Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the AZH Ice Maker Replacement, model 596.723824102. This component is designed to replace the original ice maker in various Kenmore, KitchenAid, Maytag, and Whirlpool refrigerator models. Please read this manual thoroughly before beginning installation to ensure proper function and safety.
Compatible Refrigerator Models
This ice maker replacement is compatible with a range of refrigerator models. Please verify your refrigerator's model number against the list below to confirm compatibility.
- Kenmore: 596.723824102, 596.72382411, 596.723834102, 596.72383411, 596.72383412, 596.72389411, 596.72389412
- Ikea: IX7DDEXDSM00, IX7DDEXDSM01
- Jenn-Air: JFX2897DRM00, JFX2897DRM01, JFX2897DRP00, JFX2897DRP01
- KitchenAid: KFIS29BBBL00, KFIS29BBBL01, KFIS29BBBL02, KFIS29BBBL03, KFIS29BBMS00, KFIS29BBMS01, KFIS29BBMS02, KFIS29BBMS03, KFIS29BBWH00, KFIS29BBWH01, KFIS29BBWH02, KFIS29BBWH03, KFIS29PBMS00, KFIS29PBMS01, KFIS29PBMS02, KFIS29PBMS03, KFIV29PCMS00, KFIV29PCMS01, KFIV29PCMS02, KFIV29PCMS03, KRFF507EBL00, KRFF507ESS00, KRFF507EWH00, KRFF707ESS00, KRMF606ESS00, KRMF706EBS00, KRMF706ESS00
- Maytag: 7MF2976AEM00, 7MF2976AEM01, 7MF2976AEM02, 7MF2976AEM03, MFT2574DEE00, MFT2574DEE01, MFT2574DEH00, MFT2574DEH01, MFT2574DEM00, MFT2574DEM01, MFT2672AEB10, MFT2672AEB11, MFT2672AEB12, MFT2672AEM10, MFT2672AEM11, MFT2672AEM12, MFT2672AEW10, MFT2672AEW11, MFT2672AEW12, MFT2673BEB10, MFT2673BEB11, MFT2673BEB12, MFT2673BEM10, MFT2673BEM11, MFT2673BEM12, MFT2673BEW10, MFT2673BEW11, MFT2673BEW12, MFT2776DEE00, MFT2776DEH00, MFT2776DEM00, MFT2776DEM01, MFT2778EEZ00, MFT2976AEB00, MFT2976AEB01, MFT2976AEB02, MFT2976AEB03, MFT2976AEM00, MFT2976AEM01, MFT2976AEM02, MFT2976AEM03, MFT2976AEW00, MFT2976AEW01, MFT2976AEW02, MFT2976AEW03, MFX2876DRE00, MFX2876DRE01, MFX2876DRH00, MFX2876DRH01, MFX2876DRM00, MFX2876DRM01
- Whirlpool: 7WF736SDAM10, 7WF736SDAM11, 7WF736SDAM12, 7WF736SDAM13, WRF736SDAB10, WRF736SDAB11, WRF736SDAB12, WRF736SDAB13, WRF736SDAF10, WRF736SDAF12, WRF736SDAM10, WRF736SDAM11, WRF736SDAM12, WRF736SDAM13, WRF736SDAW10, WRF736SDAW11, WRF736SDAW12, WRF736SDAW13, WRF757SDEE00, WRF757SDEH00, WRF757SDEM00, WRF989SDAB00, WRF989SDAB01, WRF989SDAB02, WRF989SDAB03, WRF989SDAE00, WRF989SDAE01, WRF989SDAE02, WRF989SDAE03, WRF989SDAF00, WRF989SDAF01, WRF989SDAF02, WRF989SDAF03, WRF989SDAH00, WRF989SDAH01, WRF989SDAH02, WRF989SDAH03, WRF989SDAM00, WRF989SDAM01, WRF989SDAM02, WRF989SDAM03
Safety Information
WARNING:
- Always disconnect power to the refrigerator before attempting any repairs or installations. Failure to do so can result in electric shock, injury, or death.
- Wear appropriate personal protective equipment, such as gloves, to prevent injury.
- If you are unsure about any step, consult a qualified appliance technician.
- Ensure all connections are secure and properly insulated after installation.
Setup and Installation
Follow these steps carefully to replace your refrigerator's ice maker unit.
Tools Required:
- Screwdriver (Phillips and/or flathead, depending on your refrigerator model)
- Nut driver or wrench (if applicable)
- Pliers (optional)
Installation Steps:
- Disconnect Power: Unplug the refrigerator from the electrical outlet or turn off the circuit breaker supplying power to the refrigerator.
- Access the Ice Maker: Open the freezer door. The ice maker is typically located in the upper left corner of the freezer compartment. Remove any ice bucket or storage bins to gain full access.
- Remove Old Ice Maker:
- Locate the mounting screws or clips that secure the ice maker to the freezer wall.
- Carefully disconnect the electrical wire harness from the ice maker. This usually involves pressing a tab and pulling the connector apart.
- Remove the mounting screws or release the clips and gently pull the old ice maker unit out of the freezer.
- Prepare New Ice Maker: Unpack the new AZH ice maker replacement unit. Inspect it for any visible damage.
- Install New Ice Maker:
- Align the new ice maker with the mounting brackets or screw holes in the freezer.
- Secure the new ice maker with the mounting screws or clips. Ensure it is firmly in place.
- Connect the electrical wire harness to the new ice maker. Make sure the connection is snug and secure.
- Restore Power: Plug the refrigerator back into the electrical outlet or turn on the circuit breaker.
- Initial Test: Allow several hours for the freezer to cool down and for the ice maker to cycle and produce its first batch of ice. Discard the first few batches of ice to ensure cleanliness and proper operation.

Image 1: The AZH Ice Maker Replacement unit, showing the main body, ice mold, and electrical connectors. This image provides a clear view of the component to be installed.
Operating Instructions
Once installed, the ice maker operates automatically. It will fill with water, freeze the water into ice cubes, and then eject the cubes into the ice bucket. The ice maker has a shut-off arm or sensor that stops ice production when the ice bucket is full.
- First Use: After installation, it may take 12-24 hours for the ice maker to produce its first full batch of ice.
- Discard Initial Ice: It is recommended to discard the first 2-3 batches of ice to flush out any air or impurities from the water line and the new unit.
- Ice Production Rate: The rate of ice production can vary based on freezer temperature, frequency of door openings, and water pressure.
Maintenance
Regular maintenance helps ensure optimal performance and longevity of your ice maker.
- Clean Ice Bucket: Periodically empty and wash the ice bucket with mild soap and water. Rinse thoroughly and dry before returning it to the freezer.
- Check Water Filter: If your refrigerator has a water filter, ensure it is replaced according to the manufacturer's recommendations to maintain water quality and ice production.
- Inspect Water Line: Occasionally check the water supply line for any kinks, leaks, or damage.
- Clean Ice Maker (if necessary): If mineral deposits or mold accumulate, disconnect power and gently clean the ice maker components with a soft cloth and a solution of mild soap and water. Avoid harsh chemicals.
Troubleshooting
If your ice maker is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production |
|
|
| Small or hollow ice cubes |
|
|
| Ice tastes bad or has odor |
|
|
If these steps do not resolve the issue, please contact customer support or a qualified technician.
Specifications
- Brand: AZH
- Model Number: 596.723824102
- Part Number: 596.723824102
- UPC: 824252640377
- Compatible Brands: Kenmore, Ikea, Jenn-Air, KitchenAid, Maytag, Whirlpool (refer to compatibility list for specific models)
- Date First Available: November 24, 2021
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.
For additional assistance, you may visit the AZH brand page on Amazon.





