Important Safety Information
Please read all instructions carefully before using this space heater. Failure to follow these instructions may result in fire, electric shock, or injury.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater is equipped with a Tip-over Switch and Overheat Safety Protection. If the heater tips over or overheats, it will automatically shut off.
Figure 1: Multiple Safety Features. The Pelonis space heater incorporates ABS UL94 V0 Flame Resistant Material, Over Heating Protection, and a Tip-Over Switch Off for enhanced user safety.
Figure 2: Tip-Over Safety. The heater is designed to automatically shut off if it is accidentally tipped over, preventing potential hazards.
Figure 3: Cool-Touch Handle. The heater features a cool-touch built-in handle for safe and easy relocation, even after operation.
Product Overview
The PELONIS 1500W Tower Space Heater (Model PTH21ERLBB) is designed to provide efficient and comfortable heating for indoor spaces. It features rapid heat-up, multiple safety protections, and user-friendly controls.
Figure 4: Pelonis 1500W Tower Space Heater. A sleek black tower heater emitting warm air.
Key Features:
- 3s Instant Heating: Ceramic heating technology provides quick heat-up in 2-3 seconds.
- Built-In Safety Protections: Includes V0 Flame Resistant Material, Overheat & Tip-over switch safety, and a 12-hour Forced Shutdown feature.
- Adjustable Temperature: LED display allows temperature adjustments from 41°F to 95°F.
- Multiple Heating Settings: Low, Mid, and High heat settings.
- Optional Oscillation: Circulates heat across 65-75° for wider coverage.
- 8-Hour Programmable Timer: Allows for scheduled operation.
- Digital Touch Control & Remote Control: Convenient operation from the unit or from a distance.
- ECO Mode: Automatically adjusts heating based on ambient temperature for energy saving.
- Ultra Quiet Operation: Operates at a low noise level of 42dB.
Figure 5: Product Dimensions. The compact design measures 7.7"D x 6.9"W x 23"H.
Setup
The PELONIS Tower Space Heater requires minimal setup. Follow these steps to prepare your heater for use:
- Unpack the Heater: Carefully remove the heater from its packaging. Retain packaging for future storage if needed.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any walls, furniture, or other objects. Do not place on soft surfaces like rugs or carpets that may block air vents.
- Power Connection: Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use extension cords, power strips, or surge protectors.
Operating Instructions
Your PELONIS Tower Space Heater offers various settings for customized comfort. Control the unit using the digital touch panel on top or the included remote control.
Figure 6: Easy to Use Controls. The heater features both a digital touch panel and a remote control for convenient operation.
Figure 7: Remote Control. Operate your heater settings without getting up using the included remote control.
Control Panel & Remote Functions:
- Power Button (U): Press to turn the heater ON or OFF.
- Mode Button (M): Cycle through heating modes: Low, Mid, High, and ECO.
- Temperature Adjustment (+ / -): Adjust desired temperature from 41°F to 95°F.
- Oscillation Button (~): Activate or deactivate the oscillation function for wider heat distribution.
- Timer Button (L): Set the programmable timer for up to 8 hours of operation.
Detailed Operation:
- Power On/Off: Press the Power button on the control panel or remote. The LED display will illuminate.
- Setting Temperature: Use the '+' or '-' buttons to set your desired temperature. The heater will maintain this temperature.
- Selecting Heating Mode: Press the 'M' button to cycle through Low, Mid, High, and ECO modes.
- Oscillation: Press the oscillation button to start the heater rotating. Press again to stop.
- Setting the Timer: Press the timer button repeatedly to select the desired operating duration (1-8 hours). The heater will automatically shut off after the set time.
Figure 8: Customizable Temperature. Adjust your perfect temperature between 41°F and 95°F.
Figure 9: Wide Range Warming. The heater effectively distributes warmth throughout areas up to 270 sq ft.
Figure 10: ECO Energy-Saving Mode. This mode automatically adjusts heating to optimize energy efficiency based on ambient temperature.
Figure 11: Ultra Quiet Operation. The heater operates as low as 40dB, making it suitable for quiet environments like bedrooms or offices.
Official Product Videos:
Pelonis 1500W Tower Space Heater with Oscillation and Remote
This video provides a comprehensive overview of the Pelonis 1500W Tower Space Heater, demonstrating its oscillation feature and remote control functionality. It highlights the ease of use and effective heating capabilities.
A Remote Control Space Heater?? YES PLEASE
A short video demonstrating the convenience of the remote control for the Pelonis space heater, allowing users to adjust settings from a distance.
Tower Space Heater - Compact Yet A Heating Machine!
This video showcases the compact design and powerful heating capabilities of the Pelonis Tower Space Heater, emphasizing its efficiency in warming spaces.
GREAT Heat Tower - Very Strong
A video highlighting the strong heat output of the Pelonis Tower Space Heater, demonstrating its effectiveness in quickly warming a room.
Maintenance
Regular maintenance ensures optimal performance and longevity of your PELONIS Tower Space Heater.
- Cleaning: Always unplug the heater from the wall outlet before cleaning. Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use cleaning sprays, harsh chemicals, or abrasives.
- Grille Cleaning: Periodically clean the grilles to remove dust and debris. A vacuum cleaner with a brush attachment can be used to gently remove dust from the air intake and exhaust areas.
- Storage: When not in use, store the heater in a cool, dry location. It is recommended to store it in its original packaging to protect it from dust and damage.
Troubleshooting
If your PELONIS Tower Space Heater is not operating correctly, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit; Tip-over switch activated; Overheat protection activated. | Ensure unit is plugged into a working outlet. Check if the heater is on a stable surface. Allow unit to cool down for 30 minutes if it overheated. |
| Heater blows cold air. | Temperature setting is too low; ECO mode is active. | Increase the temperature setting. If in ECO mode, the heater may cycle off if the ambient temperature is close to the set temperature. Change to a different mode if continuous heat is desired. |
| Heater makes unusual noise. | Dust or debris in fan/heating elements. | Unplug the unit and clean the grilles and interior with a vacuum cleaner. |
| Remote control not working. | Batteries are dead or incorrectly inserted. | Replace batteries with new ones, ensuring correct polarity. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PELONIS |
| Model Number | PTH21ERLBB |
| Power Output | 1500 Watts |
| Voltage | 120 Volts (AC) |
| Product Dimensions | 7.7"D x 6.9"W x 23"H |
| Item Weight | 6.95 pounds |
| Heating Coverage | 106-167 square feet |
| Min Temperature Setting | 41 Degrees Fahrenheit |
| Max Temperature Setting | 95 Degrees Fahrenheit |
| Number of Speeds | 3 (Low, Mid, High) |
| Special Feature | Adjustable Temperature, Oscillation, Remote Control, Programmable Thermostat, Timer, Touch Screen, Tip-over Switch, Overheat Safety Protection |
| Included Components | Heater Body |
Warranty Information
PELONIS products are manufactured to the highest quality standards. For specific warranty details regarding your PTH21ERLBB model, please refer to the warranty card included with your purchase or visit the official PELONIS website. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or inquiries about your PELONIS Tower Space Heater, please contact PELONIS customer service. You can also find additional information and a downloadable PDF version of the user manual at the following link:
