1. Introduction
The Vente-unique FELIX coffee table is designed to enhance your living space with its functional and modern aesthetic. This rectangular table features a two-part design with a contrasting upper and lower section, incorporating two discreet sliding drawers for convenient storage. Constructed from durable MDF, it offers a stable and resilient surface suitable for daily use. This manual provides important information regarding the assembly, operation, maintenance, and specifications of your FELIX coffee table.
2. Safety Information
- Assembly Required: This product requires assembly. Please follow all provided assembly instructions carefully to ensure proper construction and to avoid the risk of accidents or injury.
- Weight Capacity: Do not exceed the maximum load capacity of 50 kg for the tabletop and 5 kg for each drawer. Overloading can cause damage to the product or lead to instability.
- Indoor Use Only: This coffee table is designed for indoor use. Avoid exposure to extreme temperatures, humidity, or direct sunlight, which can damage the material.
- Stable Placement: Ensure the table is placed on a flat, stable surface to prevent wobbling or tipping.
3. Setup & Assembly
3.1. Package Contents
Before beginning assembly, verify that all components and hardware are present. Refer to the separate assembly instructions included in your package for a detailed list of parts.
3.2. Assembly Instructions
- Read Instructions: Carefully read the complete assembly manual provided with your product before starting.
- Prepare Workspace: Clear a spacious area for assembly. Lay out all parts on a soft, clean surface to prevent scratches.
- Follow Steps: Assemble the coffee table step-by-step according to the diagrams and instructions in the dedicated assembly guide. Do not skip steps.
- Tighten Fasteners: Ensure all screws and fasteners are securely tightened. Periodically check and re-tighten fasteners as needed to maintain stability.
- Seek Assistance: If you encounter difficulties or are unsure about any step, contact Vente-unique customer support for assistance.
The FELIX coffee table features a rectangular design with a white top and a light oak base, integrating two functional drawers for storage. Its modern aesthetic complements various living room decors.
4. Operating Instructions
4.1. Using the Drawers
The FELIX coffee table is equipped with two sliding drawers. To open, gently pull the drawer front. To close, push the drawer back until it is fully seated. Avoid forcing the drawers, especially if they feel stiff, to prevent damage to the runners.
4.2. Load Capacity
- The tabletop can support a maximum weight of 50 kg (approximately 110 lbs).
- Each drawer can support a maximum weight of 5 kg (approximately 11 lbs).
Distribute weight evenly across the tabletop and within the drawers to maintain stability and prevent stress on the structure.
5. Maintenance & Care
5.1. Cleaning
- Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
- For spills, clean immediately with a dry cloth to prevent moisture absorption.
5.2. General Care
- Avoid placing hot items directly on the surface. Use coasters or protective pads.
- Protect the table from sharp objects to prevent scratches.
- Periodically check and tighten all assembly hardware to ensure the table remains stable and secure.
6. Troubleshooting
6.1. Table is Wobbly
- Ensure all screws and fasteners are securely tightened.
- Verify that the table is placed on a level surface. Adjust if necessary.
6.2. Drawers Do Not Slide Smoothly
- Check for any obstructions in the drawer runners.
- Ensure the drawer components were assembled correctly according to the instructions.
- Verify that the drawer is not overloaded, exceeding its 5 kg capacity.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vente-unique |
| Model | FELIX |
| Color | Light Natural, White |
| Material | MDF (Wood panel and derivatives) |
| Product Dimensions (L x D x H) | 120 cm x 60 cm x 35 cm |
| Item Weight | 47.3 kg |
| Tabletop Load Capacity | 50 kg |
| Drawer Load Capacity (each) | 5 kg |
| Special Features | Integrated Storage (2 drawers) |
| Use | Indoor |
This image illustrates the key dimensions of the FELIX coffee table: 120 cm in length, 60 cm in depth, and 35 cm in height. These measurements are crucial for planning placement in your living space.
A direct front view of the FELIX coffee table, highlighting the seamless integration of its two sliding drawers within the light oak base. The white tabletop provides a clean contrast.
8. Warranty & Support
8.1. Warranty Information
For details regarding the product warranty, please refer to the warranty documentation included with your purchase or visit the official Vente-unique website. Warranty terms and conditions may vary.
8.2. Customer Support
If you have any questions, require assistance with assembly, or need to report a defect, please contact Vente-unique customer service. Contact information can typically be found on the Vente-unique website or in your purchase documentation.
