IKEA 303.587.81
IKEA KUPONG Mini Digital Bedside Basic Alarm Clocks Instruction Manual
Model: 303.587.81 | Brand: IKEA
1. Introduction and Overview
This manual provides comprehensive instructions for setting up, operating, and maintaining your IKEA KUPONG Mini Digital Bedside Basic Alarm Clocks. Designed for simplicity and portability, these clocks are ideal for bedside use or travel, offering a clear digital display and a reliable alarm function.

Image 1.1: Front view of the IKEA KUPONG Mini Digital Alarm Clock, displaying the time 11:30.
2. Package Contents
Your IKEA KUPONG Mini Digital Bedside Basic Alarm Clocks package includes:
- 3 x IKEA KUPONG Mini Digital Alarm Clocks (Light Green)
- This instruction manual
Note: AAA batteries are not included and must be purchased separately. Each clock requires 1 x AAA battery.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the clock.
- Slide the cover downwards to open the compartment.
- Insert 1 x AAA battery, ensuring the correct polarity (+ and - ends match the markings inside the compartment).
- Slide the battery compartment cover back into place until it clicks securely.

Image 3.1: The IKEA KUPONG clock positioned on a shelf, highlighting its compact and space-saving design.
4. Operating Instructions
The IKEA KUPONG alarm clock features a simple interface for ease of use.

Image 4.1: A close-up view of the digital display, showing the time and the 'AL' indicator for the alarm function.
4.1 Setting the Time
- With the clock facing forward, locate the small circular button on the top surface. This is the Time Set button.
- Press and hold the Time Set button until the hour digits begin to flash.
- Use the triangular Up (▲) and Down (▼) buttons (located next to the Time Set button) to adjust the hour.
- Press the Time Set button again to move to the minute digits.
- Use the Up (▲) and Down (▼) buttons to adjust the minutes.
- Press the Time Set button one more time to confirm and exit time setting mode.
4.2 Setting the Alarm
- Locate the small rectangular button on the top surface. This is the Alarm Set button.
- Press and hold the Alarm Set button until the alarm hour digits begin to flash. An "AL" indicator may appear on the display.
- Use the triangular Up (▲) and Down (▼) buttons to adjust the alarm hour.
- Press the Alarm Set button again to move to the alarm minute digits.
- Use the Up (▲) and Down (▼) buttons to adjust the alarm minutes.
- Press the Alarm Set button one more time to confirm and exit alarm setting mode.
- To activate or deactivate the alarm, briefly press the Alarm Set button. The "AL" indicator will appear when the alarm is active and disappear when it is off.
4.3 Snooze Function
When the alarm sounds, press any button on the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-9 minutes, non-adjustable).
4.4 Turning Off the Alarm
To turn off the alarm completely after it sounds (not just snooze), you may need to slide the clock to a different position or press and hold the Alarm Set button until the "AL" indicator disappears. Refer to the specific orientation for alarm off as indicated by the clock's design (e.g., flipping it over).
5. Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the clock to extreme temperatures, direct sunlight, or high humidity.
- If the display becomes dim or the alarm sounds weak, replace the AAA battery.
- Remove the battery if the clock will not be used for an extended period to prevent battery leakage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank or dim. | Battery is dead or incorrectly installed. | Replace the AAA battery, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not activated or set incorrectly. | Ensure the "AL" indicator is visible. Re-set the alarm time. |
| Time is incorrect. | Time was not set correctly or battery was removed. | Re-set the current time following Section 4.1. |
7. Specifications
- Brand: IKEA
- Model: KUPONG (Article Number: 303.587.81)
- Type: Mini Digital Bedside Basic Alarm Clock
- Color: Light Green
- Display Type: Digital
- Dimensions: Approximately 4cm (Width) x 6cm (Height) x 7cm (Length) / 1.57"W x 2.36"H
- Power Source: 1 x AAA Battery (not included)
- Material: Plastic, Rubber
- Special Features: Alarm, Snooze, Portable, Space-saving
8. Warranty and Support
For information regarding warranty, returns, or additional product support, please refer to your purchase receipt or contact IKEA customer service directly. Details can typically be found on the official IKEA website or at your local IKEA store.
Online support: www.ikea.com