Introduction
Thank you for choosing the eleror Pro X6s Invisible Wireless Earbuds. This manual provides detailed instructions for setting up, operating, and maintaining your earbuds to ensure optimal performance and longevity. Please read this manual thoroughly before use.
Image: The eleror Pro X6s Invisible Wireless Earbuds and their compact charging case.
Package Contents
Ensure all items are present in the package:
- eleror Pro X6s Invisible Wireless Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- Ear Cushions (various sizes)
- User Manual (this document)
Product Overview
The eleror Pro X6s earbuds are designed for discreet and comfortable listening. They feature a semi-in-ear design, Bluetooth 5.0 connectivity, and touch controls.
Image: Earbud dimensions (19mm x 16mm) shown next to a penny for scale, highlighting their compact size.
Image: A close-up of an earbud comfortably seated in an ear canal, demonstrating its discreet fit.
Setup
1. Initial Charging
Before first use, fully charge the earbuds and charging case.
- Place both earbuds into the charging case.
- Close the charging case lid.
- Connect the USB charging cable to the charging port on the case and to a power source.
- Allow approximately 1 hour for a full charge. The indicator lights on the case will show charging status.
Image: Visual instructions for initial charging, wearing the earbuds, and touch controls.
2. Bluetooth Pairing
To connect your earbuds to a device:
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode (indicator lights will flash).
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for "Pro X6s" in the list of available Bluetooth devices.
- Select "Pro X6s" to connect. Once connected, the earbud indicator lights will stop flashing.
- If pairing fails, place the earbuds back in the case, close the lid, wait a few seconds, and repeat the steps.
Image: Diagram illustrating Bluetooth 5.0 technology, emphasizing low power consumption, instant response, and stable transmission.
Operating Instructions
1. Wearing the Earbuds
For optimal sound quality and comfort:
- Identify the Left (L) and Right (R) earbuds.
- Gently insert each earbud into your ear canal.
- Rotate the earbud slightly until it feels secure and comfortable. The semi-in-ear design should sit snugly without causing pressure.
Image: A close-up showing the correct placement of the earbud in the ear for a secure and discreet fit.
2. Touch Controls
The eleror Pro X6s earbuds feature intuitive touch controls. The control functions are generally mirrored on both earbuds unless specified.
| Action | Function (Left Earbud) | Function (Right Earbud) |
|---|---|---|
| Tap Once | Answer/End Call, Play/Pause Music | Answer/End Call, Play/Pause Music |
| Tap Twice | Volume Down | Volume Up |
| Tap Triple | Previous Track | Next Track |
| Press and Hold (2 seconds) | Reject Call, Activate Voice Assistant | Reject Call, Activate Voice Assistant |
| Tap Triple (when disconnected) | Reset Earbud | Reset Earbud |
Image: A visual guide to the touch control functions for answering calls, playing/pausing music, skipping tracks, and activating voice assistant.
3. Power On/Off
- Power On: Open the charging case, or take the earbuds out of the case. They will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
Maintenance
1. Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Gently clean the ear tips and speaker mesh to remove any earwax or debris.
2. Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place, away from extreme temperatures and direct sunlight.
3. Water Resistance (IPX5)
The earbuds are rated IPX5 water resistant, meaning they can resist splashes and sweat. They are not designed for submersion in water or for use during swimming. Ensure earbuds are dry before placing them back in the charging case.
Image: Earbuds shown with water splashing, illustrating their IPX5 water resistance against sweat and light rain.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing | Low battery, out of range, pairing mode not active, previous connection issue. |
|
| Only one earbud working | Earbuds not properly connected to each other or one is not charged. |
|
| Low volume or poor sound quality | Earbuds not seated correctly, ear tips dirty, device volume low. |
|
| Earbuds not charging | Charging cable issue, dirty charging contacts, case low on battery. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Pro X6s |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 15 meters (49 feet) |
| Battery Life (Earbuds) | Up to 6 hours per charge |
| Total Battery Life (with Case) | Up to 24 hours |
| Charging Time | Approximately 1 hour |
| Water Resistance Rating | IPX5 (splash and sweat resistant) |
| Earbud Weight | 3 grams (each) |
| Charging Case Weight | 34 grams |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | 16 dB |
| Impedance | 16 Ohm |
| Control Method | Touch |
| Earpiece Shape | Half In-Ear |
Image: Graphic illustrating the battery life of up to 6 hours per charge for the earbuds and up to 24 hours total with the charging case.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official eleror website. Keep your proof of purchase for warranty claims.