1. Introduction
This manual provides essential instructions for the safe and efficient use of your Honeywell Moxie V200 Wireless Bluetooth Portable Speaker. Please read this manual thoroughly before operating the device and retain it for future reference.
Image 1.1: Honeywell Moxie V200 Portable Speaker in Olive Green.
2. Package Contents
Verify that all items are present in the package:
- Honeywell Moxie V200 Speaker x1
- USB to micro-USB Quad cable (for playing music and charging) x1
- User Manual x1
- Warranty Card x1
3. Setup
3.1 Charging the Speaker
Before first use, fully charge the speaker. Use the provided USB to micro-USB Quad cable to connect the speaker to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Charging Time: Approximately 3 hours for a full charge.
- Battery Life: Up to 12 hours of playtime on a single charge. Standby time is up to 150 hours.
Image 3.1: Speaker control panel indicating 3 hours charging for up to 12 hours playtime with 5W output.
3.2 Powering On/Off
- To Power On: Press and hold the Power button (usually indicated by a universal power symbol) on the speaker until you hear an audible prompt or see an indicator light.
- To Power Off: Press and hold the Power button again until the speaker powers down.
4. Operating Instructions
4.1 Bluetooth Pairing
The Honeywell Moxie V200 uses Bluetooth V5.3 for seamless wireless connectivity up to 10 meters.
- Ensure the speaker is powered on and in Bluetooth pairing mode (an indicator light may flash, or an audible prompt may sound).
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Honeywell Moxie V200" from the list of devices.
- Once paired, the speaker will indicate a successful connection, and the indicator light may become solid.
Image 4.1: Speaker demonstrating seamless Bluetooth V5.3 connectivity with a 10-meter range.
4.2 True Wireless Stereo (TWS) Pairing
Connect two Moxie V200 speakers for an enhanced stereo sound experience.
- Ensure both Moxie V200 speakers are powered on and not connected to any other Bluetooth device.
- On one speaker (this will be the primary speaker), press and hold the TWS pairing button (refer to the speaker's physical buttons for the specific icon, usually two interlocking circles).
- The speakers will attempt to connect to each other. A successful connection will be indicated by an audible prompt or a change in indicator light status.
- Once TWS paired, connect your device to the primary speaker via Bluetooth as described in Section 4.1.
Image 4.2: Two Moxie V200 speakers demonstrating the Dual Speaker Pairing (TWS) feature.
4.3 Music Playback and Controls
The speaker features button controls for managing audio playback.
- Play/Pause: Press the Play/Pause button (often a triangle or a play/pause symbol).
- Volume Up/Down: Use the '+' and '-' buttons.
- Next/Previous Track: Use the '>>|' and '|<<' buttons.
4.4 Call Functionality
The built-in microphone allows for hands-free calling when connected to a smartphone.
- Answer Call: Press the Play/Pause button when a call comes in.
- End Call: Press the Play/Pause button during a call.
- Reject Call: Press and hold the Play/Pause button when a call comes in.
4.5 Other Connectivity Modes
In addition to Bluetooth, the speaker supports other audio input methods.
- TF Card Playback: Insert a TF (MicroSD) card loaded with audio files into the designated slot. The speaker will automatically switch to TF card mode and begin playback.
- USB/Auxiliary Input: Use the provided USB to micro-USB Quad cable to connect to devices via USB for music playback or auxiliary input from laptops or PCs.
Image 4.3: Speaker highlighting compatible connectivity options including SD Card slot and Type-C input.
5. Maintenance
5.1 Water Resistance (IPX4)
The Moxie V200 speaker is IPX4 rated, meaning it is resistant to splashing water from any direction. This makes it suitable for outdoor use or near water sources, but it should not be submerged.
Image 5.1: Speaker demonstrating IPX4 water and sweat resistance near a pool.
5.2 Cleaning
To clean the speaker, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. Ensure all ports are dry before charging or connecting other devices.
6. Troubleshooting
If you encounter issues with your speaker, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is fully charged. Connect it to a power source and try again. |
| Cannot pair via Bluetooth. | Ensure the speaker is in pairing mode. Turn off Bluetooth on your device and turn it back on. Forget the speaker from your device's Bluetooth list and try pairing again. Ensure no other devices are connected to the speaker. |
| No sound or low volume. | Check the volume levels on both the speaker and your connected device. Ensure the speaker is properly paired. Try playing from a different audio source or device. |
| TWS pairing fails. | Ensure both speakers are powered on and not connected to any other Bluetooth device. Place them close to each other and try the TWS pairing process again. |
| Poor sound quality. | Ensure the speaker is within the 10-meter Bluetooth range of your device. Avoid obstacles between the speaker and your device. Check the audio source quality. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Honeywell |
| Model Name | Moxie V200 |
| Model Number | HC000104/AUD/BTS/V200/OG |
| Speaker Maximum Output Power | 5 Watts |
| Connectivity Technology | Auxiliary, Bluetooth, USB |
| Bluetooth Version | V5.3 |
| Bluetooth Range | 10 Metres |
| Audio Output Mode | Stereo |
| Speaker Type | Bluetooth Speaker |
| Driver Size | 52 Millimetres |
| Control Method | Button |
| Water Resistance Level | IPX4 (Water Resistant) |
| Battery Type | Lithium Ion |
| Battery Capacity | 1200 Milliamp Hours |
| Battery Average Life | 12 Hours |
| Battery Charge Time | 3 Hours |
| Item Weight | 290 Grams |
| Item Dimensions (D x W x H) | 7.3D x 9.7W x 7.3H Centimeters |
| Material | ABS, Acrylonitrile Butadiene Styrene |
| Country of Origin | China |
8. Warranty Information
The Honeywell Moxie V200 Portable Speaker comes with a 2 Years Manufacturer Warranty from the date of purchase. Please retain your purchase receipt and the warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions.
9. Customer Support
For assistance, technical support, or warranty inquiries, please contact Honeywell customer service:
- Toll-Free Number: 1800-120-6838 (Monday to Saturday, 10:00 AM to 7:00 PM)
- Email: Support@honeywellconnection.com
You can also refer to the manufacturer's contact information:
- Manufacturer: Secure Connection Limited, Flat C 61/F, Block A, LA Rossa, Coastal Skyline 12 Tung Chung, Water Front Road Tung Chung, N.T., Hong Kong
- Importer: Creative Peripherals & Distribution Limited Jayem Warehousing Pvt. Ltd., Sumeet Logistics, Building No. C-3, Gala No. 1 to 6A, At Village Kikse-Borivili, Opp. Rajdhani Dhaba, Mumbai-Nasik Highway, District Thane, Bhiwandi-421302.
Image 9.1: Honeywell customer support details, including contact number and email.