RUBOT P02 Car Vacuum Cleaner Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your RUBOT P02 Car Vacuum Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

Package Contents

Verify that all items listed below are included in your package:

• RUBOT P02 Car Vacuum Cleaner Unit
• Brush Head Attachment
• Crevice Nozzle Attachment
• Blowing Hose Attachment
• Type-C Charging Cable
• Storage Bag
• Little Brush (for cleaning)
• Spare Filter (1 extra)

Image: Contents of the RUBOT P02 package, including the vacuum unit, various nozzles, charging cable, storage bag, and cleaning brush.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:

• Do not operate the vacuum cleaner with a damaged cord or plug.
• Do not use the vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not immerse the vacuum cleaner in water or other liquids.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Unplug from outlet when not in use and before servicing.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Setup and Initial Use

Charging the Vacuum Cleaner

Before first use, fully charge the vacuum cleaner. The device is not fully charged upon delivery due to storage and transport requirements.

1. Connect the Type-C charging cable to the charging port on the vacuum cleaner.
2. Connect the other end of the USB cable to a suitable USB power adapter (not included) or a car USB port.
3. The LED indicators on the vacuum cleaner will show the charging status. A full charge typically takes approximately 3 hours.
4. Once fully charged, disconnect the charging cable.

Image: The RUBOT P02 vacuum cleaner being charged via its USB-C cable, shown connected in a car's USB port and to a wall adapter.

Attaching Accessories

Select the appropriate attachment for your cleaning task:

• Brush Head: Ideal for carpets, upholstery, and picking up pet hair.
• Crevice Nozzle: Designed for reaching narrow gaps and hard-to-reach areas, such as between car seats or console gaps.
• Blowing Hose: Used to blow dust out of hidden corners or crevices before vacuuming.

To attach, simply push the desired nozzle onto the vacuum's intake opening until it is secure.

Operating Instructions

Powering On/Off

Press the power button located on the handle to turn the vacuum cleaner on. Press it again to turn it off.

Cleaning Tips

• For general debris, use the vacuum without any attachment or with the brush head.
• For tight spaces, attach the crevice nozzle.
• To dislodge dust from vents or tight corners before vacuuming, use the blowing hose.
• Ensure the dust cup is not overfilled for optimal suction performance.

Image: Demonstrates the RUBOT P02 vacuum cleaner in use, showing the blowing hose, brush nozzle, and long flat nozzle for various car cleaning tasks.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

Emptying the Dust Cup

Empty the dust cup after each use or when the debris reaches the MAX fill line.

1. Twist the dust cup counter-clockwise to detach it from the main unit.
2. Carefully empty the contents into a waste bin.

Cleaning the Filters

The RUBOT P02 features a 3-layer filtration system: a stainless steel filter, an H11 HEPA filter, and a sponge filter. These filters are washable and reusable.

1. After emptying the dust cup, remove the filter assembly.
2. Unscrew the metal filter from the HEPA filter.
3. Rinse the stainless steel filter, HEPA filter, and sponge filter under running water until clean.
4. Allow all filter components to air dry completely before reassembling. Do not use the vacuum cleaner with wet filters.
5. Reassemble the filters and reattach the dust cup to the main unit by twisting clockwise until secure.

Image: A step-by-step visual guide demonstrating how to release the dust container, remove the filter, unscrew the metal filter, wash the HEPA filter, and air dry the filter components.

Image: An exploded diagram illustrating the 3-layer filtration technology of the RUBOT P02, highlighting the stainless steel filter, H11 HEPA filter, and sponge filter, along with two identical replacement filters.

Troubleshooting

Specifications

Warranty and Support

RUBOT offers a 12-month warranty for this product. For warranty claims, technical support, or customer service inquiries, please contact RUBOT customer service through the retailer where the product was purchased or visit the official RUBOT website.

Please have your model number (P02) and proof of purchase ready when contacting support.

Product Disposal

This product contains a built-in lithium-ion battery. Do not dispose of the product with general household waste. Please follow local regulations for the recycling of electronic products and batteries. Proper disposal helps prevent potential negative consequences for the environment and human health.