PERLESMITH Full Motion TV Wall Mount Instruction Manual

1. Product Overview

The PERLESMITH Full Motion TV Wall Mount (Model PSMFK1) is designed to securely hold LED, LCD, OLED, and 4K TVs ranging from 26 to 60 inches, with a maximum weight capacity of 77 lbs. This UL-Listed mount features articulating arms, allowing for swivel, tilt, and extension adjustments to achieve optimal viewing angles from various positions in your room. It supports VESA mounting patterns up to 400x400mm and can be installed on single wood studs, concrete walls, or brick walls.

Figure 1: PERLESMITH Full Motion TV Wall Mount (Model PSMFK1)

This image displays the main components of the PERLESMITH Full Motion TV Wall Mount, including the wall plate, articulating arm, and TV mounting plate, all in a black finish.

2. Safety Information

WARNING: Failure to read and understand these instructions may result in serious personal injury, property damage, or voiding of warranty. If you have any questions, please contact customer support.

• Do not exceed the maximum weight capacity of 77 lbs (35 kg).
• Ensure your TV's VESA pattern is compatible (up to 400x400mm).
• This mount is designed for installation on single wood studs, solid concrete, or brick walls. Do not install on drywall alone.
• Always use a stud finder to locate wood studs accurately.
• Verify the structural integrity of the mounting surface before installation.
• Keep all small parts away from children.
• Always have at least two people for installation, especially when lifting the TV.

3. Package Contents

Please check to ensure all components are present and undamaged before beginning installation.

Figure 2: Clearly Labeled Hardware

This image shows the organized packaging of the mount's hardware, with various screws, washers, and spacers clearly labeled for easy identification during assembly.

Mount Components:

• Wall Plate Assembly with Articulating Arm
• TV Brackets (x2)
• VESA Extension Arms (if applicable for larger VESA patterns)

Hardware Kit:

Includes various screws, washers, spacers, and anchors for different TV models and wall types. Refer to the included graphical installation guide for specific hardware identification.

4. Product Specifications

Figure 3: Wide Compatibility

This image illustrates the mount's compatibility with various wall types (single stud, brick, concrete) and its support for TVs up to 60 inches, along with a list of supported VESA patterns.

Figure 4: Reliable Strength

This image highlights the mount's robust construction with a '34% Thicker Arm' and its UL Listing, indicating safety and durability.

5. Installation Guide

This section provides step-by-step instructions for installing your PERLESMITH TV Wall Mount. Please read all steps carefully before proceeding.

5.1 Pre-Installation Checks

1. Check TV Compatibility: Ensure your TV's size (26-60 inches) and weight (up to 77 lbs) are within the mount's specifications. Verify your TV's VESA pattern (mounting holes on the back) matches one of the supported patterns (e.g., 400x400mm, 300x300mm, 200x200mm).
2. Identify Wall Type: Determine if your wall is a single wood stud, solid concrete, or brick. This will dictate the type of hardware and drilling required.
3. Gather Tools: You will need a drill, stud finder (for wood studs), level, pencil, measuring tape, and a Phillips head screwdriver.

5.2 Mounting the Wall Plate

This video demonstrates the unboxing and installation process for the PERLESMITH TV Wall Mount.

1. Mark Drilling Location: Using a stud finder, locate the center of a wood stud. For concrete/brick, choose your desired height. Use a pencil to mark the drilling points for the wall plate.
2. Drill Pilot Holes: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors/lag bolts being used.
3. Secure Wall Plate: Attach the wall plate assembly to the wall using the appropriate lag bolts and washers. Ensure it is level using a spirit level.

Figure 5: Easier Single-Stud Installation

This graphic illustrates the three main steps for single-stud installation: mounting the wall plate, attaching TV brackets, and hanging the TV.

5.3 Attaching TV Brackets

1. Select Screws and Spacers: Choose the correct diameter and length of screws that fit your TV's VESA holes. Use spacers if your TV back is uneven or if cables need extra clearance.
2. Attach Brackets: Secure the TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are oriented correctly (usually with the hooks facing downwards).

5.4 Hanging the TV

1. Lift and Hook: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate assembly.
2. Secure TV: Once the TV is securely hooked, tighten any safety screws or locking mechanisms on the brackets to prevent accidental dislodgement.

5.5 Leveling After Installation

The mount allows for minor post-installation leveling adjustments.

Figure 6: Level After Installation

This image demonstrates the mount's ability to adjust the TV's level by +/-3 degrees after initial installation, ensuring a perfectly straight display.

Adjust the +/-3° level screws on the TV brackets to fine-tune the horizontal alignment of your TV.

6. Operation and Adjustment

Your PERLESMITH Full Motion TV Wall Mount offers versatile adjustments for optimal viewing.

Figure 7: Full Motion Flexibility

This image illustrates the mount's full motion capabilities, including extending up to 19 inches from the wall, swiveling +/-90 degrees, and tilting +15/-5 degrees.

• Extension: Gently pull or push the TV to extend it up to 18.3 inches from the wall or retract it to a slim 2.4 inches.
• Swivel: Pivot the TV left or right up to +/-90° to direct the screen towards your viewing area. The maximum swivel angle may vary based on your TV's size.
• Tilt: Adjust the tilt angle from +5° (upwards) to -15° (downwards) to reduce glare from lights or windows and achieve a comfortable viewing angle.

Figure 8: Perfectly Center Your TV

This image compares the centering capability of this mount versus others, showing how it can perfectly align your TV with your desired viewing axis.

Figure 9: Living Room Application

This image shows the TV mount installed in a living room, demonstrating its clean, low-profile appearance when retracted.

Figure 10: Gym Application

This image illustrates the mount's tilt feature being used in a gym setting to reduce glare, enhancing the viewing experience during workouts.

Figure 11: Kitchen Application

This image shows the mount in a kitchen, highlighting its wide 180-degree swivel range for flexible viewing while cooking or dining.

Figure 12: Corner Mount Solution

This image demonstrates how the articulating arm allows the TV to be positioned effectively in a corner, optimizing space.

7. Care and Maintenance

• Cleaning: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the finish.
• Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
• Lubrication: The articulating joints are designed for smooth movement and generally do not require lubrication. If movement becomes stiff, contact customer support.

8. Troubleshooting

9. Warranty and Support

PERLESMITH stands behind the quality of its products. This TV wall mount is backed by a limited-lifetime replacement pledge.

For any questions, technical support, or warranty claims, please contact PERLESMITH customer service. Our team is available to assist you with installation, troubleshooting, and product inquiries.

Contact information can typically be found on the product packaging or the official PERLESMITH website.