Beast Kingdom Sorcerer’s Apprentice DS-018EX D-Stage Series Statue Instruction Manual

Introduction

This manual provides essential information for the proper setup, display, and care of your Beast Kingdom Sorcerer’s Apprentice DS-018EX D-Stage Series Statue. Please read these instructions carefully to ensure the longevity and enjoyment of your collectible.

Safety Information

• This product is a collectible statue and not a toy. It is intended for display purposes only.
• Recommended for ages 15 years and up. Keep out of reach of small children due to small parts which may pose a choking hazard.
• Handle the statue with care to avoid accidental drops or damage.
• Avoid placing the statue in direct sunlight or near heat sources, as this may cause discoloration or material degradation.
• Do not use harsh chemicals or abrasive materials for cleaning.

Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• Figure (Sorcerer’s Apprentice DS-018EX D-Stage Series Statue)

Setup

1. Unboxing: Carefully remove the statue from its packaging. Retain the original packaging for future storage or transport.
2. Inspection: Inspect the statue for any signs of damage or manufacturing defects. If any issues are found, contact customer support immediately.
3. Placement: Choose a stable, flat surface for display. Ensure the location is free from excessive vibrations, direct sunlight, and extreme temperature changes.

Image 1: Front view of the Sorcerer’s Apprentice DS-018EX D-Stage Series Statue. This image displays Mickey Mouse in his iconic sorcerer's hat and robe, standing on a rock formation amidst a magical wave, with enchanted brooms visible on a winding staircase. The base resembles an open book.

Display and Operation

The Sorcerer’s Apprentice DS-018EX D-Stage Series Statue is designed as a static display piece. No assembly or operational steps are required beyond careful placement.

• Ensure the display surface is level to prevent the statue from tipping.
• Periodically check the statue's stability, especially if displayed in an area prone to vibrations.
• To appreciate the intricate details, consider displaying the statue with adequate lighting.

Image 2: Side view of the Sorcerer’s Apprentice DS-018EX D-Stage Series Statue. This perspective emphasizes the dynamic flow of the magical water wave and the detailed brooms carrying buckets up the stairs, all surrounding Mickey Mouse.

Image 3: Rear view of the Sorcerer’s Apprentice DS-018EX D-Stage Series Statue. This angle provides a view of the back of Mickey Mouse, his sorcerer's robe, and the intricate details of the magical effects and the book-shaped base from behind.

Image 4: Close-up view of Mickey Mouse from the Sorcerer’s Apprentice DS-018EX D-Stage Series Statue. This detailed shot highlights Mickey's determined expression, his sorcerer's hat, and the swirling magical stars emanating from his hands.

Maintenance

To keep your statue in pristine condition, follow these maintenance guidelines:

• Dusting: Regularly dust the statue with a soft, dry brush or a microfiber cloth. For intricate areas, a soft-bristled paintbrush can be used.
• Cleaning: If deeper cleaning is required, lightly dampen a soft cloth with plain water. Gently wipe the surface and immediately dry with another soft, dry cloth. Avoid using cleaning sprays, solvents, or abrasive cleaners.
• Handling: Always handle the statue by its base to minimize contact with painted surfaces and delicate details.

Troubleshooting

This section addresses common concerns you might encounter with your collectible statue.

• Dust Accumulation: If dust is difficult to remove from crevices, use a can of compressed air (held upright and at a distance) or a very soft, dry brush.
• Minor Scratches/Marks: For very minor surface marks, avoid attempting to clean with harsh chemicals. Consult a professional if the damage is significant.
• Statue Instability: Ensure the display surface is completely flat and stable. If the statue feels wobbly, reposition it or place it on a more secure surface.

Specifications

Warranty and Support

For information regarding warranty coverage or to contact customer support for assistance with your Beast Kingdom product, please refer to the official Beast Kingdom website or the retailer from whom the product was purchased. Please retain your proof of purchase for any warranty claims.