Shark QU602QBL_EGB

Shark Logo

Shark APEX UpLight Vacuum Lift-Away DuoClean Self Clean

Model: QU602QBL_EGB

Introduction

The Shark APEX UpLight Vacuum Lift-Away DuoClean Self Clean (Model: QU602QBL_EGB) is a versatile and powerful cleaning solution designed for both hard floors and carpets. This renewed unit features DuoClean technology, which combines a soft roller and a bristle brush to effectively pick up large particles, small particles, and stuck-on dust. The Lift-Away mode allows for portable cleaning of stairs, upholstery, and high-reach areas. Equipped with a Self-Cleaning Brushroll, it actively removes hair wrap as you clean, and the Anti-Allergen Complete Seal captures and traps dust and allergens inside the vacuum.

Shark APEX UpLight Vacuum

Image: The Shark APEX UpLight Vacuum in its upright configuration, showcasing its sleek design and Arctic Blue accents.

Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following:

  • Read all instructions before using this vacuum cleaner.
  • Always turn off the vacuum cleaner before connecting or disconnecting any hose, nozzles, or accessories.
  • Do not use outdoors or on wet surfaces.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Use only as described in this manual. Use only manufacturer's recommended attachments.
  • Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not pick up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
  • Do not use without dust cup and/or filters in place.

Setup and Assembly

Your Shark APEX UpLight Vacuum is designed for easy assembly. Follow these steps to get your vacuum ready for use:

  1. Carefully remove all components from the packaging.
  2. Insert the wand into the floor nozzle until it clicks securely into place.
  3. Slide the handheld vacuum onto the wand until it clicks securely into place.
  4. Wrap the power cord around the cord hooks for storage.
Shark APEX UpLight Vacuum assembled in a living room

Image: The Shark APEX UpLight Vacuum standing assembled in a living room setting, ready for use.

Operating the Vacuum

Powering On/Off

To turn the vacuum on or off, press the power button located on the handheld vacuum unit. The vacuum operates with a cord, providing consistent power during cleaning.

Floor Cleaning Modes (DuoClean Technology)

The DuoClean floor nozzle features two unique brushrolls that work together to clean all floor types. The soft front brushroll pulls in large debris and fine dust, while the bristle brushroll deep cleans carpets.

  • Hard Floor Cleaning: For bare floors and delicate area rugs, the soft roller gently polishes floors while picking up debris.
Woman vacuuming hard floor with Shark APEX UpLight

Image: A person using the Shark APEX UpLight Vacuum to clean a hard floor, demonstrating its effectiveness on various debris.

  • Carpet Cleaning: For low-pile and high-pile carpets, the bristle brushroll engages to pull out embedded dirt and debris.
Woman vacuuming carpet with Shark APEX UpLight

Image: A person using the Shark APEX UpLight Vacuum on a carpeted surface, highlighting its ability to clean different floor types.

Close-up of Shark DuoClean brushrolls

Image: A close-up view of the DuoClean brushrolls, showing the soft front roller and the bristle brush for comprehensive cleaning.

Lift-Away Mode

To clean above-floor areas, simply press the Lift-Away button to detach the handheld vacuum from the wand and floor nozzle. This allows for lightweight, portable cleaning.

Woman using Shark APEX UpLight in Lift-Away mode for high cleaning

Image: A person using the Shark APEX UpLight Vacuum in Lift-Away mode to clean high surfaces, demonstrating its extended reach.

Woman using Shark APEX UpLight in Lift-Away mode on stairs

Image: A person using the Shark APEX UpLight Vacuum in Lift-Away mode to clean stairs, showcasing its portability and ease of use for challenging areas.

Using Attachments

Connect the included brush attachment directly to the handheld vacuum or to the end of the wand for specialized cleaning tasks such as upholstery, crevices, or dusting.

Maintenance

Regular maintenance ensures optimal performance of your Shark APEX UpLight Vacuum.

Emptying the Dust Cup

Empty the dust cup after each use or when debris reaches the MAX FILL line. To empty, press the dust cup release latch and lift the dust cup away from the handheld vacuum. Hold the dust cup over a trash bin and press the bottom empty release button.

Vacuum dust cup component

Image: A component of the vacuum, likely the dust cup or filter housing, illustrating parts involved in debris collection.

Cleaning Filters

The vacuum features Foam and HEPA filters. Rinse the foam and felt filters every 3 months, or as needed, with cold water. Allow them to air-dry completely for at least 24 hours before reinstalling. The HEPA filter should be cleaned once a year, or as needed, by tapping it clean over a trash bin.

Vacuum filter component

Image: A vacuum filter component, demonstrating the type of filter used in the Shark APEX UpLight system.

Engineered to emit clean air diagram

Image: A diagram illustrating how the vacuum is engineered to emit clean air, highlighting the filtration system's effectiveness in trapping dust and allergens.

Brushroll Maintenance

The Self-Cleaning Brushroll is designed to prevent hair wrap. If any hair or debris remains wrapped around the brushroll, continue vacuuming on a hard floor surface, a low-pile carpet, or a small area rug to allow the self-cleaning feature to work. If necessary, carefully remove any remaining debris with scissors.

Troubleshooting

If you encounter issues with your vacuum, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Vacuum not picking up debris or no suction.Dust cup is full. Filters need cleaning. Hose or nozzle is clogged.Empty dust cup. Clean foam and HEPA filters. Check hose, wand, and nozzle for blockages.
Brushroll not spinning.Brushroll is jammed. Vacuum is in Lift-Away mode.Turn off vacuum and remove any obstructions from the brushroll. Ensure vacuum is in upright mode for brushroll operation.
Vacuum turns off on its own.Overheating due to clogged filters or blockages.Turn off vacuum and unplug it. Empty dust cup and clean all filters. Check for blockages in nozzle, hose, and wand. Allow vacuum to cool for at least 45 minutes before restarting.

Specifications

FeatureDetail
BrandShark
Model NumberQU602QBL_EGB
Special FeatureBagless, HEPA
Filter TypeFoam
Included ComponentsBrush
Is Cordless?No
Recommended Uses For ProductCarpet
ColorArctic Blue
ManufacturerShark
Controller TypePush Button
Control MethodApp (Note: This may refer to a companion app for other Shark products, the vacuum itself is push button controlled)
PortableNo (Refers to the full upright unit, but has Lift-Away feature for portable canister)
Indoor/Outdoor UsageIndoor
UPC840133998504
Product Dimensions11.38 x 10.44 x 46.19 inches
ASINB09M9WYDKP

Warranty and Support

This Certified Refurbished product comes with a 90-day warranty, covering manufacturing defects and operational issues under normal use. For any questions, troubleshooting assistance beyond this manual, or to inquire about warranty claims, please contact Shark customer support. Refer to the original packaging or the Shark website for specific contact information.

© 2023 SharkNinja Operating LLC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.