IMALENT LD10 Keychain Flashlight User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation of your IMALENT LD10 Keychain Flashlight. Please read this manual thoroughly before using the product and retain it for future reference.

The IMALENT LD10 Keychain Flashlight, shown with its included diffuser and various usage scenarios, highlighting its compact size and versatility.

Product Features

• Utilizes a Cree XPL HI LED with a 50,000-hour lifespan.
• Maximum output of 1200 lumens.
• Integrated 18350 rechargeable battery.
• Magnetic charging port for convenience and enhanced water resistance.
• Compact and lightweight design.
• OLED display for real-time information.
• IPX8 waterproof rating.

A detailed view of the Cree XPL HI LED emitter, which provides the flashlight's illumination.

Setup

Charging the Battery

The IMALENT LD10 features a built-in rechargeable battery and a magnetic charging system. Ensure the flashlight is fully charged before first use.

1. Connect the provided USB magnetic charging cable to a standard USB power source (e.g., wall adapter, computer USB port).
2. Attach the magnetic end of the charging cable to the magnetic charging port located on the flashlight's tail cap. The magnetic connection will secure the cable in place.
3. The OLED display will indicate charging status. A full charge typically takes approximately 1 hour for the 850mAh battery.

Illustration of the magnetic charging cable and how it connects to the flashlight for recharging.

Operating Instructions

Basic Operation

• Turn On/Off: Press the power switch button once to turn the flashlight on or off.
• Mode Cycling: When the flashlight is on, press and hold the power switch button to cycle through the general modes: 10 lumens (Low) → 150 lumens (Middle Low) → 500 lumens (Middle) → 800 lumens (High). Release the button to select the desired mode.
• Turbo Mode (1200 Lumens): From any mode, double-press the power switch button rapidly to activate Turbo mode (1200 lumens). Double-press again to return to the previously used general mode.
• Strobe Mode: From any mode, triple-press the power switch button rapidly to activate Strobe mode. Press once to exit Strobe mode.
• Lockout Function: To prevent accidental activation, press and hold the power switch button for approximately 3 seconds when the flashlight is off. The OLED display will show a lock icon. To unlock, press and hold the button again for 3 seconds.

OLED Display

The integrated OLED display provides real-time information, including:

• Current lumen output.
• Battery voltage.
• Charging status (when connected to charger).

The IMALENT LD10 flashlight held in a hand, demonstrating its compact, thumb-sized form factor.

Maintenance

• Cleaning: Use a soft, damp cloth to clean the flashlight body. Do not use abrasive cleaners or solvents.
• Water Resistance: The LD10 is rated IPX8 waterproof, meaning it can be submerged up to 2 meters. Ensure the magnetic charging port is clean and free of debris to maintain water resistance during use.
• Battery Care: The built-in battery is not user-replaceable. To prolong battery life, avoid fully discharging the flashlight frequently. Recharge promptly when the battery indicator shows low power.
• Storage: Store the flashlight in a cool, dry place when not in use for extended periods. Recharge every 3-6 months to maintain battery health.

Troubleshooting

• Flashlight not turning on:
  • Ensure the battery is charged.
  • Check if the lockout function is activated. Deactivate by pressing and holding the button for 3 seconds.
• Charging issues:
  • Verify the USB cable is securely connected to both the power source and the flashlight's magnetic port.
  • Ensure the magnetic charging contacts on the flashlight and cable are clean and free of debris.
  • Try a different USB power source or cable.
• Inconsistent mode changes:
  • Practice the button press sequences for mode cycling, Turbo, and Strobe. Ensure presses are distinct and rapid for multi-press functions.

Specifications

A visual representation of the IMALENT LD10's key performance specifications, including output levels and runtimes.

Warranty and Support

IMALENT products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official IMALENT website or contact your local distributor. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the IMALENT Store on Amazon.

Package Contents

The IMALENT LD10 package typically includes:

• IMALENT LD10 Flashlight
• USB Magnetic Charging Cable
• Diffuser
• Lanyard
• User Manual (this document)

The complete contents of the IMALENT LD10 product package, including the flashlight and accessories.