1. Introduction
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your SAN HIMA Universal Soft Roof Rack Pad. Please read all instructions carefully before use to ensure proper functionality and to prevent damage to your vehicle or cargo.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 Pair SAN HIMA Universal Soft Roof Rack Pads
- 2 Quick Loop Straps
- 2 Tie-Down Ropes
- 4 Door Hooks
- 1 Tote Bag
3. Setup Instructions
The SAN HIMA Soft Roof Rack Pad is designed for universal fit on most cars, 4x4s, or SUVs, with or without pre-installed roof rails. Installation is straightforward:
- Prepare Vehicle: Open all car doors to access the roofline.
- Position Rack Pads: Place the soft roof rack pads across the car roof, ensuring they are evenly spaced and aligned. The pads should sit directly on the roof or on existing roof rails if present.
- Secure Rack Pads: Thread the integrated tie-down straps (with cam lock buckles) through the car interior, around the roof, and secure them tightly. Ensure the cam lock buckles are protected by their EVA sleeves to prevent scratching.
- Check Stability: Once secured, gently tug on the rack pads to ensure they are firmly attached and do not shift.
4. Operating Instructions (Securing Your Load)
The soft roof rack pad has a maximum load capacity of 132 lbs (60 kg). Ensure your cargo does not exceed this limit. Use the provided accessories to secure your items:
- Place Cargo: Carefully place your kayak, canoe, surfboard, paddleboard, or skis onto the soft roof rack pads. Ensure the weight is distributed evenly.
- Use Quick Loop Straps: For additional security, especially for items like kayaks, utilize the quick loop straps. These can be used to create anchor points for tie-down ropes.
- Apply Tie-Down Ropes: Use the tie-down ropes to firmly secure your cargo to the roof rack pads and the vehicle. Ensure ropes are taut and knots are secure. The EPE foams within the pads provide cushioning and help minimize noise and vibrations during transit.
- Door Hooks (Optional): The door hooks can be used to create additional tie-down points by hooking them into the door frame.
- Final Check: Before driving, double-check all straps and ropes to ensure the cargo is completely secure and will not shift or come loose.
5. Maintenance
Proper maintenance ensures the longevity and performance of your soft roof rack pad:
- Cleaning: The 600D Oxford fabric is easy to clean. If it gets dirty, simply spray it with water to remove dirt or grime.
- Drying: The EPE foams encased within the fabric do not absorb water, allowing for quick drying. Ensure the rack pads are dry before storing to prevent mildew.
- Storage: This universal roof rack is foldable and does not have a rigid frame, making it easy to store. Use the included tote bag for convenient storage when not in use.
- Inspection: Periodically inspect all straps, buckles, and fabric for any signs of wear, tear, or damage. Replace components if necessary.
6. Troubleshooting
If you encounter issues with your SAN HIMA Soft Roof Rack Pad, consider the following:
- Rack Pads Shifting: Ensure the integrated tie-down straps are tightened sufficiently. Re-adjust and re-tighten if necessary.
- Cargo Not Secure: Verify that all tie-down ropes and quick loop straps are correctly applied and tightened. Ensure knots are secure and there is no slack.
- Noise/Vibrations: While the EPE foams minimize these, ensure the rack pads are positioned correctly and cargo is tightly secured to reduce any movement that could cause noise.
- Scratches on Vehicle/Cargo: Confirm that the EVA sleeves on the cam lock buckles are properly positioned to protect surfaces. Ensure the soft base of the rack pads is clean and free of debris that could cause scratches.
For persistent issues not covered here, please contact SAN HIMA customer support.
7. Specifications
Key specifications for the SAN HIMA Universal Soft Roof Rack Pad:
| Attribute | Value |
|---|---|
| Brand | SAN HIMA |
| Model Number | SOFT-ROOF-07RACK-VOR |
| Vehicle Service Type | Car, SUV |
| Material | 600D Oxford Fabric / EPE Foam |
| Maximum Load Capacity | 132 pounds (60 kg) |
| Mounting Type | Tie Down Mount, Door Mount, Strap Mount |
| Color | Black |
| Waterproof | No |
| Ambient Temperatures | -30°C (-22°F) ~ +50°C (122°F) |
| Gross Weight | 3.31 pounds (1.50 kg) |
| Package Dimensions | 17.52"L x 6.18"W x 11.61"H (44.5cm x 15.7cm x 29.5cm) |
8. Warranty and Support
Specific warranty information for the SAN HIMA Universal Soft Roof Rack Pad is not provided in this manual. For warranty details, technical support, or any inquiries, please contact SAN HIMA customer service directly through their official website or the retailer where the product was purchased.