1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your UltraPoi OrbPoi Pro Set. This set includes LED Contact Poi Balls with UltraKnob Pro Handles, designed for flow arts enthusiasts of all skill levels. Please read this manual thoroughly to ensure proper use and enjoyment of your product.
Image 1.1: UltraPoi OrbPoi Pro Set with LED UltraKnob Pro Handles.
2. What's Included
Your UltraPoi OrbPoi Pro Set comes with the following components:
- 2x OrbPoi Cases
- 2x Ultra Knob
- 2x UltraKnob Pro LED Shells
- 2x OrbPoi Pro LED Shells
- 1x Braided Rope
- 1x S-Hook Clip
- 2x Dual Head Micro USB Cable
- 1x Gear Bag
- 1x Instruction & Color Guide
Image 2.1: All components included in the UltraPoi OrbPoi Pro Set.
Image 2.2: Detailed view of OrbPoi Pro components.
3. Setup
3.1 Charging the OrbPoi Pro
The OrbPoi Pro features rechargeable batteries. To charge, gently push the rope towards the ball to expose the plastic orb shell. You can also pull on the shell from the other side. Once the Micro USB port is exposed, plug in the provided dual-head Micro USB cable. The UltraKnob Pro LED handles are charged in the same manner.
3.2 Adjusting Rope Length
The braided rope can be adjusted to your desired length. To do this, expose the plastic shell of the poi (as described for charging). Then, pull the entire shell out. Remove the O-rings to separate the shell. You can then use the extra rope provided to customize the length. Measure your desired length, cut the rope with sharp scissors, and heat the tip with a lighter to form a melted cap on the end. Use the original ropes as a guide for setup.
3.3 Video Guide: Setup & Features
Video 3.1: This video demonstrates the setup, charging, button controls, and rope adjustment for the UltraPoi OrbPoi Pro Set.
4. Operating Instructions
The OrbPoi Pro features intuitive button controls for managing color modes and flash patterns. The controls for both the poi heads and the handles operate identically.
4.1 Power On/Off (Button Lock Feature)
- To Turn On: Click the button twice within a 3-second window. This
