1. Introduction
Thank you for purchasing the Paladone Minions Table Lamp. This LED lamp features the beloved Minion character, Bob, and is designed to provide a soft, ambient light. Please read this manual carefully before use to ensure proper setup and operation.
Package Contents:
- 1 x Paladone Minions Table Lamp
- 1 x Instruction Manual

Image 1.1: The Paladone Minions Table Lamp in a typical room environment.
2. Safety Information
- This product is not a toy. Keep out of reach of small children.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Always insert batteries correctly with regard to polarity (+ and -).
- Remove exhausted batteries promptly.
- Do not expose the lamp to water or extreme temperatures.
- Do not attempt to disassemble or modify the lamp.
3. Setup
Battery Installation:
The Paladone Minions Table Lamp requires 3 x AAA batteries (not included).
- Locate the battery compartment cover on the underside of the lamp.
- Using a small screwdriver (not included), carefully unscrew the battery compartment cover.
- Insert 3 new AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screw.

Image 3.1: Rear view of the Minions lamp, showing the general area where the battery compartment is typically located on the base.
4. Operation
Turning the Lamp On/Off:
Once batteries are installed, the lamp is ready for use.
- To turn the lamp ON, locate the power switch, usually on the base or back of the lamp, and slide it to the 'ON' position.
- To turn the lamp OFF, slide the power switch to the 'OFF' position.

Image 4.1: The Minions lamp illuminated, providing ambient light.
5. Maintenance
Cleaning:
To clean the lamp, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the lamp in water.
Battery Replacement:
When the light dims or stops working, it is time to replace the batteries. Follow the battery installation steps in Section 3 to replace the 3 x AAA batteries.
6. Troubleshooting
- Lamp does not turn on:
- Ensure batteries are inserted correctly with the correct polarity.
- Replace with fresh AAA batteries.
- Check that the power switch is in the 'ON' position.
- Light is dim:
- Batteries may be low. Replace with fresh AAA batteries.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | RD-RS560211 |
| Brand | Paladone |
| Product Dimensions (W x H x D) | 85 x 105 x 98 mm (approximately 11 cm tall) |
| Weight | 142 grams |
| Power Source | 3 x AAA Batteries (not included) |
| Light Type | LED |
8. Warranty and Support
This product is covered by a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please refer to the contact information provided on the product packaging or the official Paladone website.
Note: Warranty terms and conditions may vary by region.





