Empava 59-inch Freestanding Whirlpool Bathtub User Manual

1. Introduction

Thank you for choosing the Empava 59-inch Freestanding Whirlpool Bathtub. This manual provides essential information for the safe installation, operation, and maintenance of your new bathtub. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

Image 1.1: The Empava 59-inch Freestanding Whirlpool Bathtub, showcasing its design and active hydromassage jets.

2. Safety Information

WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Always ensure the bathtub is properly grounded.
• Do not operate the whirlpool system without sufficient water in the tub.
• Avoid using electrical appliances near the bathtub.
• Do not use harsh chemicals or abrasive cleaners that could damage the acrylic surface or internal components.
• Consult a qualified electrician and plumber for installation to ensure compliance with local codes and safety standards.
• The water temperature should not exceed 104°F (40°C) to avoid hyperthermia.

3. Product Features and Components

The Empava Freestanding Whirlpool Bathtub is designed for a comfortable and relaxing bathing experience. Key features include:

• Spacious Dimensions: 59.06"L x 29.53"W x 23.62"H, with a soaking depth of 14.56".
• 8 Hydromassage Jets: Adjustable nozzles to target specific muscle groups.
• Easy-to-Use Controls: Integrated control switch for hydro massage activation and water pressure adjustment.
• Integrated Faucet and Handheld Shower: Pre-installed for convenience.
• Waterproof Pillows: For enhanced comfort.
• Durable Construction: High-quality acrylic reinforced with fiberglass resin, supported by a 304 stainless steel frame.
• ETL Certified: Ensures safety and performance standards are met.

Image 3.1: Top-down view highlighting the placement of the 8 hydromassage jets within the bathtub.

Image 3.2: Detail of an active hydromassage jet, showing water flow.

Image 3.3: Close-up of the pre-installed faucet, handheld shower, and comfortable pillow rest.

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your bathtub. It is recommended that installation be performed by a licensed professional.

4.1 Pre-Installation Checks

• Verify all components are present and undamaged.
• Ensure the installation area has adequate structural support for the filled bathtub and user weight.
• Confirm access to hot and cold water lines, a drain connection, and a dedicated electrical circuit.

4.2 Placement

Position the freestanding bathtub in its desired location, ensuring sufficient clearance for maintenance and cleaning. The flat back design allows for seamless placement against a wall.

4.3 Plumbing Connections

• Connect the hot and cold water supply lines to the pre-installed faucet inlets.
• Connect the bathtub drain to the floor drain system. Ensure all connections are watertight.

4.4 Electrical Connections

• The bathtub requires a dedicated electrical circuit. Connect the power plug to a properly grounded GFCI (Ground-Fault Circuit Interrupter) protected outlet.
• All electrical work must comply with local electrical codes.

4.5 Testing

After installation, fill the tub with water and operate the whirlpool system to check for leaks and proper functionality of all jets and controls. Drain the tub completely.

5. Operating Instructions

5.1 Filling the Bathtub

Turn on the hot and cold water faucets to fill the bathtub to the desired level. Ensure the water level is above the highest jets before activating the whirlpool system.

5.2 Activating Whirlpool Jets

Press the built-in control switch to activate the hydro massage function. The jets will begin to circulate water, providing a massaging effect.

5.3 Adjusting Jet Intensity and Direction

To adjust the water pressure, twist the control knob clockwise or counter-clockwise. The direction of individual jets can be modified by turning the nozzle up, down, left, or right.

5.4 Using the Handheld Shower

The pull-out handheld shower can be used for rinsing or targeted washing. Refer to the faucet controls for diverting water flow to the handheld shower.

5.5 Draining the Bathtub

After use, open the centrally located drain to empty the bathtub. Ensure all water is drained to prevent stagnation.

6. Care and Maintenance

Regular cleaning and maintenance will prolong the life and appearance of your bathtub.

6.1 General Cleaning

• Clean the acrylic surface with a soft cloth and a mild, non-abrasive cleaner.
• Rinse thoroughly with clean water after cleaning.
• Avoid using abrasive pads, steel wool, or harsh chemical cleaners (e.g., acetone, ammonia-based products) as they can damage the finish.

6.2 Jet System Cleaning

Periodically clean the whirlpool system to prevent buildup of soap scum or bacteria.

1. Fill the tub with warm water to a level above the jets.
2. Add 2-3 tablespoons of dishwasher detergent or a specialized jet cleaner.
3. Run the whirlpool system for 10-15 minutes.
4. Drain the tub and refill with clean water.
5. Run the jets with clean water for another 5 minutes to rinse the system.
6. Drain the tub completely.

7. Troubleshooting

This section addresses common issues you might encounter with your Empava whirlpool bathtub.

8. Specifications

Detailed technical specifications for the Empava 59-inch Freestanding Whirlpool Bathtub.

• Model: AIS06
• Dimensions (L x W x H): 59.06" x 29.53" x 23.62"
• Internal Dimensions (L x W x H): 37.4" x 21.27" x 17.72"
• Soaking Depth: 14.56"
• Material: Acrylic, Stainless Steel
• Color: Pure White
• Installation Type: Freestanding
• Capacity: 60 Gallons
• Item Weight: 119 Pounds
• Jets: 8 Hydromassage Jets
• Certifications: ETL Certified

8.1 Dimension Diagrams

Image 8.1: Top view diagram with key dimensions and component labels (e.g., water jet, drainer, overflow).

Image 8.2: Front view diagram illustrating height and width dimensions.

Image 8.3: Side view diagram illustrating length and height dimensions.

9. Warranty and Customer Support

This Empava Freestanding Whirlpool Bathtub comes with a 2-year manufacturer warranty.

For warranty claims, technical assistance, or any questions regarding your product, please contact Empava customer support. Refer to the product packaging or the official Empava website for the most current contact information.