of physical damage, such as cracks in the housing or frayed wiring. If any damage is observed, immediately disconnect power to the fixture and consult a qualified electrician for repair or replacement.
- LEDs: The LEDs in this fixture are integrated and are not designed to be user-replaceable. Do not attempt to open the sealed LED compartment.
7. Troubleshooting
If you encounter issues with your Philips Splay LED Outdoor Wall Light, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power supply to the circuit is active at your main circuit breaker.
- Ensure all electrical connections within the fixture are secure and correctly wired.
- If connected to an external switch or sensor, verify it is in the 'ON' position or functioning correctly.
- Light flickers or dims unexpectedly:
- Check for any loose wiring connections at the fixture or junction box.
- Ensure the voltage supply is stable and within the product's specified range.
- If the issue persists, consult a qualified electrician.
For problems not listed here, please contact Philips Lighting customer support.
8. Specifications
Technical details for the Philips Splay LED Outdoor Wall Light:
| Feature | Specification |
|---|---|
| Brand | Philips Lighting |
| Model Number | 929003188201 |
| Dimensions (L x W x H) | 8 x 16 x 24 cm |
| Weight | 600 g |
| Material | Aluminum |
| Color Temperature | Warm White (2700K) |
| Wattage | 12.0 watts |
| Voltage | 230.0 volts |
| IP Rating | IP44 (Protected from splashing water) |
| Usage | Outdoor (Garden, Patio) |
| Manufacturer | Signify |
Image 8.1: Dimensional diagram of the Philips Splay LED Outdoor Wall Light.
9. Warranty and Support
For detailed warranty information, terms, and conditions, please refer to the official Philips Lighting website or the documentation provided with your purchase. Keep your proof of purchase (receipt or invoice) as it will be required for any warranty claims.
For technical support, product inquiries, or assistance with troubleshooting, please visit the Philips Lighting support page or contact their customer service department through the contact information provided on their official website.
