Introduction
Thank you for choosing the HITSLAM 40x16 Inch Extra Long Clear Non-Slip Bathtub Mat. This product is designed to enhance safety and comfort in your bathtub or shower by providing a secure, non-slip surface. Made from soft PVC material, it features numerous suction cups for strong grip and efficient drainage holes to prevent water buildup. Please read this manual carefully to ensure proper installation, use, and maintenance of your bath mat.

Safety Information
Important Safety Precautions:
- The mat will only attach to clean, smooth surfaces. It is not suitable for textured, tiled, or non-smooth bathtub or shower surfaces.
- Always ensure suction cups are securely attached before each use to prevent slipping.
- Do not use bath oils or similar products while the mat is in use, as this can reduce the mat's grip and increase the risk of slipping.
- Keep out of reach of small children when not in use to prevent choking hazards from small parts.

Setup Instructions
- Clean the Surface: Ensure your bathtub or shower surface is thoroughly clean and free of any soap residue, dirt, or oil. A clean surface is essential for the suction cups to adhere properly.
- Moisten the Tub: Before placing the mat, moisten the tub surface with a small amount of water. This helps create a better seal for the suction cups.
- Position the Mat: Carefully place the HITSLAM bath mat into the tub.
- Secure Suction Cups: Press down firmly on the mat with your hands to secure the suction cups tightly to the smooth bathtub surface. Ensure all suction cups are engaged.
- Verify Stability: Gently pull on the mat to confirm it is firmly in place and does not shift. If it moves, lift, re-moisten the surface, and re-apply pressure.


Operating Instructions
Once the HITSLAM bath mat is securely installed, it provides a stable and comfortable surface for showering or bathing. The textured top surface and pebble design offer enhanced friction and a gentle massage sensation underfoot.


Maintenance
Regular cleaning and proper care will extend the life of your HITSLAM bath mat and maintain its hygienic condition.
- After Each Use: Lift the mat from one corner and peel it back. Rinse the mat thoroughly with water to remove soap residue and hang it up to dry in a ventilated place. This prevents mold and mildew growth.
- Machine Washable: For a deeper clean, the bath mat is conveniently machine washable. Place it in the washing machine with a mild detergent. Do not use bleach. Air dry only; do not tumble dry.


Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mat does not stick to the tub surface. |
|
|
| Mat floats up during bath. |
|
|
| Mold or mildew growth. |
|
|
Specifications
- Brand: HITSLAM
- Model: Bathtub Mat
- Material: Polyvinyl Chloride (PVC)
- Color: Clear
- Dimensions: 40 inches (L) x 16 inches (W) (101cm x 40cm)
- Shape: Rectangular
- Item Weight: Approximately 1.8 pounds (0.82 Kilograms)
- Features: 200 Suction Cups, 176 Drain Holes, Textured Topside, Pebble Design, Machine Washable

Warranty and Support
HITSLAM is committed to providing quality products. For any questions, concerns, or support needs regarding your bath mat, please refer to the seller's contact information on the platform where the product was purchased. Specific warranty details are typically provided at the point of sale or within the product packaging. Please retain your proof of purchase for any warranty claims.





