Introduction
Thank you for choosing the OttLite LED Desk Lamp. This manual provides important information regarding the setup, operation, and maintenance of your new lamp. Please read it thoroughly before use and retain it for future reference.
This executive desk lamp features an adjustable arm, multiple color temperatures, and five brightness settings, making it suitable for various environments. It is designed to reduce glare and eye strain. Additionally, it includes a USB charging port and Qi wireless charging capabilities to power your compatible devices.
The integrated digital LCD display provides convenient access to the date, time, a snooze alarm, and ambient temperature readings.
Safety Information
- For indoor use only.
- Do not expose the lamp to water or excessive humidity.
- Do not attempt to disassemble or modify the lamp. This will void the warranty.
- Use only the provided power adapter.
- Keep the lamp away from heat sources and direct sunlight.
- Ensure the lamp is placed on a stable, flat surface.
Recycling and Disposal
Information regarding the recycling of light bulbs and electronic devices can be found through local municipal guidelines. Please dispose of the product responsibly at the end of its life cycle.
Cleaning
To clean the lamp, ensure it is unplugged from the power source. Use a soft, dry cloth to wipe surfaces. Do not use abrasive cleaners or solvents, as these may damage the finish.
Product Overview
Figure 1: OttLite LED Desk Lamp. This image shows the lamp in its upright position, highlighting the LED panel, adjustable arm, control panel with LCD display, and the base with a phone placed on it, indicating wireless charging. Another view shows the lamp folded down, and a third view shows it in a typical desk setup with a monitor and other accessories.
Key Components:
- LED Light Panel: Provides illumination.
- Adjustable Arm: Allows for positioning the light.
- Control Panel: Touch-sensitive buttons for lamp functions.
- Digital LCD Display: Shows time, date, temperature, and alarm status.
- USB Charging Port (5V, 2.1A): Located on the side or rear of the base for wired charging.
- Qi Wireless Charging Base: Integrated into the lamp base for compatible devices.
- Power Input Port: For connecting the power adapter.
Setup
- Unpack: Carefully remove all components from the packaging.
- Position the Lamp: Place the lamp on a stable, flat surface.
- Connect Power: Insert the power adapter into the power input port on the lamp base, then plug the adapter into a standard electrical outlet.
- Adjust Lamp Arm: Gently adjust the lamp arm and head to your desired position. The lamp is designed with articulated joints for a range of lighting options.
Operating Instructions
Lamp Operation:
- Power On/Off: Touch the Power button on the control panel to turn the lamp on or off.
- Brightness Adjustment: With the lamp on, repeatedly touch the Brightness button (often indicated by a sun icon or +/-) to cycle through the 5 levels of brightness.
- Color Mode Selection: Touch the Mode button (often indicated by a color temperature icon) to switch between the 3 LED color modes:
- Warm White (2700K)
- Bright White (4000K)
- Natural Daylight (5000K)
Digital LCD Display Settings:
The LCD display shows the date, time, and ambient temperature. It also features a snooze alarm function.
- Setting Time/Date: Refer to the specific buttons near the LCD display (usually "SET", "UP", "DOWN" or similar). Press "SET" to enter setting mode, then use "UP" and "DOWN" to adjust values. Press "SET" again to confirm and move to the next setting (e.g., hour, minute, year, month, day).
- Alarm Function: Use the "MODE" or "ALARM" button to access alarm settings. Set the desired alarm time and activate the alarm. The snooze function can typically be activated by touching any button when the alarm sounds.
- 12/24 Hour Format: The clock display supports both 12-hour and 24-hour formats. This setting can usually be toggled within the time setting menu.
Charging Functions:
- USB Charging Port: Connect your device's USB charging cable to the USB port (5V, 2.1A) on the lamp base. This port is suitable for charging smartphones, tablets, and other USB-powered devices.
- Qi Wireless Charging: Place your Qi-compatible device (e.g., smartphone) directly onto the designated wireless charging area on the lamp base. Ensure the device is centered for optimal charging. Charging power is up to 5W, depending on the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; power adapter faulty; lamp faulty. | Ensure power adapter is securely plugged into the lamp and wall outlet. Try a different outlet. If problem persists, contact support. |
| Wireless charging not working. | Device not Qi-compatible; device not properly aligned; foreign objects on charging pad. | Verify your device supports Qi wireless charging. Reposition the device on the charging pad. Remove any metal objects or thick cases. |
| USB charging not working. | Cable faulty; device not compatible; lamp not powered. | Try a different USB cable. Ensure the lamp is powered on. |
| LCD display is blank or incorrect. | Power interruption; settings reset. | Unplug and re-plug the lamp. Re-set the time and date as per operating instructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 286861 |
| Dimensions (Product) | 4.33 x 4.33 x 19.02 cm (1.7 x 1.7 x 7.5 inches) |
| Adjustable Height | 22.2 cm to 58.4 cm (8.75 to 23 inches) |
| Base Dimensions | 14 x 18.3 cm (5.5 x 7.2 inches) |
| Weight | 948 Grams (2.09 lbs) |
| Lamp Type | LED |
| Brightness Levels | 5 |
| Color Modes | 3 (2700K Warm White, 4000K Bright White, 5000K Natural Daylight) |
| Switch Type | Touch |
| Base Material | Aluminum |
| USB Port Output | 5V, 2.1A |
| Wireless Charging Output | Up to 5W (Qi compatible) |
| LCD Display Features | Date, Time (12/24 hr), Snooze Alarm, Ambient Temperature |
Warranty and Support
OttLite products are manufactured to high-quality standards. For information regarding warranty coverage and customer support, please refer to the warranty card included with your product or visit the official OttLite website.
If you encounter any issues not covered in this manual, or require further assistance, please contact OttLite customer service.
Note: Warranty terms and conditions may vary by region.
