HOTONE AMPEROIISTOMP
Hotone Ampero II Stomp User Manual
Comprehensive Guide for Your Modeler & Effects Processor
Introduction
The Hotone Ampero II Stomp is a powerful and versatile amplifier and effects modeler designed for guitarists and bassists. It features a triple-core DSP platform, ESS Sabre AD/DA conversion, and advanced CDCM HD & F.I.R.E. modeling technology to deliver high-quality, organic tones. This manual provides detailed instructions on setting up, operating, and maintaining your Ampero II Stomp.
Setup
Initial Setup
Before using your Ampero II Stomp, ensure it is placed on a stable surface and all connections are secure. Always power on your Ampero II Stomp after connecting all audio cables and power supply.
Connecting Power
Connect the included 18V DC power adapter to the 'POWER' input on the rear panel of the Ampero II Stomp. Ensure the power switch is in the 'OFF' position before connecting, then switch to 'ON' to power the unit.
Audio Connections
The Ampero II Stomp offers various audio input and output options:
- Input: Connect your instrument (guitar, bass, etc.) to the L (MONO) or R input jacks.
- Balanced Output: Use the L (MONO) and R balanced XLR outputs to connect to a mixer, audio interface, or PA system.
- Unbalanced Output: Use the L (MONO) and R unbalanced 1/4" outputs for connecting to an amplifier or other audio equipment.
- EXP/CTRL: Connect an external expression pedal or footswitch for additional control.
- AUX In: Connect an external audio source (e.g., MP3 player) for practice.
- Headphone Out: Connect headphones for silent practice.
USB Connection
Connect the Ampero II Stomp to your computer via the USB port. This allows for firmware updates, direct recording (8-in/8-out audio interface), and use with the dedicated editing software for patch management and detailed effect parameter adjustments.
MIDI Connection
The Ampero II Stomp supports MIDI input and output, allowing integration with other MIDI-compatible devices for advanced control and synchronization.
Operating
User Interface
The Ampero II Stomp features an 800 x 480 pixel touch-sensitive screen for intuitive navigation and parameter editing. The three footswitches control patch switching and other assigned functions.
Navigating Menus
Use the touch screen to select and adjust parameters. The 'MENU/VALUE' knob can be used for fine-tuning values and navigating menus as an alternative to touch input.
Patch Management
The unit allows for storing and recalling numerous patches. Patches can be edited directly on the device or via the computer editing software. The Ampero II Stomp supports up to 300 patches in groups of 3 with the firmware 2.0 update, including SCENES functionality.
Effects and Amp Modeling
The Ampero II Stomp offers 87 amplifier emulations (including classic British, American, and bass amps) and 68 cabinet simulations (including 20 Celestion IRs). It features 186 effects across 25 types, including overdrive/distortion, delay, reverb, compressor, boost, filter, wah, and pitch effects. Up to 12 effect modules can be used simultaneously in a dual-effect chain, supporting both serial and parallel signal paths.
Looper Functionality
An integrated stereo looper supports up to 60 seconds of stereo recording. Features include undo/redo, 1/2 speed playback, and reverse recording/playback.
Maintenance
Care and Cleaning
To ensure the longevity of your Ampero II Stomp, follow these guidelines:
- Clean the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.
- Do not block ventilation openings.
- Protect the screen from scratches and impacts.
Storage
When not in use for extended periods, store the Ampero II Stomp in a cool, dry place, preferably in its original packaging or a protective case.
Troubleshooting
Common Issues and Solutions
| Problem | Solution |
|---|---|
| No power | Ensure the power adapter is correctly connected and the power switch is ON. Verify the power outlet is functional. |
| No sound output | Check all audio cable connections. Verify input and output levels on the Ampero II Stomp and connected devices. Ensure the master volume is not at zero. |
| Distorted sound | Check input gain levels to prevent clipping. Adjust output levels to match the connected amplifier or device. |
| Touch screen unresponsive | Restart the unit. Ensure the screen is clean and free of debris. If the issue persists, contact customer support. |
| USB connection issues | Ensure the USB cable is securely connected. Try a different USB port or cable. Install the latest drivers if necessary. |
Specifications
Technical Specifications
| Feature | Detail |
|---|---|
| Model Number | AMPEROIISTOMP |
| Dimensions | 18.5 x 14.5 x 5.8 cm |
| Weight | 476 grams |
| Power Supply | 18V DC, 800mA (100 watts) |
| Audio Resolution | 24-bit |
| Dynamic Range | Up to 127 dB |
| Display | 800 x 480 pixel touch-sensitive screen |
| USB Interface | 8-in/8-out Audio Interface |
| IR Sample Points | Up to 2048 |
| Amp Models | Over 87 |
| Cabinet Simulations | 68 (including 20 Celestion IRs) |
| Effects Types | 186 effects, 25 types |
| Looper Recording Time | Up to 60 seconds (stereo) |
Warranty and Support
Warranty Information
Please refer to the warranty card included with your product for detailed warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Hotone website or contact their customer support team. Contact information can typically be found on the Hotone website or product packaging.
Related documentsAMPEROIISTOMP
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.