Introduction
Thank you for choosing the Sorbus Pastel 5-Drawer Fabric Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before assembly and retain them for future reference.
Image: The Sorbus Pastel 5-Drawer Fabric Dresser, featuring a white steel frame and five pastel-colored fabric drawers, positioned next to a bed in a child's room.
Safety Information
- Keep all small parts and packaging materials away from children.
- Ensure all connections are securely fastened before use.
- Do not overload drawers. Distribute weight evenly.
- Place the dresser on a flat, stable surface to prevent tipping.
- Use the included anti-tip kit to secure the dresser to a wall, especially in households with children.
- Do not climb on or allow children to play on the dresser.
Parts List
Please verify that all components are present before beginning assembly.
| Part | Description | Quantity |
|---|---|---|
| A | Top Wood Board | 1 |
| B | Side Steel Frames | 2 |
| C | Back Crossbars | 4 |
| D | Front Crossbars | 4 |
| E | Fabric Drawers (Pastel Multi-color) | 5 |
| F | Adjustable Feet | 4 |
| G | Screws (various sizes) | 1 pack |
| H | Allen Wrench | 1 |
| I | Anti-Tip Kit | 1 |
Note: The exact quantity and type of screws may vary slightly. Refer to the included hardware pack for precise details.
Assembly Instructions
Follow these steps carefully to assemble your Sorbus 5-Drawer Fabric Dresser. It is recommended to assemble on a soft, clean surface to prevent scratches.
Step 1: Prepare the Base
- Attach the adjustable feet (F) to the bottom of the two side steel frames (B).
- Connect the two side steel frames (B) using the bottom front and back crossbars (D and C) with the appropriate screws (G) and Allen wrench (H). Ensure all connections are finger-tight for now.
Step 2: Construct the Vertical Frame
- Continue connecting the remaining front and back crossbars (D and C) between the two side steel frames (B) at the designated heights for each drawer.
- Once all crossbars are in place, fully tighten all screws (G) using the Allen wrench (H) to ensure a stable structure.
Step 3: Attach the Top Wood Board
- Place the top wood board (A) onto the top of the assembled steel frame.
- Secure the top wood board (A) to the frame using the appropriate screws (G).
Step 4: Insert Fabric Drawers
- Unfold each fabric drawer (E) and insert the reinforced base panel into the bottom of each drawer.
- Slide the assembled fabric drawers into their respective slots in the steel frame.
Image: A fully assembled Sorbus Pastel 5-Drawer Fabric Dresser, showcasing its compact size and five colorful drawers.
Step 5: Install Anti-Tip Kit
- Locate a suitable wall stud behind the dresser.
- Attach one bracket of the anti-tip kit (I) to the back of the dresser's top frame using the provided screws.
- Attach the other bracket to the wall stud using the provided screws.
- Connect the two brackets with the strap, ensuring it is taut to prevent tipping.
Important: The anti-tip kit is crucial for safety, especially in homes with children. Always install it.
Operating Instructions
Using the Drawers
- Gently pull the fabric handle to open a drawer.
- Push the drawer back into the frame until it is fully closed.
- Avoid forcing drawers open or closed, as this may damage the fabric or frame.
- To remove a drawer, simply pull it out completely from the frame. Drawers can be folded flat for storage when not in use.
Weight Capacity
- Each fabric drawer is designed to hold lightweight items such as clothing, toys, or accessories.
- Do not exceed approximately 5 lbs (2.2 kg) per drawer to maintain structural integrity and prevent sagging.
- The top wood surface can support light items like lamps, books, or small decorative objects. Do not place heavy items on the top.
Image: A drawer from the Sorbus dresser, showcasing its spacious design, filled with various children's items like crayons, a tablet, and a teddy bear.
Maintenance
Cleaning
- Fabric Drawers: Wipe clean with a damp cloth and mild soap. Allow to air dry completely. Do not machine wash or tumble dry.
- Steel Frame & Wood Top: Wipe with a dry or slightly damp cloth. Avoid harsh chemicals or abrasive cleaners.
General Care
- Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
- Avoid exposing the dresser to direct sunlight or extreme humidity, which can affect the fabric and wood components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser is wobbly. | Screws are loose; uneven floor. | Tighten all screws. Adjust the leveling feet (F) until stable. |
| Drawers do not slide smoothly. | Drawer is overloaded; fabric is caught. | Reduce contents of the drawer. Ensure no fabric is obstructing the sliding path. |
| Dresser appears tilted. | Uneven floor; adjustable feet not properly set. | Adjust the leveling feet (F) on the bottom of the frame to balance the dresser. |
Specifications
- Model: DRW-TL5-PAS
- Brand: Sorbus
- Dimensions: 15.75" L x 11.8" W x 45" H (approximately)
- Drawer Dimensions: 13.75" L x 11" W x 8.25" H (approximately)
- Weight: 17.2 Pounds
- Material: Alloy Steel, Engineered Wood (MDF), Non-woven (Polyester) Fabric
- Number of Drawers: 5
- Color: Pastel
- Assembly Required: Yes
- Care Instructions: Wipe with Dry Cloth (for frame/top), Damp Cloth (for fabric drawers)
Image: A diagram showing the compact size and dimensions of the Sorbus 5-Drawer Fabric Dresser: 45 inches high, 11.8 inches deep, and 15.75 inches wide.
Warranty and Support
For any questions, missing parts, or concerns regarding your Sorbus Pastel 5-Drawer Fabric Dresser, please contact Sorbus customer support. While specific warranty details are not provided in this manual, most products come with a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or the manufacturer's website for detailed warranty information and contact options.
Visit the official Sorbus Store for more information: Sorbus Store
