Auris Blume Pro
Auris Blume Pro
HiFi Bluetooth Music Receiver Instruction Manual
Introduction
The Auris Blume Pro is a premium HiFi Bluetooth audio adapter engineered to bring high-definition wireless audio streaming to your existing home stereo system, AV receiver, or powered speakers. It integrates advanced audio technologies to deliver exceptional sound quality and a seamless user experience.
The Auris Blume Pro, a compact and powerful Bluetooth music receiver.
Package Contents
Ensure all items are present in the box:
- Auris Blume Pro Unit
- 2RCA to 2RCA Stereo Audio Cable
- 3.5mm to 2RCA Splitter Cable
- 100-240V USB Power Adapter
- USB to USB-C Power Cable
- Self-adhesive Feet Bumpers x 4
Setup Guide
Follow these steps to connect your Auris Blume Pro to your audio system:
- Power Connection: Connect the provided USB-C power cable to the DC 5V input on the back of the Blume Pro and plug the USB power adapter into a wall outlet.
- Audio Connection: Choose one of the following methods to connect the Blume Pro to your audio system (AV receiver, amplifier, or powered speakers):
- Analog RCA Output: Use the supplied 2RCA to 2RCA stereo audio cable to connect the 'ANALOG OUT' ports on the Blume Pro to the corresponding RCA input ports on your audio system.
- Digital Coaxial Output: Use a coaxial cable (not included) to connect the 'COAXIAL OUT' port on the Blume Pro to the coaxial input on your audio system.
- Digital Optical Output: Use an optical TOSLINK cable (not included) to connect the 'OPTICAL OUT' port on the Blume Pro to the optical input on your audio system.
- Bluetooth Pairing: Once powered on, the Blume Pro's OLED display will show its status. On your smartphone, tablet, or computer, go to Bluetooth settings and select 'bluMe Pro' from the list of available devices to pair.
Rear panel connections of the Auris Blume Pro, showing analog, coaxial, and optical outputs.
The Blume Pro seamlessly integrates with traditional Hi-Fi stereo systems.
Official Setup Video
Watch this official video for a visual guide on setting up and using the Blume Pro.
Operating Instructions
The Auris Blume Pro is designed for intuitive operation:
- OLED Display: The 1.3-inch OLED screen provides real-time information including Bluetooth connection status, active audio codec (e.g., LDAC, aptX HD, AAC), sampling rate, and song name. This allows for quick verification of audio quality and connection.
- High-Resolution Audio: The Blume Pro supports advanced audio codecs such as LDAC, aptX Adaptive, aptX HD, aptX Low Latency, aptX, and AAC. For the best audio quality, ensure your source device also supports these codecs, especially LDAC for Hi-Res wireless audio.
- Extended Wireless Range: The precision-tuned external high-gain antenna extends the wireless range up to 30 meters (100+ feet), providing stable and glitch-free performance even through multiple walls.
The OLED display provides essential audio information at a glance.
Experience immersive wireless audio with advanced Bluetooth technology.
The external antenna ensures freedom from dropouts and reliable connectivity.
Maintenance
To ensure the longevity and optimal performance of your Auris Blume Pro, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or strong chemicals, as they may damage the finish or internal components.
- Placement: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the device.
- Handling: Handle the unit with care. Avoid dropping it or subjecting it to strong impacts.
- Antenna: Ensure the external antenna is securely attached and positioned for optimal signal reception.
Troubleshooting
If you encounter issues with your Auris Blume Pro, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/OLED display off | Power cable not connected or faulty outlet. | Ensure the USB-C power cable is securely connected to the unit and the power adapter. Try a different power outlet. |
| No sound output | Incorrect audio cable connection or input selection on receiver. | Verify audio cables are correctly connected to the Blume Pro and your audio system. Ensure your audio system's input is set to the correct source (e.g., AUX, Optical, Coaxial). |
| Bluetooth connection unstable or drops | Distance from source device, obstacles, or interference. | Reduce the distance between the Blume Pro and your source device. Remove obstacles. Avoid placing near Wi-Fi routers or other strong signal sources. Ensure the antenna is upright. |
| Poor sound quality (e.g., static, distortion) | Low-quality audio source, interference, or incompatible codec. | Ensure your audio source is high quality. Check for interference from other electronic devices. Verify your source device is using a high-quality codec like LDAC or aptX HD. |
| Device not appearing in Bluetooth list | Blume Pro not in pairing mode or already connected. | Ensure the Blume Pro is powered on. If already connected to another device, disconnect it. Restart both the Blume Pro and your source device. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 65c55430-6401-42c3-b9d8-d6465d5f15d5 |
| Product Dimensions | 4.37 x 2.95 x 1.34 inches |
| Item Weight | 8.5 ounces |
| Color | Black |
| Connectivity Technology | Bluetooth 5.3 |
| Supported Audio Codecs | LDAC, aptX Adaptive, aptX HD, aptX Low Latency, aptX, AAC |
| DAC | ESS Sabre 32-bit/384kHz |
| Digital Audio Conversion Chip | Cirrus Logic |
| Audio Output Mode | Stereo |
| Connector Type | RCA, Coaxial, Optical |
| Wireless Range | Up to 30 meters / 100+ feet |
| Display | 1.3-inch OLED screen |
| Manufacturer | Auris, Inc. |
| Country of Origin | China |
Warranty and Support
Auris products are designed for reliability and performance. For specific warranty details and technical support, please refer to the warranty card included with your product or visit the official Auris website. Keep your proof of purchase for any warranty claims.
Related documentsBlume Pro
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.