1. Introduction
This manual provides essential information for the proper use and care of your KoreHealth Kore 2.0 Elite Smartwatch Charging Stand. This stand is designed to securely hold your Kore 2.0 Elite Smartwatch while it charges, offering a stable and convenient placement solution. Please read these instructions carefully before use.
Important Note: This product is a charging stand only. The Kore 2.0 Elite Smartwatch and its magnetic charging cable (dongle) are sold separately and are required for charging functionality.
2. What's in the Box
- 1 x KoreHealth Kore 2.0 Elite Smartwatch Charging Stand
No other components, such as the smartwatch or charging cable, are included with this stand.
Image: The KoreHealth Kore 2.0 Elite Smartwatch Charging Stand, shown with its packaging and a Kore 2.0 Elite Smartwatch placed on it.
3. Setup Instructions
Setting up your KoreHealth Kore 2.0 Elite Smartwatch Charging Stand is a simple two-step process:
- Insert Charging Dongle: Take your Kore 2.0 Elite magnetic charging dongle (sold separately) and snap it securely into the designated slot on the stand. Ensure the charging contacts are facing upwards and the cable exits through the back channel.
- Place Smartwatch: Once the charging dongle is in place, gently rest your Kore 2.0 Elite Smartwatch onto the stand, aligning it with the magnetic charging dongle. The watch should sit securely, allowing the charging contacts to connect.
Image: A visual guide demonstrating the two steps for setting up the charging stand: inserting the charging dongle and then placing the smartwatch.
Image: A close-up view showing how the Kore 2.0 Elite charger securely snaps into the stand, holding it in place.
4. Operating Instructions
The KoreHealth Kore 2.0 Elite Smartwatch Charging Stand provides a stable and ergonomic platform for your smartwatch during charging and display.
- Secure Placement: The stand's sturdy aluminum base and non-slip pads ensure your smartwatch remains stable and secure while charging, preventing accidental movement or falls.
- Optimal Viewing Angle: The stand is designed to hold your Kore 2.0 Elite at an optimal 43-degree angle, allowing for easy viewing of notifications and time without needing to pick up the device.
- Cable Management: Utilize the integrated cable channel at the back of the stand to keep your charging cable tidy and prevent clutter on your desk or nightstand.
Image: A user's Kore 2.0 Elite Smartwatch resting securely on its charging stand next to a laptop, illustrating convenient placement during use.
Image: The ergonomic design of the stand, highlighting its dimensions (3.25 inches high, 2.25 inches wide) and the 43-degree viewing angle for the smartwatch.
Image: A view of the stand's base, showing the non-slip pads and the sturdy aluminum construction designed for stability.
Video Demonstration: KoreHealth Kore 2.0 Charging Stand
Video: This video demonstrates the features of the Kore 2.0 Smartwatch and how its charging dongle integrates with the KoreHealth Charging Stand for convenient charging.
5. Maintenance
To ensure the longevity and appearance of your charging stand, follow these simple maintenance guidelines:
- Cleaning: Wipe the stand with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Placement: Place the stand on a flat, stable surface away from direct sunlight, extreme temperatures, and moisture.
- Handling: Handle the stand with care to prevent scratches or dents to its aluminum surface.
6. Troubleshooting
If you encounter any issues with your KoreHealth Kore 2.0 Elite Smartwatch Charging Stand, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Smartwatch not charging when on stand. | The charging dongle is not properly inserted into the stand, or the smartwatch is not correctly aligned with the dongle's contacts. The charging dongle or cable may be faulty. | Ensure the magnetic charging dongle is fully seated in the stand's slot. Verify that the smartwatch is correctly placed on the dongle, making firm contact. Test the charging dongle and cable independently to confirm they are functional. Remember, the stand itself does not provide power; it only holds the charger. |
| Stand feels unstable or slides. | The stand is on an uneven surface, or the non-slip pads are dirty or worn. | Place the stand on a flat, level surface. Clean the non-slip pads on the bottom of the stand with a damp cloth to restore their grip. |
| Smartwatch does not fit securely on the stand. | The stand is designed exclusively for the Kore 2.0 Elite Smartwatch. It may not be compatible with other models. | Confirm that you are using a Kore 2.0 Elite Smartwatch. This stand is not universally compatible with other smartwatch models. |
7. Specifications
- Model Number: 30795
- Brand: KoreHealth
- Compatible Devices: Kore 2.0 Elite Fitness Tracker / Smartwatch
- Material: Aluminum (base)
- Color: Black
- Item Weight: 50 grams (1.76 ounces)
- Package Dimensions: 3.62 x 2.64 x 2.52 inches (9.19 x 6.71 x 6.40 cm)
- Special Features: Non-slip pads, Matte finish, Cable management channel
Image: The compact and lightweight design of the stand, weighing only 50 grams (1.76 oz), making it suitable for travel.
8. Warranty Information
Specific warranty information for the KoreHealth Kore 2.0 Elite Smartwatch Charging Stand is not provided in the available product data. Please refer to the manufacturer's official website or contact their customer support for detailed warranty terms and conditions.
9. Support
For further assistance, technical support, or inquiries regarding your KoreHealth Kore 2.0 Elite Smartwatch Charging Stand, please visit the official KoreHealth website or contact their customer service department. Contact details are typically found on the product packaging or the manufacturer's website.
Manufacturer: KoreHealth
Date First Available: November 24, 2021
