Aiho Queen Bed Frame Instruction Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Ensure all parts are present before beginning assembly.
• Assemble the bed frame on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly.
• Regularly check all connections to ensure they remain tight.
• Do not allow children to climb or play on the bed frame.
• Maximum weight capacity for this bed frame is 880 pounds (400 kg). Do not exceed this limit.

2. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

Image 2.1: All bed frame components laid out.

This image displays all the individual parts of the bed frame, including the upholstered headboard, side rails, footboard, center support beam, and wooden slats, arranged neatly for inspection before assembly.

The package typically includes:

• Upholstered Headboard
• Side Rails (Left and Right)
• Footboard
• Center Support Beam
• Wooden Slats
• Support Legs
• Hardware Pack (screws, bolts, washers, Allen wrench)

3. Setup and Assembly

Assembly typically takes less than an hour for one person. Follow these steps carefully:

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the package contents list and image 2.1 to identify each part.
2. Attach Side Rails to Headboard: Connect the left and right side rails to the upholstered headboard using the provided bolts and Allen wrench. Ensure connections are secure but do not fully tighten yet.
3. Attach Footboard: Connect the footboard to the other ends of the side rails. Once all four corners are connected, gently tighten all bolts.
4. Install Center Support Beam: Place the center support beam along the middle of the frame and secure it to the headboard and footboard. Attach any additional support legs to the center beam if included.
5. Place Wooden Slats: Unroll or individually place the wooden slats across the bed frame. Secure them to the side rails using the provided fasteners or by pressing them into the designated slots. Ensure even spacing for optimal mattress support.
6. Final Tightening: Once all components are in place, go back and firmly tighten all bolts and screws. Do not overtighten.

Image 3.1: Fully assembled bed frame with slats.

This image shows the Aiho Queen Bed Frame fully assembled, featuring the upholstered headboard, side rails, and the sturdy wooden slat system designed to support a mattress without a box spring.

Image 3.2: Detail of the slat support system.

A detailed view of the bed frame's interior, highlighting the robust wooden slats and central support structure that provide a stable foundation for your mattress.

4. Usage Guidelines

The Aiho Queen Bed Frame is designed for comfort and stability. Follow these guidelines for optimal use:

• Mattress Compatibility: This platform bed frame does not require a box spring. Place your queen-sized mattress directly onto the wooden slats.
• Weight Capacity: The bed frame is designed to support a maximum weight of 880 pounds (400 kg), including the mattress and occupants.
• Noise Reduction: The sturdy construction and secure slat system are designed to minimize noise, providing a quiet sleep environment.
• Placement: Position the bed frame on a flat, level surface to ensure stability and prevent wobbling.

Image 4.1: Aiho Queen Bed Frame in use.

A complete view of the Aiho Queen Bed Frame with a mattress and bedding, showcasing its upholstered wingback headboard and overall aesthetic in a bedroom setting.

Image 4.2: Headboard and feet detail.

This image provides a closer look at the elegant upholstered wingback headboard with stitched detailing and the sturdy, low-profile support feet of the bed frame.

5. Maintenance

Proper maintenance will extend the life and appearance of your Aiho Queen Bed Frame.

• Cleaning Upholstery: For general cleaning, gently vacuum the upholstered headboard and side rails with a brush attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner following the product's instructions, testing on an inconspicuous area first.
• Checking Connections: Periodically (e.g., every 3-6 months), inspect all bolts and screws. Tighten any that have become loose to maintain the frame's stability and prevent squeaking.
• Wood Slats Care: Ensure the wooden slats remain dry. If any slats become damaged, contact customer support for replacement options.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals on any part of the bed frame, as this can damage the finish or fabric.

6. Troubleshooting

If you encounter any issues with your bed frame, refer to the following common solutions:

7. Specifications

Detailed specifications for the Aiho Queen Bed Frame:

• Model: B09M8K2CMV
• Brand: Aiho
• Product Dimensions: 83.27"L x 63.19"W x 43.7"H
• Material: Alloy Steel, Engineered Wood, Wood
• Color: Grey
• Maximum Weight Recommendation: 880 Pounds (400 kg)
• Included Components: Headboard, Slats
• Assembly Required: Yes
• Item Weight: 67.9 pounds

Image 7.1: Bed Dimension Diagram.

This diagram illustrates the precise length, width, and height measurements of the Aiho Queen Bed Frame, including the headboard, for accurate space planning.

8. Warranty and Support

Warranty Information: Specific warranty details for the Aiho Queen Bed Frame are not provided in the product listing. Please refer to your purchase documentation or contact the seller directly for warranty terms and conditions.

Customer Support: For any questions, missing parts, or assistance with assembly or troubleshooting, please contact Aiho customer support through the retailer where the product was purchased. Have your model number (B09M8K2CMV) and purchase date ready.