1. Introduction
This manual provides instructions for the NKF VSB211Z VSB207 replacement remote control, designed for use with compatible Vizio Home Theater Soundbars. This remote offers full functionality to control your soundbar without the need for complex programming.

Image 1.1: Front view of the NKF VSB211Z VSB207 remote control. This image displays the remote's sleek black design with clearly labeled buttons for power, volume, mute, subwoofer control, input selection, and SRS.
2. Setup: Battery Installation
The NKF VSB211Z VSB207 remote control requires two (2) AAA alkaline batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two (2) new 1.5V AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote is ready for use. No additional programming or setup is required.
3. Operating Instructions
This remote control is designed to function immediately upon battery installation with compatible Vizio soundbar models. Point the remote directly at your soundbar when pressing buttons.

Image 3.1: Angled view of the NKF VSB211Z VSB207 remote control, highlighting the ergonomic design and button layout.
Button Functions:
- Power Button (⏻): Turns the soundbar on or off.
- Volume Up (+): Increases the soundbar's volume.
- Volume Down (-): Decreases the soundbar's volume.
- Mute: Mutes or unmutes the soundbar's audio output.
- Sub - (Subwoofer Down): Decreases the subwoofer level.
- Sub + (Subwoofer Up): Increases the subwoofer level.
- Input: Cycles through available audio input sources on the soundbar.
- SRS: Activates or deactivates the SRS (Sound Retrieval System) audio enhancement feature, if supported by your soundbar.
4. Compatibility
This NKF remote control is compatible with the following Vizio Home Theater Soundbar models:
- VSB211Z
- VSB207
- VSB207E320iA0
If your Vizio soundbar model is not listed, please verify its compatibility before use.
5. Maintenance
To ensure the longevity and proper functioning of your remote control, follow these maintenance guidelines:
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new 1.5V AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.
- Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Disposal: Dispose of used batteries according to local regulations.
6. Troubleshooting
If you experience issues with your remote control, refer to the following common troubleshooting steps:
- Remote Not Responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new 1.5V AAA alkaline batteries.
- Check for any obstructions between the remote and the soundbar's infrared receiver.
- Ensure you are within the effective range and pointing the remote directly at the soundbar.
- Specific Buttons Not Working:
- This remote is a direct replacement and should cover all original functions. If a specific button does not work, ensure your soundbar model is fully compatible.
- Try replacing the batteries, as low power can sometimes affect specific functions.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | VSB211Z VSB207 |
| Brand | NKF |
| Power Supply | 2 x 1.5V AAA Alkaline Batteries (not included) |
| Connectivity Technology | Infrared (IR) |
| Product Dimensions | 4.72 x 3.15 x 0.79 inches (12 x 8 x 2 cm) |
| Item Weight | 3.2 ounces (90.7 grams) |
| Compatible Devices | Vizio Home Theater Soundbars (VSB211Z, VSB207, VSB207E320iA0) |
8. Warranty and Support
This product is manufactured by NKF. For any issues or support inquiries regarding your NKF VSB211Z VSB207 remote control, please contact the seller or manufacturer directly through your purchase platform.
Please note that specific warranty details may vary by retailer or region. Retain your proof of purchase for any warranty claims.