Important Safety Instructions
Warning: Failure to observe these instructions can cause product damage, explosion, fire, or electric shocks!
- Do not open or repair this device.
- Do not expose the device to liquids, excessive heat, or extreme cold.
- Clean the device with a soft, dry cloth only.
- Keep the device and all loose parts away from children, pets, and unauthorized persons.
- Only use the device with appropriate provided accessories and cables.
- Do not use the cables in any way other than specified in this guide; avoid bending, cutting, extending, knotting, or stepping on them.
- Do not insert any foreign objects into the device openings.
- If the device is damaged or becomes excessively hot, discontinue use immediately.
- Exercise caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.
- For safety instructions in additional languages, please visit www.speedlink.com.
Product Overview
The Speedlink RAIT Wireless Bluetooth Gamepad is designed for versatile gaming across multiple platforms, including Nintendo Switch, PC, and Android devices. It features a robust, ergonomic design with motion control capabilities for Nintendo Switch, precise input options, and a vibration function for enhanced immersion.
Image: Front view of the Speedlink RAIT Wireless Bluetooth Gamepad, showcasing its ergonomic shape, dual analog sticks, D-pad, action buttons (A, B, X, Y), Home button, and +/- buttons.
The gamepad offers comprehensive control with 10 buttons, 2 triggers, a digital directional pad, and 2 analog sticks. Its rubberized surface ensures a non-slip grip, providing optimal control during intense gaming sessions. The built-in 600 mAh Li-ion battery guarantees extended playtime, and the included USB-C cable allows for convenient charging.
Image: Rear view of the Speedlink RAIT Wireless Bluetooth Gamepad, highlighting the USB-C charging port and the L2/R2 triggers.
Setup and Connection
1. Pairing with Nintendo Switch
- Turn on your Nintendo Switch console.
- From the HOME Menu, select Controllers, then Change Grip/Order.
- On the Speedlink RAIT Gamepad, press and hold the Home button (center button with house icon) for approximately 3-5 seconds until the LEDs begin to flash rapidly.
- Once the gamepad is successfully paired, the corresponding player LED on the gamepad will remain solid.
2. Pairing with PC (Bluetooth)
- Ensure your PC has Bluetooth functionality enabled.
- Navigate to your PC's Bluetooth settings (e.g., Settings > Devices > Bluetooth & other devices).
- Put the gamepad into pairing mode by pressing and holding the Home button until the LEDs flash rapidly.
- Select "Speedlink RAIT" from the list of available Bluetooth devices on your PC to complete the pairing process.
3. Pairing with Android Devices
- Enable Bluetooth on your Android smartphone or tablet.
- Go to your device's Bluetooth settings.
- Put the gamepad into pairing mode by pressing and holding the Home button until the LEDs flash rapidly.
- Select "Speedlink RAIT" from the list of available Bluetooth devices on your Android device to establish the connection.
Image: Angled view of the Speedlink RAIT Wireless Bluetooth Gamepad, emphasizing its wireless Bluetooth connectivity and compatibility with Nintendo Switch, PC, and Android.
Operating the Gamepad
Button Layout and Functions
| Button | Function |
|---|---|
| A, B, X, Y Buttons | Standard action buttons for in-game commands. |
| D-Pad (Directional Pad) | Digital input for directional movement or menu navigation. |
| Left/Right Analog Sticks | Analog input for precise movement and camera control. |
| L1/R1 (Shoulder Buttons) | Top shoulder buttons for various in-game actions. |
| L2/R2 (Triggers) | Analog triggers for pressure-sensitive actions (e.g., acceleration, aiming). |
| Home Button | Returns to the system's home menu; also used for pairing. |
| + (Plus) Button | Typically used for Start/Pause or menu access. |
| - (Minus) Button | Typically used for Select/View or menu access. |
| MODE Button | Switches between different operating modes (if applicable, consult game/system for details). |
| RAPID Button | Activates/deactivates turbo (rapid fire) function for other buttons. |
Motion Control Sensor
The built-in motion control sensor is active when the gamepad is connected to a Nintendo Switch console. This feature allows you to control compatible games directly through the physical movements of the gamepad, enhancing the interactive gaming experience.
Vibration Function
The gamepad features a vibration function that provides tactile feedback during gameplay. This intensifies the gaming experience by making critical in-game moments directly felt through the controller.
Rapid Fire (Turbo) Function
To activate the rapid fire function for a specific button, press and hold the RAPID button, then press the desired action button (e.g., A, B, X, Y, L1, R1, L2, R2). The selected button will now continuously register input as long as it is held down. To deactivate rapid fire for that button, repeat the same process.
Charging the Gamepad
The Speedlink RAIT Gamepad is equipped with a 600 mAh Li-ion battery, providing extended gameplay hours. When the battery level is low, the gamepad's indicator light will signal this condition (e.g., blinking slowly).
- Locate the USB-C charging port on the top edge of the gamepad.
- Connect the included 1-meter USB-C charging cable to the gamepad's USB-C port.
- Connect the other end of the USB-C cable to a suitable USB power source, such as a PC's USB port, a USB wall adapter, or a power bank.
- During charging, the LED indicator on the gamepad will typically blink. Once fully charged, the LED indicator will usually turn solid or switch off, depending on the specific model's behavior.
- A full charge provides hours of uninterrupted gameplay. Disconnect the charging cable once the battery is full to prolong battery life.
Maintenance and Care
- Cleaning: Regularly clean the gamepad with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface and internal components.
- Storage: Store the gamepad in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid placing heavy objects on top of the gamepad.
- Handling: Avoid dropping the gamepad or subjecting it to strong impacts, which can cause internal damage.
- Battery Care: For optimal battery longevity, avoid completely draining the battery frequently. If storing for an extended period, charge the battery to approximately 50% before storage.
Troubleshooting
Gamepad Not Connecting/Pairing
- Ensure the gamepad is sufficiently charged.
- Verify that Bluetooth is enabled on your Nintendo Switch, PC, or Android device.
- Try re-pairing the gamepad by following the setup instructions for your specific device.
- Restart your host device (Switch, PC, or Android) and attempt pairing again.
- Ensure no other Bluetooth devices are interfering with the connection.
Buttons or Analog Sticks Not Responding
- Check if the gamepad is properly connected to your device.
- Ensure the gamepad battery is not critically low.
- Test the gamepad in another game or application to determine if the issue is game-specific.
- If possible, try updating the firmware of your host device (e.g., Nintendo Switch system software).
Vibration Function Not Working
- Verify that the game you are playing supports vibration feedback.
- Check the in-game settings or system settings to ensure vibration is enabled.
Short Battery Life
- Ensure the gamepad is fully charged before use.
- Battery performance may naturally decrease over time with repeated charging cycles.
- Reduce vibration intensity in games if possible, as this can consume more power.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SL-330402-RRBK |
| Compatibility | Nintendo Switch, PC, Android |
| Connectivity | Bluetooth Wireless |
| Battery Type | 600 mAh Li-ion (Lithium Ion) |
| Charging Port | USB-C |
| Dimensions (W x D x H) | 147 x 105 x 67 mm (5.79 x 4.13 x 2.64 inches) |
| Weight | 205 grams (7.23 ounces) / 12.3 ounces (product spec) |
| Controls | 10 buttons, 2 triggers, digital directional pad, 2 analog sticks |
| Special Features | Motion control sensor (Nintendo Switch only), Vibration function, Rapid fire function |
Warranty and Support
For detailed warranty information, technical support, and frequently asked questions, please visit the official Speedlink website. You can find the most up-to-date resources and contact information there.
Official Website: www.speedlink.com
Conformity Notice
Importer/Manufacturer: ZEICHNER Media GmbH, Im Dorf 5, 27424 Hesedorf, Deutschland
Product Number: SL-330402-RRBK
Type Description: RAIT Bluetooth Gamepad for Nintendo Switch, rubber-black
The product complies with the following directives:
- RED: 2014/53/EU
- RoHS: 2011/65/EU
For a full declaration of conformity, the latest user guide, FAQ, or further information, please visit www.speedlink.com.
RF Frequency Range: 2402MHz - 2480MHz
RF Power Transmission: < 8dBm
Image: Packaging of the Speedlink RAIT Gamepad, displaying regulatory marks, product details, and conformity notices.
