1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Termoscud R074-X Leg Cover, designed for the Honda Silver Wing 400 (2015) scooter. This product is an original leg cover featuring the patented S.G.A.S. anti-flotation inflatable system, engineered to enhance rider comfort and protection in various weather conditions.
The Termoscud R074-X is classified as a Personal Protective Equipment (PPE) of Category 1, compliant with CE EN 343:2008 standards, ensuring a high level of protection against rain and cold.
2. Product Features
- S.G.A.S. (Patented Anti-Flotation System): Equipped with a new valve featuring an integrated cap and a watertight screw closure. Inflatable chambers on the lateral edges prevent flapping at high speeds.
- Three-Layer Construction: Ensures stable fit and thermal protection.
- Heavy waterproof nylon exterior with welded seams.
- 100% waterproof inner membrane.
- Faux fur interior for warmth.
- Anti-Theft Ring: (Applicable only to non-screwed models) Provides a secure point for locking.
- Large Storage Pocket: Convenient for carrying small items.
- Integrated Seat Cover: Stored within the harness, useful for parking.
- Reflective Prints: Enhances visibility for improved safety.
- Smart Holder System: Prepared for a waterproof smartphone pouch (sold separately, Code 468).
3. Setup and Installation
Follow these steps to correctly install the Termoscud R074-X Leg Cover on your Honda Silver Wing 400 (2015).
3.1 Attaching the Leg Cover
Position the leg cover over the front and side panels of your scooter, ensuring it aligns with the contours of the vehicle. Secure the straps and attachment points as designed for your specific scooter model. Ensure all straps are snug but not overly tight to avoid damage to the scooter or the cover.
Image 3.1: The Termoscud R074-X Leg Cover correctly installed on a scooter, showing its overall fit.
3.2 S.G.A.S. Anti-Flotation System Inflation
The S.G.A.S. system prevents the leg cover from flapping at high speeds. Locate the S.G.A.S. valve on the side of the leg cover. Use the provided S.G.A.S. adapter to inflate the chambers by mouth or with a pump. Inflate until the chambers are firm, but do not over-inflate. The adapter ensures hygienic inflation and prevents air leakage when closing the valve.
Image 3.2: Detailed view of the S.G.A.S. inflation valve, indicating the maximum pressure.
Image 3.3: Visual instructions demonstrating the process of inflating the S.G.A.S. anti-flotation chambers.
3.3 Additional Attachments
Ensure the anti-theft ring (if present on your model) is accessible for securing the cover when parked. The integrated seat cover can be pulled out from its harness and placed over the scooter seat to protect it from elements when not in use.
Image 3.4: Details showing the storage pocket, the integrated seat cover, and the anti-theft ring for security.
4. Operating Instructions
Once installed, the Termoscud R074-X provides thermal and waterproof protection during your rides. The reflective prints enhance your visibility to other road users.
- Storage Pocket: Utilize the large front pocket for convenient storage of small personal items.
- Seat Cover: When parking, deploy the integrated seat cover to protect your scooter's seat from rain, dust, or sun exposure.
- Smart Holder System: If you have the compatible waterproof smartphone pouch (Code 468, sold separately), attach it to the designated area for easy access to your device.
5. Maintenance
Proper maintenance will extend the lifespan and effectiveness of your leg cover.
- Cleaning: It is recommended to clean the leg cover using a damp cloth.
- Rinsing: Thoroughly rinse any straps or attachment points to remove dirt or debris.
- Drying: Ensure the leg cover is completely dry before storing it.
- Storage: Store the leg cover in a dry place when not in use to prevent mold or material degradation.
6. Troubleshooting
- Leg Cover Flapping at High Speed: Ensure the S.G.A.S. anti-flotation system is properly inflated. Re-inflate the chambers if they feel soft or deflated.
- Water Leakage: Check for any tears or damage to the outer nylon layer or the inner waterproof membrane. Ensure all seams are intact.
- Difficulty Attaching: Verify that the leg cover is correctly aligned with your scooter model (Honda Silver Wing 400, 2015). Ensure all straps and buckles are correctly routed and secured.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | R074-X |
| Compatibility | Honda Silver Wing 400 (2015) |
| Material Composition | 75% Nylon, 22.5% Polyester |
| Construction | Three-layer: Waterproof Nylon Exterior, Waterproof Inner Membrane, Faux Fur Interior |
| Safety Standard | PPE Category 1, CE EN 343:2008 |
| Special Features | Patented S.G.A.S. Anti-Flotation System, Anti-Theft Ring, Large Storage Pocket, Integrated Seat Cover, Reflective Prints, Smart Holder System |
| Manufacturer | farbrothersonline |
8. Warranty and Included Accessories
8.1 Theft Insurance
A complimentary theft insurance for the Termoscud is included with the purchase. This insurance is valid for 1 year (12 months) from the date of purchase and is offered by Tucano Urbano, applicable only in Italy.
8.2 Included Accessories
Your Termoscud R074-X Leg Cover package includes the following:
- Work Gloves (nitrile palm coated)
- Spring Cable with Steel Hooks (bungee cord)
Image 8.1: Included work gloves, featuring nitrile-coated palms for enhanced grip and protection.
Image 8.2: The included spring cable (bungee cord) with steel hooks, useful for securing items.
