1. Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold flat-panel TVs and monitors ranging from 23 to 55 inches, with VESA compatibility up to 400x400mm.
Image 1.1: Overview of the Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount.
2. Safety Information
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. Mount Plus is not liable for damage or injury caused by incorrect assembly or use.
- Ensure the mounting surface can safely support the combined weight of the mount and the display.
- Do not exceed the maximum weight capacity of 44 lbs (20 kg).
- This product is intended for indoor use only.
- Use only the provided hardware. If any parts are missing or damaged, contact Mount Plus for replacement.
- Always use a qualified professional for installation if you are unsure about the process.
- Keep children and pets away during installation.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list below:
- Ceiling Plate Assembly
- Mounting Arm
- VESA TV Brackets (x2)
- Hardware Kit (screws, washers, spacers, anchors)
- Instruction Manual
4. Specifications
| Feature | Specification |
|---|---|
| Model | CM344 |
| Screen Size Compatibility | 23" - 55" |
| VESA Compatibility | 100x100mm, 200x100mm, 200x200mm, 400x400mm |
| Weight Capacity | 44 lbs (20 kg) |
| Tilt Angle | -80° to 0° (Fold-up mechanism) |
| Swivel Angle | ±45° |
| Height Adjustment | Min 20.5" to Max 24.2" (approx. 4 inches) |
| Material | Alloy Steel, Aluminum |
| Color | Black |
Image 4.1: Detailed dimensions of the Mount Plus CM344.
5. Installation Instructions
Before starting, ensure you have the necessary tools: drill, stud finder, level, screwdriver, and a pencil. It is recommended to have a second person assist with installation.
5.1. Determine Mounting Location
Locate a suitable ceiling joist or solid concrete area. Use a stud finder to confirm the location of wooden studs. For concrete ceilings, ensure the concrete is solid and thick enough for anchors.
5.2. Install Ceiling Plate
- Position the ceiling plate (part of the main assembly) against the ceiling at your desired location.
- Mark the drill holes through the plate onto the ceiling using a pencil.
- Drill pilot holes. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
- Secure the ceiling plate using the provided lag bolts and washers. Ensure it is firmly attached and level.
Image 5.1: Close-up of the ceiling plate with its integrated swivel mechanism.
5.3. Attach VESA Brackets to TV/Monitor
- Lay your TV or monitor face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your display.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
- Attach the two VESA TV brackets to the back of your display. Ensure they are securely fastened but do not overtighten.
5.4. Mount TV/Monitor to Arm Assembly
- With assistance, carefully lift the TV/monitor with the attached VESA brackets.
- Hook the VESA brackets onto the mounting arm of the ceiling assembly. Ensure both brackets are properly seated.
- Secure the TV/monitor to the arm assembly using the provided safety screws or locking mechanisms to prevent accidental dislodgement.
Image 5.2: Illustration of the mount assembly and TV attachment.
6. Operating Instructions
6.1. Folding Up and Down
The mount allows the display to fold up against the ceiling for storage or to save space, and fold down for viewing.
- To Fold Up: Gently push the bottom of the display upwards until it clicks into the locked position against the ceiling plate.
- To Fold Down: Pull the release mechanism (often a small lever or tab) to unlock the display, then carefully lower it to the desired viewing angle.
Image 6.1: Diagram illustrating the push-to-lock and pull-to-unlock mechanism.
Image 6.2: Side view demonstrating the tilt range of the mount.
6.2. Swivel Adjustment
The mount features a ±45° swivel function to optimize viewing angles.
- Gently rotate the display left or right to achieve your preferred viewing position.
Image 6.3: Front and side view illustrating the swivel capability.
6.3. Height Adjustment
The vertical rail allows for approximately 4 inches of height adjustment.
- Loosen the adjustment screws on the vertical rail.
- Slide the display up or down to the desired height.
- Tighten the adjustment screws firmly to secure the height.
Image 6.4: Side view demonstrating the adjustable vertical rail for height customization.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your mount.
- Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Inspect moving parts for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
8. Troubleshooting
If you encounter issues with your Mount Plus CM344, refer to the following common problems and solutions:
- Problem: TV does not fold up or down smoothly.
Solution: Check for any obstructions. Ensure the locking mechanism is not jammed. Apply a small amount of silicone-based lubricant to moving parts if friction is excessive. - Problem: TV appears unstable or sags.
Solution: Verify that all mounting bolts to the ceiling and VESA screws to the TV are securely tightened. Ensure the TV's weight does not exceed the 44 lbs capacity. - Problem: Difficulty adjusting height or swivel.
Solution: Loosen the relevant adjustment screws slightly before attempting to reposition. Ensure no cables are interfering with movement.
9. Warranty and Support
The Mount Plus CM344 Flip Down TV and Monitor Ceiling Mount comes with a 2-YEAR WARRANTY from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
For warranty claims, technical support, or replacement parts, please contact Mount Plus customer service. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official Mount Plus website or contact their support channels.
